Search Results (171)

Defects arising from the 3D printing process of continuous fiber-reinforced thermoplastic composites primarily hinder their overall performance. These defects particularly include twisting, folding, and breakage of the fiber bundle, which are induced by printing trajectory errors. This study presents a follow-up theory assumption to address such issues, elucidates the formation mechanism of printing trajectory errors, and examines the impact of key geometric parameters—trace curvature, nozzle diameter, and fiber bundle diameter—on these errors. An error model for printing trajectory is established, accompanied by the proposal of a trajectory error compensation method premised on maximum printable curvature. The presented case study uses CCFRF/PA as an exemplar; here, the printing layer height is 0.1~0.3 mm, the fiber bundle radius is 0.2 mm, and the printing speed is 600 mm/min. The maximum printing curvature, gauged by the printing trajectory of a clothoid, is found to be 0.416 mm⁻¹. Experimental results demonstrate that the error model provides accurate predictions of the printed trajectory error, particularly when the printed trajectory forms an obtuse angle. The average prediction deviations for line profile, deviation kurtosis, and deviation area ratio are 36.029%, 47.238%, and 2.045%, respectively. The error compensation effectively mitigates the defects of fiber bundle folding and twisting, while maintaining the printing trajectory error within minimal range. These results indicate that the proposed method substantially enhances the internal defects of 3D printed components and may potentially be applied to other continuous fiber printing types. Full article

Background/Objectives: Previous studies have reported satisfactory outcomes and low rates of instrumentation-related complications (IRCs) following nonfusion posterior fixation in patients with metastatic spinal tumors (MSTs). However, to adequately assess the longevity and durability of nonfusion instrumentation in patients with longer life expectancy, an extended follow-up period is essential. This study aims to evaluate the incidence of and risk factors for IRCs in patients with MSTs who underwent nonfusion posterior fixation and had radiographic follow-up data available for at least one year postoperatively. Methods: Consecutive data were collected from patients who underwent pedicle screw-based posterior fixation without fusion for MSTs in the thoracic and/or lumbar region from 2005 to 2018. The IRCs included screw loosening, screw pull-out, and metal breakage. The IRC-free survival and related factors were analyzed by Kaplan–Meier survivorship analysis with the log-rank test within a minimum follow-up period of one year. A multivariate analysis was performed using a Cox proportional-hazards regression model. Results: In total, 61 patients were included. The mean follow-up period was 28.3 months (range: 12.0–102.6 months). There were 27 cases (44.2%) of IRCs, including 22 cases of screw loosening, four cases of screw pull-out, and one case of rod breakage, at an average of 9.6 months (range: 1.0–38.1 months). The median IRC-free survival was 38.1 months (range: 1.0–102.6 months). Only three patients experienced pain aggravation with IRCs. No revision surgery was performed. A multivariate analysis identified that fixation length was a risk factor for IRCs (odds ratio: 0.358, 95% confidence interval: 0.114–0.888; p = 0.027). Conclusions: IRCs are frequent but mostly asymptomatic after nonfusion posterior fixation in patients with MSTs followed up for at least one year. Overall, the IRC-free survival was long enough considering the patient survival. Fixation length was a significant risk factor for IRCs regardless of MST location. Full article

Natural mating colony cages are crucial in poultry breeding, yet breed-specific management requires further investigation. We evaluated the effects of sex ratios, stocking densities, and cohabitation age on Lohmann Pink-shell breeders’ performance. A total of 6126 birds were randomly allocated to experimental groups with varying ratios (1:8–1:13), densities (582–748 cm²/bird), and cohabitation ages (120/140 days), each containing six replicates. We monitored male mating frequencies at 50 weeks in 1:8 and 1:10 ratio groups. All 120-day-old groups showed delayed production onset and superior male weight compliance (p < 0.01), with reduced egg breakage and increased healthy chick output (p < 0.01). Lower stocking densities (748/694 cm²/bird) showed lower breakage rate and uniformity than 582 cm²/bird (p < 0.05). The 1:10 sex ratio achieved optimal egg production and fertilization rate (p < 0.05). Male mating peaked between 16:00 and 18:00. Optimal parameters were 120-day age of cohabitation, 694 cm²/bird density, and 1:10 sex ratio, providing theoretical guidance for natural mating colony cage development in layer breeding. Full article

Bio-polyurethane foam was synthesized in this study using bio-polyol derived from liquefied waste wood as a sustainable alternative to petroleum-based polyols. It has been widely reported that polyurethane foams incorporating liquefied wood exhibit biodegradability when buried in soil, with assessments typically relying on CO₂ emission measurements in a close system. However, this method cannot obtain any chemical bonding breakage information of the bio-polyurethane foam. On the other hand, our study investigated the biodegradation process by employing an elemental composition analysis using a CHN coder and functional group analysis through Fourier transform infrared (FT-IR) spectroscopy to capture chemical structure changing. The results demonstrated that biodegradation occurs in three different stages over time, even in the absence of significant early-stage weight loss. The gradual breakdown of urethane bonds was confirmed through changes in the elemental composition and functional group ratios, providing a more detailed understanding of the degradation mechanism. These findings suggest highlighting the importance of complementary chemical analytical techniques for a more accurate evaluation. On the other hand, TG data showed that bio-polyurethane foams remained thermally stable even after biodegradation occurred. Full article

Calcareous sands are widely distributed across the South China Sea’s continental shelf and coastlines. Understanding their mechanical behavior and microstructural evolution under cementation is critical for coastal engineering applications. While previous studies have investigated cemented calcareous sands, the comparative analyses of particle breakage and microstructural characteristics between cemented and pure sands remain limited. This study combines triaxial compression tests with X-ray CT scanning and Digital Volume Correlation analysis to systematically examine both material types. Pre- and post-loading CT scans enabled the detailed tracking of microstructural transformations. Results demonstrate that cemented specimens exhibit higher strength–stiffness properties with strain-softening behavior compared to pure sand under 200 kPa confining pressures. A quantitative analysis revealed greater particle breakage in cemented sand, while pure sand showed more pronounced increases in particle sphericity and the aspect ratio during deformation, accompanied by reduced porosity variation along specimen height (coefficient of variation decreased from 15.2% to 12.8% for pure sand. Microstructural analysis indicated moderate increases in pore sphericity and reduced anisotropy in both materials. Fractal dimension analysis demonstrated more significant structural reorganization in cemented sands. Both materials exhibited increases in key morphological parameters, including the throat equivalent radius, channel length, pore equivalent radius, and coordination number, with changes being more substantial in cemented sands. Within shear band regions, cemented sands displayed marked reductions in pore and throat quantities. These findings elucidate fundamental relationships between cementation effects and micro–macro mechanical responses, providing theoretical support for geotechnical applications involving calcareous sands. Full article

Composite pressure vessels offer significant advantages over traditional metal-lined designs due to their high strength-to-weight ratio, corrosion resistance, and design flexibility. This study investigates the structural design, winding process, finite element analysis, and experimental validation of a glass fiber-reinforced composite low-pressure vessel. A high-density polyethylene (HDPE) liner was designed with a nominal thickness of 1.5 mm and manufactured via blow molding. The optimal blow-up ratio was determined as 2:1, yielding a wall thickness distribution between 1.39 mm and 2.00 mm under a forming pressure of 6 bar. The filament winding process was simulated using CADWIND software (version 10.2), resulting in a three-layer winding scheme consisting of two helical layers (19.38° winding angle) and one hoop layer (89.14°). The calculated thickness of the composite winding layer was 0.375 mm, and the coverage rate reached 107%. Finite element analysis, conducted using Abaqus, revealed that stress concentrations occurred at the knuckle region connecting the dome and the cylindrical body. The vessel was predicted to fail at an internal pressure of 5.00 MPa, primarily due to fiber breakage initiated at the polar transition. Experimental hydrostatic burst tests validated the simulation, with the vessel exhibiting failure at an average pressure of 5.06 MPa, resulting in an error margin of only 1.2%. Comparative tests on vessels without adhesive sealing at the head showed early failure at 2.46 MPa, highlighting the importance of head sealing on vessel integrity. Scanning electron microscopy (SEM) analysis confirmed strong fiber–matrix adhesion and ductile fracture characteristics. The close agreement between the simulation and experimental results demonstrates the reliability of the proposed design methodology and validates the use of CADWIND and FEA in predicting the structural performance of composite pressure vessels. Full article

The application of construction and demolition waste (CDW) as roadbed filler faces challenges due to the variable mechanical properties caused by fragile recycled brick aggregates. This study elucidates the breakage mechanism of CDW fillers under compaction effort through a combination of standardized laboratory compaction tests and discrete element method (DEM) simulations. Furthermore, the breakage evolution patterns of mixed fills comprising recycled concrete and brick aggregates at various mixing ratios were revealed. A DEM model was developed to characterize recycled concrete and brick aggregates, adopting polygonal clumps for particles >4.75 mm and spherical clumps for finer fractions. The results indicate that particle breakage progresses through three distinct stages: linear fragment stage (0–200 kJ/m³, 50% of total breakage), deceleration growth stage (200–1000 kJ/m³, 38% of total breakage), and residual crushing stage (1000–2684.9 kJ/m³, 12% of total breakage). Recycled concrete aggregates form a skeleton restraining deep cracks, while brick aggregates enhance stability through energy dissipation and void filling. However, exceeding 30% brick content impedes skeleton development. Critically, a 30% brick content optimizes performance, achieving peak dry density with 25% lower compression deformation than concrete-only fillers, while limiting breakage index rise. These results provide a science-based strategy to optimize CDW roadbed design, improving recycling efficiency and supporting sustainable infrastructure. Full article

With the advancement of aero-engine thrust-to-weight ratios, turbine blades now incorporate complex hollow structures fabricated using ceramic cores. The emergence of light-curing 3D printing technology for ceramic cores offers a viable solution to producing such complex structural components. To avoid the breakage of the core when removing the support after the printing of the general paste, we used a rheological additive, organic bentonite, to prepare a light-curing 3D-printed silicon-based ceramic core paste that can allow for unsupported printing. This study pursues two primary research objectives: Firstly, the effect of organic bentonite on the rheological behavior and stability properties of silicon-based ceramic was investigated. Secondly, we conducted a comprehensive analysis of how organic bentonite modification influences the performance of silicon-based ceramics. The results show that, firstly, the addition of organic bentonite dramatically improves the rheology and stability of silicon-based ceramic paste, and that the optimal content is between 1 and 2 wt.% for the best effect. Second, after the primary sintering process (1250 °C), partial bentonite can produce a small amount of cordierite phase and promote the generation of cristobalite. The room-temperature performance of the ceramic core can be improved. However, organic bentonite, after secondary sintering at 1550 °C, completely forms cordierite and reduces the amount of square quartz produced. Then, it negatively affects the high-temperature performance of the ceramic core. Therefore, when the content of organic bentonite is 1 wt.%, the ceramic paste has superior rheology and stability, making unsupported printing possible. Our study revealed an apparent porosity of 32.43%, a bulk density of 1.64 g/cm³, a sintering shrinkage value of 2.94%, a room-temperature flexural strength of 24.7 MPa, a high-temperature (1550 °C) flexural strength of 10.1 MPa and a high-temperature deflection of 1.24 mm, which meet the requirements of core printing. Full article

In this study, Candida utilis, Lactobacillus plantarum, and non-starch polysaccharide enzymes (cellulase, laccase, β-glucanase, xylanase, and mannanase) were employed to examine the effects of various microorganism–enzyme combinations on the nutritional composition, fiber structure, and fermentation quality of corn stover and wheat straw. Furthermore, the synergistic effects of these treatments were assessed through the use of in vitro rumen fermentation. The results showed that the microorganism–enzyme combinations significantly increased the crude protein content (p < 0.05), while reducing the acid detergent fiber and neutral detergent fiber levels (p < 0.05) in both substrates. The fermentation broth pH decreased (p = 0.06 for corn stover; p < 0.05 for wheat straw) as a result of the treatments, with a significant increase in the lactate concentration (p < 0.05). The reducing sugar levels varied across the treatments (p < 0.05). Mycotoxin analysis revealed trace amounts of zearalenone, well below the Chinese feed hygiene standard. Scanning electron microscopy showed structural modifications, including fiber breakage and surface wrinkling, in the treated substrates. In vitro rumen fermentation demonstrated significant changes in the NH₃-N production and volatile fatty acid profiles (p < 0.05). In conclusion, the addition of different microorganism–enzyme combinations can effectively improve the nutritional composition, fiber structure, and fermentation quality of corn stover and wheat straw. Among the treatments, the T3 group (25% each of C. utilis, L. plantarum, cellulase, and laccase, with a total addition ratio of 0.3% w/w) exhibited the most pronounced improvement in nutritional value for both corn stover and wheat straw. These findings suggest that microorganism–enzyme combinations effectively enhance the nutritional and fermentative quality of agricultural residues. Full article

Background/Objectives: Breast cancer is the most prevalent cancer in adult women. Currently, new therapies and protein determinations with prognostic value are under development. Fascin (encoded by the FSCN1 gene) is an actin-binding protein that is critical for the development of cytoplasmic projections that are essential for tumor invasion. DNA topoisomerase 2-alpha (TOP2A) is a nuclear protein crucial for ATP-dependent breakage, passage, and rejoining of double-stranded DNA and cell division. Both proteins are associated with higher proliferation rates and worse prognosis in breast cancer and together can provide comprehensive information on prognosis and treatment response. Methods: We simultaneously assessed fascin expression and TOP2A/CEP17 DNA copy number ratios in various histological and molecular subtypes. Additionally, these markers were analyzed along with previously established diagnostic markers and other relevant clinical data. Results: Our series included 265 patients, four of whom were male, and all of which were diagnosed with breast carcinoma. Of the 265 patients initially included, sufficient material for analysis was available for 175 cases, as some samples were excluded because of insufficient tissue quantity, poor preservation, or lack of hybridization in certain assays. Immunohistochemical (IHC) expression of fascin, both in its aggregated form and by category, showed no association with the TOP2A gene alteration ratio. Fascin expression was significantly associated with histological subtype (p < 0.001), molecular subtype (p < 0.001), hormone receptor (HR) (p < 0.001), BCL2 (p = 0.003), Ki67 (p = 0.002), and histological grade (p < 0.001). TOP2A was significantly associated with molecular subtype (p = 0.041), Ki67 (p = 0.048), and histological grade (p = 0.033). In our study, molecular subtype (p = 0.037) emerged as an independent variable for the complete histological response to neoadjuvant treatment. Multivariate analysis linked pathological stage (p = 0.002) and estrogen receptor (ER) expression (p = 0.004) to overall survival (OS) and disease-free survival (DFS). Conclusions: No statistical relationship was evident between fascin expression (IHC) and the TOP2A copy ratio. The results of this study suggested that the mechanisms of increased cell proliferation associated with alterations in fascin and TOP2A are independent. Full article

Wound infections pose a significant challenge in healthcare settings due to prolonged healing times and the emergence of antibiotic-resistant bacteria. Traditional wound dressings often fail to provide sustained drug release, optimal moisture retention, and effective antibacterial protection, leading to suboptimal therapeutic outcomes. This study aimed to optimize and develop neomycin-integrated hydrogels crosslinked via tannic acid (TA) for the treatment of infectious wounds. The hydrogels were optimized using a central composite experimental design. The amounts of polyvinyl alcohol (PVA, 10–20% w/w) and polyvinylpyrrolidone (PVP, 5–20% w/w) were varied and mixed with a fixed concentration of TA (1% w/w) as a crosslinker. The water content (%), water absorption (%), erosion (%), water vapor transmission rate (WVTR), and the mechanical properties of the hydrogels were evaluated. Neomycin was integrated in the optimized hydrogel, and the antibacterial activity against Staphylococcus aureus was studied using a time-kill analysis method. The optimal hydrogel formula contained PVA and PVP at a ratio of 20:19.89 by weight. The resulting hydrogel possessed good physical and mechanical properties and had a water content of 71.86%, water absorption of 124.96%, minimal erosion of 33.08%, and optimal WVTR of 5567 g/m²/24 h. Furthermore, the hydrogel showed desirable elasticity, with a Young’s modulus of 474.81 Pa and a tensile strength that could resist breakage upon application. The neomycin-integrated hydrogels inhibited bacterial growth comparably to the neomycin solution (0.5% w/v). Therefore, TA was proven to be a promising natural crosslinker and the optimized hydrogel was demonstrated to be a propitious platform for neomycin cutaneous application, and which could be used to treat infected wounds in the future. Full article

Background and Objectives: Traction alopecia is a common type of hair loss that primarily results from prolonged tension in hair follicles. This condition is often associated with certain hairstyles and hair care practices that are prevalent in various cultures, especially in Africa. There have been few studies on this issue in Africa, and none have been conducted in Sudan. Therefore, we aimed to examine the prevalence and associated factors of traction alopecia in women in north Sudan. Materials and Methods: A community-based, cross-sectional study was conducted in north Sudan in December 2022. Women’s sociodemographic characteristics were assessed using a questionnaire, and hair and scalp examinations were performed. A multivariate binary analysis was performed. Results: A total of 192 women participated in the study, and 48 (25.0%) had traction alopecia. The median age of the women was 42.0 years (interquartile range: 32.0–52.0 years). In a multivariate binary analysis, a family history of women with male pattern baldness or thinning (adjusted odds ratio [AOR] = 2.96, 95% confidence interval [CI] = 1.05–8.37) and the use of hair color or chemicals (AOR = 2.98, 95% CI = 1.30–6.83) were positively associated with traction alopecia. In contrast, increasing age was inversely associated with traction alopecia (AOR = 0.96, 95% CI = 0.93–0.99). The women with traction alopecia showed characteristics such as hair breakage, hair loss with the root attached, scalp tenderness, and trichodynia. Conclusions: In north Sudan, one in four women is affected by traction alopecia. Increasing awareness of this condition, providing education on proper hair care methods, and conducting large-scale research are essential steps to prevent its occurrence. Full article

Silk fibroin, known for its biocompatibility and biodegradability, holds significant promise for biomedical applications, particularly in drug delivery systems. The precise fabrication of silk fibroin particles, specifically those ranging from tens of nanometres to hundreds of microns, is critical for these uses. This study introduces elliptical vibration micro-turning as a method for producing silk fibroin particles in the form of cutting chips to serve as carriers for drug delivery systems. A hybrid finite element and smoothed particle hydrodynamics (FE-SPH) model was used to investigate how vibration parameters, such as frequency and amplitude, influence chip formation and morphology. This research is essential for determining the size and shape of silk fibroin particles, which are crucial for their effectiveness in drug delivery systems. The results demonstrate the superior capability of elliptical vibration micro-turning for producing shorter, spiral-shaped chips in the size range of tens of microns, in contrast to the long, continuous chips with zig-zag folds and segmented edges generated by conventional micro-turning. The unique zig-zag shapes result from the interplay between the high flexibility and hierarchical structure of silk fibroin and the controlled cutting environment provided by the diamond tool. Additionally, higher vibration frequencies and lower vertical amplitudes promote chip curling, facilitate breakage, and improve chip control, while reducing cutting forces. Experimental trials further validate the accuracy of the hybrid model. This study represents a significant advancement in the processing of silk fibroin film, offering a complementary approach to fabricating short, spiral-shaped silk fibroin particles with a high surface-area-to-volume ratio compared to traditional spheroids, which holds great potential for enhancing drug-loading efficiency in high-precision drug delivery systems. Full article

In the waterway construction projects of the upper reaches of the Yangtze River, crushed mudstone particles are widely used to backfill the foundations of rock-socketed concrete-filled steel tube (RSCFST) piles, a structure widely adopted in port constructions. In these projects, the steel–mudstone interfaces experience complex loading conditions, and the surface profile tends to vary within certain ranges during construction and operation. The changes in boundary conditions and material profile significantly impact the bearing performance of these piles when subjected to cyclic loads, such as ship impacts, water level fluctuations, and wave-induced loads. Therefore, it is necessary to investigate the shear characteristics of the RSCFST pile–soil interface under cyclic vertical loading, particularly in relation to varying deformation levels in the steel casing’s outer profile. In this study, a series of cyclic direct shear tests are carried out to investigate the influential mechanisms of roughness on the cyclic behavior of RSCFST pile–soil interfaces. The impacts of roughness on shear stress, shear stiffness, damping ratio, normal stress, and particle breakage ratio are discussed separately and can be summarized as follows: (1) During the initial phase of cyclic shearing, increased roughness correlates with higher interfacial shear strength and anisotropy, but also exacerbates interfacial particle breakage. Consequently, the sample undergoes more significant shear contraction, leading to reduced interfacial shear strength and anisotropy in the later stages. (2) The damping ratio of the rough interface exhibits an initial increase followed by a decrease, while the smooth interface demonstrates the exact opposite trend. The variation in damping ratio characteristics corresponds to the transition from soil–structure to soil–soil interfacial shearing. (3) Shear contraction is more pronounced in rough interface samples compared to the smooth interface, indicating that particle breakage has a greater impact on soil shear contraction compared to densification. Full article

The aim of this project is to fabricate fiber mats and hydrogel materials that constitute the two main components of a wound dressing material. The contributions of boric acid (BA) and zinc oxide (ZnO) to the physical and mechanical properties of polycaprolactone (PCL) is investigated. These materials are chosen for their antimicrobial and antifungal effects. Additionally, since chitosan forms brittle hydrogels, it is reinforced with polyvinyl alcohol (PVA) to improve ductility and water uptake properties. For these purposes, PCL, BA, ZnO, PVA, and chitosan are used in different ratios to fabricate nanofiber mats and hydrogels. Mechanical, physical, and chemical characteristics are examined. The highest elastic modulus and tensile strength are obtained from samples with 6% BA and 10% ZnO concentrations. ZnO-decorated fibers exhibit a higher elastic modulus than those with BA, though BA-containing fibers exhibit greater elongation before breakage. All fibers exhibit hydrophobic properties, which help to prevent biofilm formation. In compression tests, CS12 demonstrates the highest strength. Increasing the PVA content enhances ductility, while a higher concentration of chitosan results in a denser structure. This outcome is confirmed by FTIR and swelling tests. These findings highlight the optimal combinations of nanofibrous mats and hydrogels, offering guidance for future wound dressing designs that balance mechanical strength, water absorption, and antimicrobial properties. By stacking these nanofibrous mats and hydrogels in different orders, it is expected to achieve a wound care material that is suitable for various applications. The authors encourage experimentation with different configurations of these nanofiber and hydrogel stackings to observe their mechanical behavior under real-life conditions in future studies. Full article