Search Results (291)

In this study, a pH-responsive molecularly imprinted polymer (MIP) drug carrier was developed utilizing boric acid-functionalized mesoporous silica nanoparticles (MSNs) as the substrate. The carrier was engineered for controlled drug release, with capecitabine (CAPE) being selected as the template molecule due to its structural characteristics and clinical relevance. In vitro drug release studies demonstrated the pH-responsive release behaviors of the fabricated carrier, highlighting its promising applicability in the controlled release of pharmaceutical compounds containing cis-diols, particularly for site-specific therapy where pH variations serve as physiological triggers. Full article

This paper reviews the fundamental principles and techniques of nickel electrodeposition, with a particular focus on metallizing polymeric substrates. It outlines the electrochemical mechanisms involved in depositing nickel from an acidic Watts bath, detailing the roles of key electrolyte components—i.e., nickel sulfate, nickel chloride, and boric acid—and the influence of process parameters, such as current density, temperature, and pH, on deposit quality (density and surface condition) and mechanical properties. In addressing the unique challenges posed by non-conductive polymers, this review compares emerging methods like silver conductive paint, highlighting differences in deposition time, surface resistivity, and environmental impact. Additionally, this paper examines how process parameters affect the as-deposited microstructure, adhesion, and overall mechanical properties (such as hardness, ductility, and tensile strength), while identifying critical issues such as low deposition density and substrate degradation. These insights provide a structured background for optimizing electroplating processes for applications in electronics, automotive, aerospace, and biomedical sectors, and suggest future research directions to enhance deposition uniformity, sustainability, and process control. Full article

Silica fume-based geopolymer composite coatings, an approach to using metallurgical solid waste, exert flame retardancy with ecological, halogen-free, and environmentally friendly advantages, but their fire resistance needs to be improved further. Herein, a silica fume-based geopolymer composite flame-retardant coating was designed by doping boric acid (BA), zinc phytate (ZnPA), and melamine (MEL). The results of a cone calorimeter demonstrated that appropriate ZnPA and BA significantly enhanced its flame retardancy, evidenced by the peak heat release rate (p-HRR) decreasing from 268.78 to 118.72 kW·m⁻², the fire performance index (FPI) increasing from 0.59 to 2.83 s·m²·kW⁻¹, and the flame retardancy index increasing from 1.00 to 8.48, respectively. Meanwhile, the in situ-formed boron phosphate (BPO₄) facilitated the residual resilience of the fire-barrier layer. Furthermore, the pyrolysis kinetics indicated that the three-level chemical reactions governed the pyrolysis of the coatings. BPO₄ made the pyrolysis E_α climb from 94.28 (P5) to 127.08 (B3) kJ·mol⁻¹ with temperatures of 731–940 °C, corresponding to improved thermal stability. Consequently, this study explored the synergistic flame-retardant mechanism of silica fume-based geopolymer coatings doped with ZnPA, BA, and MEL, providing an efficient strategy for the high-value-added recycling utilization of silica fume. Full article

This study presents the development and comprehensive characterization of biopolymer-based nanofibrous composites composed of polyvinyl alcohol (PVA), chitosan (CS), boric acid (BA), and a natural antifungal agent natamycin (NAT), designed for therapeutic applications. A dual-layer 3D-fiber composite (PVA/CS/BA_PVA/NAT) was successfully fabricated using a layer-by-layer 3D bioprinting technique and electro-spinning, integrating BA into the core matrix and NAT into the outer layer. Mechanical tests revealed a significantly improved elastic modulus of 763.04 ± 14.54 MPa and the highest ultimate tensile stress (50.45 ± 2.58 MPa) among all samples. Despite a moderate strain at break (11.77 ± 0.49%), the composite preserved sufficient elasticity suitable for biological interfaces. Morphological assessment via SEM confirmed the successful deposition of continuous and bead-free nanofibers, with controlled fiber alignment and reduced average fiber diameters, especially in the BA-incorporated structure. The dual-layered system displayed enhanced uniformity and structural coherence. The drug release analysis demonstrated sustained NAT delivery over a 90 min period. Kinetic modeling showed a high correlation with the Korsmeyer–Peppas model (R² > 0.99), suggesting diffusion-controlled release, supported by the Korsmeyer–Peppas model’s Fickian diffusion exponent. In contrast, zero- and first-order models exhibited weaker fits, underscoring the relevance of a matrix-based release mechanism governed by the layered configuration. Crucially, antifungal assays against Candida albicans revealed substantial bioactivity. The PVA/CS/BA_PVA/NAT formulation achieved the largest inhibition zone (1.64 ± 0.13 cm), significantly outperforming single-layer controls such as PVA/CS/BA (1.25 ± 0.08 cm) and PVA/CS_PVA/NAT (1.43 ± 0.08 cm), while neat PVA exhibited no inhibition. These results confirm the synergistic antifungal efficacy of BA and NAT within the dual-layer structure. Together, these findings highlight the potential of the 3D-printed PVA/CS/BA_PVA/NAT composite as a mechanically robust, morphologically optimized, and bioactive platform for antifungal therapy and wound-healing applications. Full article

Albi-boric argosols, mainly distributed in the Sanjiang Plain of Heilongjiang Province, China, accounting for over 80% of the total cultivated land area, is characterized by a nutrient-deficient layer beneath black soil. This study addresses the challenges of modern agriculture by investigating the impact of straw incorporation on soil dissolved organic carbon (DOC) and its structures in albi-boric argosols, profiles, using fluorescence excitation–emission spectroscopy and parallel factor analysis (PARAFAC). Three treatments were applied: undisturbed albi-boric argosols (C), mixed albic and illuvium layers (M), and mixed albic and illuvium layers with straw (MS). Results showed that the yield of M and MS increased by 9.9% and 13.0%, respectively. There was a significant increase in DOC content, particularly in the MS treatment. Fluorescence index (FI) values ranged from 1.65 to 1.86, biological index (BIX) values were less than 1, and humification index (HIX) values were below 0.75, indicating a mix of plant and microbial sources for DOC, autochthonous characteristics, and weaker humification degree. PARAFAC identified two/three individual fluorophore moieties that were attributed to fulvic acid substances, soluble microbial products, and tyrosine-like substances, with microbial products as the dominant component. This study demonstrates the effect of improving barrier soil and maintaining sustainable agriculture by enhancing soil quality. Full article

Lichen-specific natural products exhibit a wide range of biological activities, which makes them potentially useful in the pharmaceutical, cosmetic, and nutritional industries. In the present study, a capillary electrophoresis method was developed and optimized for the separation of seven major metabolites, physodic acid, 3-hydroxyphysodic acid, atranorin, physodalic acid, chloroatranorin, salazinic acid, and protocetraric acid, found in Hypogymnia physodes. The optimization was performed using a design of experiments approach, focusing on four critical parameters: boric acid concentration, deoxycholic acid concentration, methanol content, and buffer pH. The overall separation efficiency was used as the response factor for optimization. The optimal separation conditions were achieved using a buffer composed of 60 mM boric acid, 70 mM deoxycholic acid, and 14% methanol at pH 9.6. The validated method was subsequently applied for the chemophenetic analysis of 28 lichen species belonging to the families Cladoniaceae, Parmeliaceae, Physciaceae, Ramalinaceae, and Teloschistaceae. In addition to the above-mentioned lichen compounds, the lichens examined showed the presence of evernic acid, usnic acid, and physicon. The developed CE method offers a reliable and efficient tool for the characterization of lichen metabolites, with potential applications in both botany and natural product research. Full article

We demonstrate a rapid and sensitive boron detection method through current amplification mediated by supramolecular interaction. Oxidation peak currents obtained by cyclic voltammetry (CV) measurements of a ferrocene/catechol-functionalized β-cyclodextrin inclusion complex were amplified through an EC’ reaction (where EC’ denotes an electrochemical step followed by a catalytic chemical step). However, the amplified current was decreased by boric acid (the primary form of boron in water) addition at pH 8.6 owing to interactions of boron with the cis-diol structure of dihydroxybenzoic acid-β-cyclodextrin and ferrocene for ester formation. We determined the optimum CyD functionalization sites and measurement conditions and obtained a limit of detection of 0.16 mg B L⁻¹ for ferrocene/3,4-dihydroxybenzoic acid-β-cyclodextrin (Fc/3,4-DHBA-β-CyD). The binding constant (assuming a 1:1 binding model) for the interaction between Fc/3,4-DHBA-β-CyD and boric acid was estimated to be approximately 1500 M⁻¹. Boron concentrations in spiked real samples showed good recoveries and linear calibration curves. The electrochemical response of this system was not significantly affected by the presence of other anions or cations. We also found that an aqueous solution of 3,4-DHBA-β-CyD remained stable for at least 112 days. Full article

Medium-entropy alloys (MEAs) exhibit properties comparable or even superior to high-entropy alloys (HEAs). Due to their very good resistance in thermomechanical conditions and corrosive environments and unique electrical and magnetic properties, medium-entropy alloys are good candidates for coating applications. One of the most economically effective methods of producing metallic coatings is electrodeposition. In this work, the structure of an electrodeposited CoFeNi medium-entropy alloy coating on a copper substrate from a metal chlorides solution (FeCl₂ ∙ 4H₂O + CoCl₂ ∙ 6H₂O + NiCl₂ ∙ 6H₂O) with the addition of boric acid (H₃BO₃) was investigated. The coating was characterized by a nanocrystalline structure identified by transmission electron microscopy examination and X-ray diffraction methods. Based on XRD and TEM, the face-centered cubic (FCC) phase of the CoFeNi MEA coating was identified. The high corrosion resistance of the MEA coating in a 3.5% NaCl environment at 25 °C was confirmed by electrochemical tests. Full article

Bismuth is a promising and environmentally safe metal widely used in various industries, including electronics, medicine and metallurgy. Despite this, its production is associated with a number of technological difficulties due to the low content of bismuth in natural ores and its presence mainly as a by-product of lead processing. The present article is devoted to the study of the method of increasing the content of bismuth in lead alloys using oxygen oxidation. It is shown that lead, which has a high affinity for oxygen, is effectively oxidized and passes into the slag phase, whereas bismuth is concentrated in the metallic phase. Experiments were carried out at 650 °C using boric acid to lower the melting point of the slag and improve its flowability. As a result of five enrichment steps, the bismuth content in the alloy increased from 4.0% to 48.8%. The proposed method demonstrates high selectivity and economic efficiency, which makes it promising for industrial application. The results of the study can be used to develop more environmentally safe and energy-efficient technologies for bismuth lead enrichment, which is especially relevant in the context of growing demand for bismuth in various industries. Full article

Scallions are a highly valued leafy vegetable and are enjoyed worldwide due to their appealing taste and nutritional benefits. A combination of short cultivation cycles and high market demand not only enhances food security but also offers a profitable opportunity for growers. In our study, we aim to evaluate the effect of increasing boron (B) applications, specifically 0, 0.2, 0.4, 0.8, 1.2, and 1.6 mM B supplied as boric acid (H₃BO₃) in the nutrient solution, on several key physiological and agronomic parameters in scallions. Results showed that the effects of increasing B levels on biomass production were insignificant, but the root fresh weight (FW) significantly decreased with all B levels. Higher B levels (1.2 and 1.6 mM) caused decreases of 22.9% and 29.6%, respectively. The effects of all B levels on photosynthetic pigment contents [chlorophyll (Chl) a, b, a + b, and carotenoid (Car)], root and shoot membrane permeability (MP), and root, shoot, and leaf nutritional status [phosphorus (P), potassium (K), calcium (Ca), and sodium (Na) concentrations] were found insignificantly. However, all B levels caused a significant increase in the B concentrations of the root, shoot, and leaf of scallions and plants translocated the majority of applied B into their leaves. The translocation factor (TF) of B from the root to the leaf was found to be 138.2%, 133.3%, and 107.3% with 0.8, 1.2, and 1.6 mM B levels, respectively. Moreover, plants exposed to high levels of B showed no significant response or toxicity symptoms. We concluded that B is a phloem mobile element in onion, a non-graminaceous monocotyledonous plant, and therefore accumulates in the upper organs but illustrates partial toxicity symptoms in leaves. Studies with higher B concentrations could be recommended to determine critical B levels for green onion production in B-contaminated areas. Full article

The increasing concentration of carbon dioxide (CO₂) in the atmosphere necessitates the development of efficient carbon capture and storage (CCS) technologies. Among these, adsorption-based methods using porous carbon (PC) have attracted considerable attention due to their low energy requirements and cost-effectiveness. Biomass waste-derived porous carbon is particularly attractive as a sustainable alternative, offering environmental benefits and high-value applications with low costs. In this study, coffee grounds (CGs) were selected as a precursor due to their abundance and cost-effectiveness compared with other biomass wastes. To improve the pore characteristics of CG-derived carbon (CCG), boric acid treatment was applied during carbonization followed by steam activation to prepare boron-doped CG-derived porous carbon (B-PCG). The N₂/77K adsorption–desorption isotherms revealed a significant increase in the specific surface area and total pore volume of B-PCG from 1590 m²/g and 0.71 cm³/g to 2060 m²/g and 1.01 cm³/g, respectively, compared with PCG. Furthermore, high pressure CO₂ adsorption analysis at 298 K up to 50 bar showed an approximately 50% improvement in CO₂ adsorption capacity for B-PCG compared with PCG. These results suggest that boron doping is an effective strategy to optimize the pore structure and adsorption performance of biomass-derived porous carbon materials for CCS application. Full article

This study seeks to develop and implement a non-enzymatic fluorescent labeling for immunoassay and immunochromatographic assay (ICAs) targeting SARS-CoV-2, to meet the extensive interest and need for effective COVID-19 diagnosis. In this manuscript, we delineate the development, synthesis, and evaluation of a novel quinone polymer zinc hybrid nanoarchitecture, referred to as polymerized alizarin red–inorganic hybrid nanoarchitecture (PARIHN), which integrates an antibody for direct use in fluorescent immunoassays, offering enhanced sensitivity, reduced costs, and improved environmental sustainability. The designed nanoarchitecture can enhance the sensitivity of the immunoassay and enable rapid results without the complexities associated with enzymes, such as their low stability and high cost. At first, a chitosan–alizarin polymer was synthesized utilizing quinone–chitosan conjugation chemistry (QCCC). Then, the chitosan–alizarin polymer was embedded with the detection antibody using zinc ion, forming PARIHN, which was proven to be a stable label with the ability to enhance the assay stability and sensitivity of the immunoassay. PARIHN can react with phenylboronic acid (PBA) or boric acid through its alizarin content to produce fluorescence signals with an LOD of 15.9 and 2.6 pm for PBA and boric acid, respectively, which is the first use of a boric acid derivative in signal generation in the immunoassay. Furthermore, PARIHN demonstrated high practicality in detecting SARS-CoV-2 nucleoprotein in fluorescence (PBA and boric acid) systems with an LOD of 0.76 and 10.85 pm, respectively. Furthermore, owing to the high brightness of our PARIHN fluorogenic reaction, our labeling approach was extended to immunochromatographic assays for SARS-CoV-2 with high sensitivity down to 9.45 pg/mL. Full article

The galvanostatic electrodeposition of cobalt–nickel alloy coatings performed out on a 304 stainless steel substrate. The electrolyte baths contained metals salts, along with boric acid and sodium benzene sulfonate (SBS) as an organic additive in the deposition process. Structural and topographic analyses were performed using SEM-EDS and AFM techniques, respectively. The findings confirm the formation of nanostructured coatings. The images depicting various stages of coating formation indicated the inhibitory role of the organic additive. The presence of SBS enabled the formation of a coating composed of grains with diverse geometries and significantly reduced surface roughness. Hydrogen evolution was conducted in an alkaline environment (1 M NaOH). Overpotentials for the different structures were recorded at 10 mA/cm², yielding 196 mV and 225 mV for the coatings deposited with and without SBS, respectively. Additionally, experiments were performed in a laboratory-designed electrolyzer, which allowed for the measurement of gas volumes (H₂ and O₂) generated under constant voltage and current conditions. The results demonstrated that the obtained coatings perform more effectively as hydrogen evolution cathodes than currently used materials, particularly under higher current densities. Electrolysis was conducted for 8 h, revealing improved stability of the coating deposited in the presence of SBS. Full article

Phenolic aerogel is one of the most widely used lightweight thermal protective materials at present. With changes in the application environments, higher requirements are put forward for the heat resistance and mechanical properties of phenolic aerogel. In this paper, boric acid was used to modify phenolic resin, and then boron-modified phenolic aerogel was prepared. The chemical structure of modified phenolic resin was studied by infrared spectroscopy (FTIR). The microstructure, thermal stability, heat resistance in air, and compression resistance of phenolic aerogel were studied by volume shrinkage, scanning electron microscope, thermogravimetric analysis, high-temperature combustion test, and mechanical test. The results showed that the modification introduced boron oxygen bonds on the phenolic main chain. The compatibility difference between boron and phenolic resin with different content has a significant impact on the performance of phenolic aerogel. When boron content is 5–10% of phenolic resin, the network structure and thermal stability of phenolic aerogel can be significantly improved, and the maximum compressive strength of phenolic aerogel can also be improved. Boron-modified phenolic aerogel is expected to play an important role in the field of thermal insulation. Full article

This study investigates innovative surface coatings’ effectiveness in enhancing spruce wood’s fire resistance (Picea abies spp.). Spruce wood samples were treated with various agents, including oils, waxes, boric acid, commercial coatings, and fire-retardant agents. The evaluation was conducted using the small flame method (EN ISO 11925-2:2020), surface roughness analysis, hyperspectral imaging (HSI), and contact angle measurements. The results demonstrated significant improvements in fire resistance for samples treated with specific coatings, particularly the Burn Block spray and Caparol coating, which effectively prevented flame spread. The analysis revealed that the Burn Block spray reduced the average flame height to 6.57 cm, while the Caparol coating achieved a similar effect with an average flame height of 6.95 cm. In contrast, untreated samples exhibited a flame height of 9.34 cm, with boric acid-treated samples reaching up to 12.18 cm. Char depth measurements and the surface roughness analysis revealed a clear correlation between the type of treatment and the thermal stability of the wood. Hyperspectral imaging enabled a detailed visualisation of surface degradation, while contact angle measurements highlighted the impact of hydrophobicity on flammability. This research provides in-depth insights into the fire-retardant mechanisms of spruce wood and offers practical guidelines for developing safer and more sustainable wood materials for the construction industry. Full article