Search Results (11)

Bent-shaped liquid crystal (LC) dimers, trimers, and oligomers are intriguing because of their unique liquid crystallinities, which have gained further impetus after the identification of the twist-bend nematic (N_TB) phase in these molecules. LC trimers exhibiting the N_TB phase still remain relatively rare compared to the predominant LC dimers. We report the first homologs of selenium-linked LC trimers, 4,4′-bis[ω-(4-cyanobiphenyl-4′-ylseleno)alkoxy]biphenyls (CBSenOBOnSeCB) with carbon numbers in the alkyl-chain spacers, n = 7 or 9). Polarizing optical microscopy, differential scanning calorimetry, and X-ray diffraction (XRD) measurements were performed to investigate the phase transition behavior and mesophase structures of the trimers. Both CBSenOBOnSeCB trimers exhibited nematic (N) and N_TB phases. The XRD measurements revealed the presence of smectic A-like cybotactic clusters with a triply intercalated structure in the N and N_TB phases. The LC phase transition temperatures of CBSenOBOnSeCB were lower than those of the already-known ether-linked CBOnOBOnOCB and thioether-linked CBSnOBOnSCB counterparts. This trend is ascribed to the enhanced molecular bending and molecular flexibility of CBSenOBOnSeCB, which are caused by the smaller bond angle and greater bond flexibility of C–Se–C compared to C–O–C and C–S–C. This study offers a new molecular design for multiply linked LC oligomers with heavier chalcogen atoms. Full article

This study presents a novel strategy for designing photocurable resins tailored for the additive manufacturing of smart thermoset materials. A quaternary formulation was developed by integrating bis(2-methacryloyl)oxyethyl disulfide (DADS) with an epoxy/thiol-ene system (ETES) composed of diglycidyl ether of bisphenol A (EP), pentaerythritol tetrakis(3-mercaptopropionate) (PTMP), and 4,4′-methylenebis(N,N-diallylaniline) (ACA4). This unique combination enables the simultaneous activation of four polymerization mechanisms: radical photopolymerization, thiol-ene coupling, thiol-Michael addition, and anionic ring-opening, within a single resin matrix. A key innovation lies in the exothermic nature of DADS photopolymerization, which initiates and sustains ETES curing at room temperature, enabling 3D printing without thermal assistance. This represents a significant advancement over conventional systems that require elevated temperatures or post-curing steps. The resulting hybrid poly(acrylate–co-ether–co-thioether) network exhibits enhanced mechanical integrity, shape memory behavior, and intrinsic self-healing capabilities. Dynamic Mechanical Analysis revealed a shape fixity and recovery of 93%, while self-healing tests demonstrated a 94% recovery of viscoelastic properties, as evidenced by near-overlapping storage modulus curves compared to a reference sample. This integrated approach broadens the design space for multifunctional photopolymers and establishes a versatile platform for advanced applications in soft robotics, biomedical devices, and sustainable manufacturing. Full article

The interaction of propane-1,3-dithiol with the chiral bis-thioether, which combines two 2(5H)-furanone moieties, bridged through their carbon atoms C(4) by the propane-1,3-dithiol fragment, in DMF in the presence of potassium hydroxide or cesium carbonate resulted in the formation of an optically active fused bicyclic sulfur heterocycle, possessing 1,4-dithiepine and unsaturated γ-lactone moieties. The studied reaction follows an unexpected pathway in a basic medium with the thiolate–thiolate exchange. The structure of the novel heterocycle of the 1,4-dithiepinofuranone series is characterized by single-crystal X-ray diffraction. Full article

With the aim to develop novel scaffolds for the sustained release of drugs, we initially developed an easy approach for the synthesis of α,ω-homobifunctional mercaptoacyl poly(alkyl oxide)s. This was based on the esterification of the terminal hydroxyl groups of poly(alkyl oxide)s with suitably S-4-methoxytrityl (Mmt)-protected mercapto acids, followed by the removal of the acid labile S-Mmt group. This method allowed for the efficient synthesis of the title compounds in high yield and purity, which were further used in the development of a thioether cross-linked liposome scaffold, by thia–Michael reaction of the terminal thiol groups with pre-formed nano-sized liposomes bearing maleimide groups on their surface. The reaction process was followed by ¹H-NMR, using a Carr–Purcell–Meiboom–Gill (CPMG) relaxation dispersion NMR experiment (¹H-NMR CPMG), which allowed for real-time monitoring and optimization of the reaction process. The thioether cross-linked liposomal scaffold that was synthesized was proven to preserve the nano-sized characteristics of the initial liposomes and allowed for the sustained release of calcein (which was used as a hydrophilic dye and a hydrophilic drug model), providing evidence for the efficient synthesis of a novel drug release scaffold consisting of nanoliposome building blocks. Full article

This article presents the synthesis and molecular dynamics investigation of three novel cyclic thioethers: 2,3-(4′-methylbenzo)-1,4,7,10-tetrathiacyclododeca-2-ene (compound 1), 2,3,14,15-bis(4′,4″(5″)-methylbenzo)-1,4,7,10,13,16,19,22,25-octathiacyclotetracosa-2,14-diene (compound 2), and 2,3,8,9-bis(4′,4″(5″)-methylbenzo)-1,4,7,10-tetrathiacyclododeca-2,8-diene (compound 3). The compounds exhibit relatively high glass transition temperatures (T_g), which range between 254 and 283 K. This characteristic positions them within the so-far limited category of crown-like glass-formers. We demonstrate that cyclic thioethers may span both the realms of ordinary and sizeable molecular glass-formers, each featuring distinct physical properties. Furthermore, we show that the T_g follows a sublinear power law as a function of the molar mass within this class of compounds. We also reveal multiple dielectric relaxation processes of the novel cyclic thioethers. Above the T_g, their dielectric loss spectra are dominated by a structural relaxation, which originates from the cooperative reorientation of entire molecules and exhibits an excess wing on its high-frequency slope. This feature has been attributed to the Johari–Goldstein (JG) process. Each investigated compound exhibits also at least one intramolecular secondary non-JG relaxation stemming from conformational changes. Their activation energies range from approximately 19 kJ/mol to roughly 40 kJ/mol. Finally, we analyze the high-pressure molecular dynamics of compound 1, revealing a pressure-induced increase in its T_g with a dT_g/dp coefficient equal to 197 ± 8 K/GPa. Full article

We report the synthesis, phase-transition behavior, and mesophase structures of the first homologous series of thioether-linked liquid crystal (LC) trimers, 4,4′-bis[ω-(4-cyanobiphenyl-4′-ylthio)alkoxy]biphenyls (CBSnOBOnSCB with a wide range of spacer carbon numbers, n = 3–11). All CBSnOBOnSCB homologs exhibited LC phases. Interestingly, even-n and odd-n homologs showed monotropic layered smectic A (SmA) and pseudo-layered twist-bend nematic (N_TB) phases, respectively, below a nematic (N) phase. This alternate formation, which depends on spacer chain parity, is attributed to different average molecular shapes, which are associated with the relative orientations of the biphenyl moieties: linear and bent shapes for even-n and odd-n homologs, respectively. In addition, X-ray diffraction analysis indicated a strong cybotactic N phase tendency, with a triply intercalated structure. The phase-transition behavior and LC phase structures of thioether-linked CBSnOBOnSCB were compared with those of the all-ether-linked classic LC trimers CBOnOBOnOCB. Overall, thioether linkages endowed CBSnOBOnSCB with a monotropic LC tendency and lowered phase-transition temperatures, compared to those of CBOnOBOnOCB, for the same n. This is attributed to enhanced flexibility and bending (less molecular anisotropy) of the molecules, caused by the greater bond flexibility and smaller inner bond angles of the C–S–C bonds, compared to those of the C–O–C bonds. Full article

Sulfur-containing groups preorganized on macrocyclic scaffolds are well suited for liquid-phase complexation of soft metal ions; however, their binding potential was not extensively studied at the air–water interface, and the effect of thioether topology on metal ion binding mechanisms under various conditions was not considered. Herein, we report the interface receptor characteristics of topologically varied thiacalixarene thioethers (linear bis-(methylthio)ethoxy derivative L², O₂S₂-thiacrown-ether L³, and O₂S₂-bridged thiacalixtube L⁴). The study was conducted in bulk liquid phase and Langmuir monolayers. For all compounds, the highest liquid-phase extraction selectivity was revealed for Ag⁺ and Hg²⁺ ions vs. other soft metal ions. In thioether L² and thiacalixtube L⁴, metal ion binding was evidenced by a blue shift of the band at 303 nm (for Ag⁺ species) and the appearance of ligand-to-metal charge transfer bands at 330–340 nm (for Hg²⁺ species). Theoretical calculations for thioether L² and its Ag and Hg complexes are consistent with experimental data of UV/Vis, nuclear magnetic resonance (NMR) spectroscopy, and single-crystal X-ray diffractometry of Ag–thioether L² complexes and Hg–thiacalixtube L⁴ complex for the case of coordination around the metal center involving two alkyl sulfide groups (Hg²⁺) or sulfur atoms on the lower rim and bridging unit (Ag⁺). In thiacrown L³, Ag and Hg binding by alkyl sulfide groups was suggested from changes in NMR spectra upon the addition of corresponding salts. In spite of the low ability of the thioethers to form stable Langmuir monolayers on deionized water, one might argue that the monolayers significantly expand in the presence of Hg salts in the water subphase. Hg²⁺ ion uptake by the Langmuir–Blodgett (LB) films of ligand L³ was proved by X-ray photoelectron spectroscopy (XPS). Together, these results demonstrate the potential of sulfide groups on the calixarene platform as receptor unit towards Hg²⁺ ions, which could be useful in the development of Hg²⁺-selective water purification systems or thin-film sensor devices. Full article

Patulin, a mycotoxin, is known to have cytotoxic effects, but few studies have focused on the involvement of the endoplasmic reticulum (ER) stress response in patulin toxicity and the natural compounds that attenuate it in HepG2 cells. This study tested the ability of patulin to induce ER stress, and that of four thiols and three thioethers to attenuate patulin-induced ER stress in HepG2 cells. Patulin dose-dependently inhibited cell proliferation (IC₅₀, 8.43 μM). Additionally, patulin was found to increase the expression levels of ER stress-related genes and/or protein markers, including BiP, CHOP, and spliced XBP1, in HepG2 cells compared to the vehicle control, indicating its potential in ER stress induction. Patulin-induced cytotoxicity in HepG2 cells was reduced by naturally occurring thiol compounds (glutathione, L-acetyl-L-cysteine, cysteine, and captopril), but not by thioether compounds (sulforaphane, sulforaphene, and S-allyl-L-cysteine). Patulin-thiol co-treatment decreased CHOP expression and BiP and CHOP levels in HepG2 cells but did not alter BiP expression. Spliced XBP1 expression was decreased by patulin-thiol co-treatment. Thus, patulin induced ER stress in HepG2 cells and thiols, but not in thioethers, attenuated patulin-induced ER stress. Full article

The valorisation of biomass-derived platform chemicals via catalytic hydrogenation is an eco-friendly tool which allows us to recover bio-based building blocks and produce fine chemicals with high industrial appeal. In the present study, a novel surfactant-type triazolyl-thioether ligand was prepared, showing excellent catalytic activity in the presence of bis(1,5-cyclooctadiene)diiridium(I) dichloride [Ir(COD)Cl]₂ for the hydrogenation of furfural, cinnamaldehyde, levulinic acid, 5-hydroxymethylfurfural, vanillin, and citral. Easy recovery by liquid/liquid extraction allowed us to recover the catalyst, which could then be efficiently recycled up to 11 times for the hydrogenation of furfural. In-depth analysis revealed the formation of spherical structures with metal nanoparticles as big as 2–6 nm surrounded by the anionic ligand, preventing iridium nanoparticle degradation. Full article

Silver(I)-based coordination polymers or metal-organic frameworks (MOFs) display useful antibacterial properties, whereby distinct materials with different bonding can afford control over the release of silver(I) ions. Such silver(I) materials are comprised of discrete secondary building units (SBUs), and typically formed with ligands possessing only soft or borderline donors. We postulated that a linker with four potential donor groups, comprising carboxylate and soft thioether donors, 2,5-bis (allylsulfanyl) benzene dicarboxylic acid (ASBDC), could be used to form stable, highly connected coordination polymers with silver(I). Here, we describe the synthesis of a new material, (Ag₂(ASBDC)), which possesses a rod-like metal node-based 3D honeycomb structure, strongly π-stacked linkers, and steric bulk to protect the node. Due to the rod-like metal node and the blocking afforded by the ordered allyl groups, the material displays notable thermal and moisture stability. An interesting structural feature of (Ag₂(ASBDC)) is contiguous Ag–S bonding, essentially a helical silver chalcogenide wire, which extends through the structure. These interesting structural features, coupled with the relative ease by which MOFs made with linear dicarboxylate linkers can be reticulated, suggests this may be a structure type worthy of further investigation. Full article

New group 11 metal complexes have been prepared using the previously described tripodal bis(imidazole) thioether ligand (N-methyl-4,5-diphenyl-2-imidazolyl)₂C(OMe)C(CH₃)₂S(tert-Bu) ({BIT^OMe,StBu}, 2). The pincer ligand offers a N₂S donor atom set that can be used to coordinate the group 11 metals in different oxidation states [Au^I, Au^III, Ag^I, Cu^I and Cu^II]. Thus the new compounds [Au{BIT^OMe,StBu}Cl][AuCl₄]₂ (3), [Au{BIT^OMe,StBu}Cl] (4), [Ag{BIT^OMe,StBu}X] (X = OSO₂CF₃^- 5, PF₆^- 6) and [Cu{BIT^OMe,StBu}Cl₂] (7) have been synthesized from reaction of 2 with the appropriate metal precursors, and characterized in solution. While attempting characterization in the solid state of 3, single crystals of the neutral dinuclear mixed Au^III-Au^I species [Au₂{BIT^OMe,S}Cl₃] (8) were obtained and its crystal structure was determined by X-ray diffraction studies. The structure shows a Au^III center coordinated to the pincer ligand through one N and the S atom. The soft Au^I center coordinates to the ligand through the same S atom that has lost the tert-butyl group, thus becoming a thiolate ligand. The short distance between the Au^I-Au^III atoms (3.383 Å) may indicate a weak metal-metal interaction. Complexes 2-7 and the previously described Cu^I compound [Cu{BIT^OMe,StBu}]PF₆ (9) have been evaluated in the oxidation of biphenyl ethylene with tert-butyl hydrogen peroxide (TBHP) as the oxidant. Results have shown that the Au^I and Ag^I complexes 4 and 6 (at 10 mol % loading) are the more active catalysts in this oxidative cleavage. The antimicrobial activity of compounds 2-5, 7 and 9 against Gram-positive and Gram-negative bacteria and yeast has also been evaluated. The new gold and silver compounds display moderate to high antibacterial activity, while the copper derivatives are mostly inactive. The gold and silver complexes were also potent against fungi. Their cytotoxic properties have been analyzed in vitro utilizing HeLa human cervical carcinoma cells. The compounds displayed a very low cytotoxicity on this cell line (5 to 10 times lower than cisplatin) and on normal primary cells derived from C57B6 mouse muscle explants, which may make them promising candidates as potential antimicrobial agents and safer catalysts due to low toxicity in human and other mammalian tissues. Full article