Search Results (8)

Acne is a common skin condition caused by the growth of certain bacteria. Many plant extracts have been investigated for their potential to combat acne-inducing microbes, and one such plant extract is microwave-assisted Opuntia humifusa extract (MA-OHE). The MA-OHE was loaded onto zinc-aminoclay (ZnAC) and encapsulated in a Pickering emulsion system (MA-OHE/ZnAC PE) to evaluate its therapeutic potential against acne-inducing microbes. Dynamic light scattering and scanning electron microscopy were used to characterize MA-OHE/ZnAC PE with a mean particle diameter of 353.97 nm and a PDI of 0.629. The antimicrobial effect of MA-OHE/ZnAC was evaluated against Staphylococcus aureus (S. aureus) and Cutibacterium acnes (C. acnes), which contribute to acne inflammation. The antibacterial activity of MA-OHE/ZnAC was 0.1 and 0.025 mg/mL to S. aureus and C. acnes, respectively, which were close to naturally derived antibiotics. Additionally, the cytotoxicity of MA-OHE, ZnAC, and MA-OHE/ZnAC was tested, and the results showed that they had no cytotoxic effects on cultured human keratinocytes in a range of 10–100 μg/mL. Thus, MA-OHE/ZnAC is suggested to be a promising antimicrobial agent for treating acne-inducing microbes, while MA-OHE/ZnAC PE is a potentially advantageous dermal delivery system. Full article

Although 3-aminopropyl functionalized magnesium phyllosilicate nanoparticles (hereafter aminoclay nanoparticles, ACNs) are well-known nanomaterials employed as drug carriers, their effects on immune cells remain unclear. To address this issue, we explored murine dendritic cells (DCs) as these cells belong to the innate arm of the immune system and function as antigen-presenting cells to elicit adaptive immune responses. We examined the in vitro effects of ACNs on DCs isolated from B6 mice. ACN treatment significantly down-regulated the expression of inflammasome-related markers, including NLRP3, caspase-1, and IL1β. The ACNs-induced anti-inflammatory DC phenotype was further confirmed by down-regulation of the AKT/mTOR/HIF1α signaling pathway. Such anti-inflammatory effects of ACNs on DCs occurred independently of DC subtypes. To document the effects of ACNs on DCs more clearly, we examined their anti-inflammatory effects on lipopolysaccharide (LPS)-activated DCs. As expected, excessive inflammatory responses (increased mitochondrial ROS and Th1-type cytokines such as IL12 and IL1β) of LPS-activated DCs were dramatically attenuated by ACN treatment. Furthermore, ACNs down-regulated IFNγ production by antigen-specific CD4⁺ T cells, which is consistent with a reduced inflammatory phenotype of DCs. Overall, our results provide support for employing ACNs as drug delivery materials with therapeutic potential to control inflammatory disorders. Full article

This study was conducted to develop a lipid/clay-based solid dispersion (LSD) formulation to enhance the dissolution and oral bioavailability of poorly soluble curcumin. Krill oil and aminoclay were used as a lipid and a stabilizer, respectively, and LSD formulations of curcumin were prepared by an antisolvent precipitation method combined with freeze-drying process. Based on the dissolution profiles, the optimal composition of LSD was determined at the weight ratio of curcumin: krill oil: aminoclay of 1:5:5 in the presence of 0.5% of D-α-tocopherol polyethylene glycol succinate. The structural and morphological characteristics of the LSD formulation were determined using X-ray powder diffraction, differential scanning calorimetry, and scanning electron microscopy. Crystalline curcumin was changed to an amorphous form in the LSD formulation. At the pH of acidic to neutral, the LSD formulation showed almost complete drug dissolution (>90%) within 1 h, while pure curcumin exhibited minimal dissolution of less than 10%. Furthermore, the LSD formulation had significantly improved oral absorption of curcumin in rats, where C_max and AUC of curcumin were 13- and 23-fold higher for the LSD formulation than for the pure drug. Taken together, these findings suggest that the krill oil-based solid dispersion formulation of curcumin effectively improves the dissolution and oral bioavailability of curcumin. Full article

Light-activated nanozymes possess several advantages, such as light-mediated activity regulation, utilization of molecular oxygen as a green oxidant, and highly enhanced activity; however, the types of light-activated nanozymes are still limited. In this study, we found that Mg aminoclay-based Fe₃O₄/TiO₂ hybrids (MgAC-Fe₃O₄/TiO₂) exhibited peroxidase-like catalytic activity to catalyze the oxidation of the peroxidase substrate 2,2′-azino-bis(3-ethylbenzo-thiazoline-6-sulfonic acid) diammonium salt (ABTS) in the presence of H₂O₂, which was significantly enhanced under ultraviolet (UV)-light irradiation. Compared with MgAC-Fe₃O₄ and MgAC-TiO₂, MgAC-Fe₃O₄/TiO₂ showed around three-fold enhancement in the absorption intensity corresponding to the oxidized ABTS under UV-light irradiation, presumably due to the synergistic effect between Fe₃O₄ and TiO₂, thereby facilitating photocatalytic electron transfer during the catalytic action. In addition, the MgAC-Fe₃O₄/TiO₂ showed vivid stability enhancement in wide range of pH and temperature values compared with natural peroxidase. The UV-light-driven MgAC-Fe₃O₄/TiO₂-based system was successfully applied for the colorimetric detection of phenolic compounds, including pyrocatechol and resorcinol, in a dynamic linear range of 0.15–1.30 mg/mL with a limit of detection as low as 0.1 mg/mL. Further, the system could successfully determine the phenolic compounds in spiked tap water, and thus, it can be used for practical applications. We believe that the UV-light-driven enhancement in the peroxidase-like catalytic performances highlights the potential of MgAC-Fe₃O₄/TiO₂ for detecting phenolic compounds as well as other clinically and environmentally important substances. Full article

In recent decades, harmful algal blooms (HABs) have been significantly affecting environments, aquatic ecosystems, and human health, as well as damaging economies, especially near rivers and lakes, and in coastal regions. Microcystis and Anabaena are two genera of harmful cyanobacteria that will often predominate during toxic microalgal blooms. In this study, we employ a method for control and mitigation of HABs by microalgal cell instability using different types of aminoclays (ACs). Allelopathic interactions between the two strains of algae are studied in mono-culture, co-culture, and filtrated cell-free medium in the presence of the ACs. The growth of the Anabaena strain is significantly reduced by the cyanobacterial strains in the co-culture media, and both are significantly affected by the Acs’-enhanced algicidal activity. Anabaena sp. KVSF7 shows higher sensitivity against the ACs than does Microcystis sp. KW. In this way, the algicidal activity of ACs is harnessed, the effects of which are in the order of aluminum aminoclay (AlAC) > magnesium aminoclay (MgAC) > calcium aminoclay (CaAC). The ammonium sites in the ACs carry positive charges to induce instability of HABs along with the electrostatic attraction between algal cells and AC. Therefore, the utilization of the algicidal activity of the ACs can effectively reduce HABs, especially on cyanobacterial blooms. Full article

Magnetically recyclable nanocatalysts with excellent performance are urgent need in heterogeneous catalysis, due to their magnetic nature, which allows for convenient and efficient separation with the help of an external magnetic field. In this research, we developed a simple and rapid method to fabricate a magnetic aminoclay (AC) based an AC@Fe₃O₄@Pd nanocatalyst by depositing palladium nanoparticles (Pd NPs) on the surface of the magnetic aminoclay nanocomposite. The microstructure and the magnetic properties of as-prepared AC@Fe₃O₄@Pd were tested using transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM) analyses. The resultant AC@Fe₃O₄@Pd nanocatalyst with the magnetic Fe-based inner shell, catalytically activate the outer noble metal shell, which when combined with ultrafine Pd NPs, synergistically enhanced the catalytic activity and recyclability in organocatalysis. As the aminoclay displayed good water dispersibility, the nanocatalyst indicated satisfactory catalytic performance in the reaction of reducing nitrophenol and nitroanilines to the corresponding aminobenzene derivatives. Meanwhile, the AC@Fe₃O₄@Pd nanocatalyst exhibited excellent reusability, while still maintaining good activity after several catalytic cycles. Full article

In this paper, we describe the synthesis of magnesium aminoclay-iron oxide (MgAC-Fe₃O₄) hybrid composites for microalgae-harvesting application. MgAC-templated Fe₃O₄ nanoparticles (NPs) were synthesized in different ratios of MgAC and Fe₃O₄ NPs. The uniform distribution of Fe₃O₄ NPs in the MgAC matrix was confirmed by transmission electron microscopy (TEM). According to obtained X-ray diffraction (XRD) patterns, increased MgAC loading leads to decreased intensity of the composites’ (311) plane of Fe₃O₄ NPs. For harvesting of Chlorella sp. KR-1, Scenedesmus obliquus and mixed microalgae (Chlorella sp. KR-1/ Scenedesmus obliquus), the optimal pH was 4.0. At higher pHs, the microalgae-harvesting efficiencies fell. Sample #1, which had the highest MgAC concentration, showed the most stability: the harvesting efficiencies for Chlorella sp. KR-1, Scenedesmus obliquus, and mixed microalgae were reduced only to ~50% at pH = 10.0. The electrostatic interaction between MgAC and the Fe₃O₄ NPs in the hybrid samples by microalgae, as confirmed by zeta potential measurements, were attributed to the harvesting mechanisms. Moreover, the zeta potentials of the MgAC-Fe₃O₄ hybrid composites were reduced as pH was increased, thus diminishing the microalgae-harvesting efficiencies. Full article

In this study, we describe a novel peroxidase-like activity of Co-aminoclay [CoAC] present at pH ~5.0 and its application to fluorescent biosensor for the determination of H₂O₂ and glucose. It is synthesized with aminoclays (ACs) entrapping cationic metals such as Fe, Cu, Al, Co., Ce, Ni, Mn, and Zn to find enzyme mimicking ACs by sol–gel ambient conditions. Through the screening of catalytic activities by the typical colorimetric reaction employing 2,2′-azino-bis(3-ethylbenzo-thiazoline-6-sulfonic acid)diammonium salt (ABTS) as a substrate with or without H₂O₂, Fe, Cu, and CoACs are found to exhibit peroxidase-like activity, as well as oxidase-like activity was observed from Ce and MnACs. Among them, CoAC shows exceptionally high peroxidase-like activity, presumably due to its ability to induce electron transfer between substrates and H₂O₂. CoAC is then used to catalyze the oxidation of Amplex^® UltraRed (AUR) into a fluorescent end product, which enables a sensitive fluorescent detection of H₂O₂. Moreover, a highly sensitive and selective glucose biosensing strategy is developed, based on enzyme cascade reaction between glucose oxidase (GOx) and CoAC. Using this strategy, a highly linear fluorescence enhancement is verified when the concentration of glucose is increased in a wide range from 10 μM to 1 mM with a lower detection limit of 5 μM. The practical diagnostic capability of the assay system is also verified by its use to detect glucose in human blood serum. Based on these results, it is anticipated that CoAC can serve as potent peroxidase mimetics for the detection of clinically important target molecules. Full article