Search Results (15)

Background/Objectives: A sustainable inflammatory response is a significant obstacle for diabetic wound care. In this study, the pH-sensitive multifunctional hydrogel ODex/BSA-Zn was fabricated via a Schiff base and coordination force for the first time. Methods: The hydrogel consisted of oxidized dextran (ODex), bovine serum albumin (BSA), and zinc ions (Zn²⁺) in the absence of an additional crosslinking agent. Results: The hydrogel showed excellent mechanical stability, fast self-healing ability, and significant anti-inflammatory effects, as demonstrated by the formation of dynamic covalent bonds between the aldehyde group (-CHO) of ODex and the amino group (-NH₂) of BSA via the Schiff base reaction, as well as the metal-ion coordination reaction of Zn²⁺ with the imidazole ring of BSA. In a diabetic mouse full-thickness cutaneous defect wound model, the ODex/BSA-Zn hydrogel could effectively inhibit the inflammatory response and increase collagen deposition, thereby accelerating the transition of macrophage M1 to M2 and promoting wound closure. This study offers a promising therapeutic approach for managing long-term diabetic ulcers. Full article

It has been reported that the modification of immobilized glyoxyl–ficin with aldehyde dextran can promote steric hindrances that greatly reduce the activity of the immobilized protease against hemoglobin, while the protease still maintained a reasonable level of activity against casein. In this paper, we studied if this effect may be different depending on the amount of ficin loaded on the support. For this purpose, both the moderately loaded and the overloaded glyoxyl–ficin biocatalysts were prepared and modified with aldehyde dextran. While the moderately loaded biocatalyst had a significantly reduced activity, mainly against hemoglobin, the activity of the overloaded biocatalyst was almost maintained. This suggests that aldehyde dextran was able to modify areas of the moderately loaded enzyme that were not available when the enzyme was overloaded. This modification promoted a significant increase in biocatalyst stability for both biocatalysts, but the stability was higher for the overloaded biocatalyst (perhaps due to a combination of inter- and intramolecular crosslinking). Full article

Deep eutectic solvent (DES) and hot-water extraction (HWE) methods were utilized to extract polysaccharides from Polygonatum sibiricum, referred to as DPsP and WPsP, respectively. The extracted polysaccharides were purified using the Superdex-200 dextran gel purification system, resulting in three components for each type of polysaccharide. The structures of these components were characterized. The molecular weight analysis revealed that DPsP components had slightly larger molecular weights compared with WPsP, with DPsP-A showing a slightly higher dispersity index and broader molecular weight distribution. The main monosaccharide components of both DPsP and WPsP were mannose and glucose, while DPsP exhibited a slightly greater variety of sugar components compared with WPsP. FTIR analysis demonstrated characteristic polysaccharide absorption peaks in all six PSP components, with a predominance of acidic pyranose sugars. NMR analysis revealed the presence of pyranose sugars, including rhamnose and sugar aldehyde acids, in both DPsP-B and WPsP-A. DPsP-B primarily exhibited β-type glycosidic linkages, while WPsP-A predominantly displayed α-type glycosidic linkages, with a smaller fraction being β-type. These findings indicated differences in monosaccharide composition and structure between PSPs extracted using different methods. Overall, this study provided experimental evidence for future research on the structure–function relationship of PSPs. Full article

Due to their high abundance, polymeric character, and chemical tunability, polysaccharides are perfect candidates for the stabilization of photoactive nanoscale objects, which are of great interest in modern science but can be unstable in aqueous media. In this work, we have demonstrated the relevance of oxidized dextran polysaccharide, obtained via a simple reaction with H₂O₂, towards the stabilization of photoactive octahedral molybdenum and tungsten iodide cluster complexes [M₆I₈}(DMSO)₆](NO₃)₄ in aqueous and culture media. The cluster-containing materials were obtained by co-precipitation of the starting reagents in DMSO solution. According to the data obtained, the amount and ratio of functional carbonyl and carboxylic groups as well as the molecular weight of oxidized dextran strongly affect the extent of stabilization, i.e., high loading of aldehyde groups and high molecular weight increase the stability, while acidic groups have some negative impact on the stability. The most stable material based on the tungsten cluster complex exhibited low dark and moderate photoinduced cytotoxicity, which together with high cellular uptake makes these polymers promising for the fields of bioimaging and PDT. Full article

β-galactosidase is an enzyme capable of hydrolysing lactose, used in various branches of industry, mainly the food industry. As the efficient industrial use of enzymes depends on their reuse, it is necessary to find an effective method for immobilisation, maintaining high activity and stability. The present work proposes cross-linked magnetic cross-linked enzyme aggregates (mCLEAs) to prepare heterogeneous biocatalysts of β-galactosidase. Different concentrations of glutaraldehyde (0.6%, 1.0%, 1.5%), used as a cross-linking agent, were studied. The use of dextran-aldehyde as an alternative cross-linking agent was also evaluated. The mCLEAs presented increased recovered activity directly related to the concentration of glutaraldehyde. Modifications to the protocol to prepare mCLEAs with glutaraldehyde, adding a competitive inhibitor or polymer coating, have not been effective in increasing the recovered activity of the heterogeneous biocatalysts or its thermal stability. The biocatalyst prepared using dextran-aldehyde presented 73.6% recovered activity, aside from substrate affinity equivalent to the free enzyme. The thermal stability at 60 °C was higher for the biocatalyst prepared with glutaraldehyde (mCLEA-GLU-1.5) than the one produced with dextran-aldehyde (mCLEA-DEX), and the opposite happened at 50 °C. Results obtained for lactose hydrolysis, the use of its product to produce a rare sugar (D-tagatose) and operational and storage stability indicate that heterogeneous biocatalysts have adequate characteristics for industrial use. Full article

In this study, L-arginine (Arg) modified magnetite (Fe₃O₄) nanoparticles (RMNPs) were firstly synthesized through a one-step co-precipitation method, and then these aminated nanoparticles (NPs) were, again, coated by pre-oxidized dextran (Dext), in which aldehyde groups (DextCHO) have been introduced on the polymer chain successfully via a strong chemical linkage. Arg, an amino acid, acts as a mediator to link the Dext to a magnetic core. The as-synthesized Arg-modified and Dext-coated arginine modified Fe₃O₄ NPs were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and vibrating sample magnetometer (VSM). Both synthesized samples, XRD pattern and FT-IR spectra proved that the core is magnetite. FT-IR confirmed that the chemical bonds of Arg and Dext both exist in the samples. SEM images showed that the NPs are spherical and have an acceptable distribution size, and the VSM analysis indicated the superparamagnetic behavior of samples. The saturation magnetization was decreased after Dext coating, which confirms successive coating RMNPs with Text. In addition, the TGA analysis demonstrated that the prepared magnetic nanocomposites underwent various weight loss levels, which admitted the modification of magnetic cores with Arg and further coating with Dext. Full article

Fermentation with Weissella confusa A16 could improve the flavor of various plant-based sources. However, less is known about the influence of fermentation conditions on the profile of volatile compounds, dextran synthesis and acidity. The present work investigates the synthesis of potential flavor-active volatile compounds, dextran, acetic acid, and lactic acid, as well as the changes in viscosity, pH, and total titratable acidity, during fermentation of faba bean protein concentrate with W. confusa A16. A Response Surface Methodology was applied to study the effect of time, temperature, dough yield, and inoculum ratio on the aforementioned responses. Twenty-nine fermentations were carried out using a Central Composite Face design. A total of 39 volatile organic compounds were identified: 2 organic acids, 7 alcohols, 8 aldehydes, 2 alkanes, 12 esters, 3 ketones, 2 aromatic compounds, and 3 terpenes. Long fermentation time and high temperature caused the formation of ethanol and ethyl acetate and the reduction of hexanal, among other compounds linked to the beany flavor. Levels of dextran, acetic acid, and lactic acid increased with increasing temperature, time, and dough yield. Optimal points set for increased dextran and reduced acidity were found at low temperatures and high dough yield. Such conditions would result in hexanal, ethyl acetate and ethanol having a relative peak area of 35.9%, 7.4%, and 4.9%, respectively. Full article

Here, we propose and study several types of quartz surface coatings designed for the high-performance sorption of biomolecules and their subsequent detection by a photonic crystal surface mode (PC SM) biosensor. The deposition and sorption of biomolecules are revealed by analyzing changes in the propagation parameters of optical modes on the surface of a photonic crystal (PC). The method makes it possible to measure molecular and cellular affinity interactions in real time by independently recording the values of the angle of total internal reflection and the angle of excitation of the surface wave on the surface of the PC. A series of dextrans with various anchor groups (aldehyde, carboxy, epoxy) suitable for binding with bioligands have been studied. We have carried out comparative experiments with dextrans with other molecular weights. The results confirmed that dextran with a Mw of 500 kDa and anchor epoxy groups have a promising potential as a matrix for the detection of proteins in optical biosensors. The proposed approach would make it possible to enhance the sensitivity of the PC SM biosensor and also permit studying the binding process of low molecular weight molecules in real time. Full article

The saccharification of sugarcane bagasse by enzymatic hydrolysis is one of the most promising processes for obtaining fermentable sugar to be used in the production of second-generation ethanol. The objective of this work was to study the immobilization and stabilization of two commercial enzymes: Endocellulase (E-CELBA) in dextran coated iron oxide magnetic nanoparticles activated with aldehyde groups (DIOMNP) and β-glucosidase (E-BGOSPC) in glyoxyl agarose (GLA) so that their immobilized derivatives could be applied in the saccharification of pretreated sugarcane bagasse. This was the first time that the pretreated sugarcane bagasse was saccharified by cascade reaction using a endocellulase immobilized on dextran coated Fe₂O₃ with aldehyde groups combined with a β-glucosidase immobilized on glyoxyl agarose. Both enzymes were successfully immobilized (more than 60% after reduction with sodium borohydride) and presented higher thermal stability than free enzymes at 60, 70, and 80 °C. The enzymatic hydrolysis of the sugarcane bagasse was carried out with 15 U of each enzyme per gram of bagasse in a solid-liquid ratio of 1:20 for 48 h at 50 °C. Under these conditions, 39.06 ± 1.18% of the cellulose present in the pretreated bagasse was hydrolyzed, producing 14.11 ± 0.47 g/L of reducing sugars (94.54% glucose). In addition, DIOMNP endo-cellulase derivative maintained 61.40 ± 1.17% of its enzymatic activity after seven reuse cycles, and GLA β-glucosidase derivative maintained up to 58.20 ± 1.55% of its enzymatic activity after nine reuse cycles. Full article

Naringinase is an enzymatic complex used in the deglycosylation of compounds with a high application potential in the food and pharmaceutical industries. The aim of the study was to immobilize naringinase from Aspergillus niger KMS on a magnetic carrier obtained on the basis of carob gum activated by polyethyleneimine. Response surface methodology was used to optimize naringinase immobilization taking into account the following factors: pH, immobilization time, initial concentration of naringinase and immobilization temperature. The adsorption of the enzyme on a magnetic carrier was a reversible process. The binding force of naringinase was increased by crosslinking the enzyme with the carrier using dextran aldehyde. The crosslinked enzyme had better stability in an acidic environment and at a higher temperature compared to the free form. The immobilization and stabilization of naringinase by dextran aldehyde on the magnetic polysaccharide carrier lowered the activation energy, thus increasing the catalytic capacity of the investigated enzyme and increasing the activation energy of the thermal deactivation process, which confirms higher stability of the immobilized enzyme in comparison with free naringinase. The preparation of crosslinked naringinase retained over 80% of its initial activity after 10 runs of naringin hydrolysis from fresh and model grapefruit juice. Full article

Dextran aldehyde (dexOx), resulting from the periodate oxidative cleavage of 1,2-diol moiety inside dextran, is a polymer that is very useful in many areas, including as a macromolecular carrier for drug delivery and other biomedical applications. In particular, it has been widely used for chemical engineering of enzymes, with the aim of designing better biocatalysts that possess improved catalytic properties, making them more stable and/or active for different catalytic reactions. This polymer possesses a very flexible hydrophilic structure, which becomes inert after chemical reduction; therefore, dexOx comes to be highly versatile in a biocatalyst design. This paper presents an overview of the multiple applications of dexOx in applied biocatalysis, e.g., to modulate the adsorption of biomolecules on carrier surfaces in affinity chromatography and biosensors design, to serve as a spacer arm between a ligand and the support in biomacromolecule immobilization procedures or to generate artificial microenvironments around the enzyme molecules or to stabilize multimeric enzymes by intersubunit crosslinking, among many other applications. Full article

In this study, the innovative and multifunctional nanoparticles–hydrogel nanocomposites made with chitosan hydrogel beads and solid lipid–polymer hybrid nanoparticles (SLPN) were prepared through conjugation between SLPN and chitosan beads. The SLPNs were first fabricated via coating the bovine serum albumin (BSA)-emulsified solid lipid nanoparticles with oxidized dextran. The aldehyde groups of the oxidized dextran on the surface of the SLPN enabled an in situ conjugation with the chitosan beads through the Schiff base linkage. The obtained nano-on-beads composite exhibited a spherical shape with a homogeneous size distribution. The successful conjugation of SLPN on the chitosan beads was confirmed by a Fourier transform infrared spectroscopy and a scanning electron microscope. The effects of the beads dosage (50, 100, 200, and 300 beads) and the incubation duration (30, 60, 90, 120, and 150 min) on the conjugation efficiency of SLPN onto the beads were comprehensively optimized. The optimal formulations were found to be a 200 bead dosage, with 30–90 min incubation duration groups. The optimal formulations were then used to encapsulate thymol, an antibacterial agent, which was studied as a model compound. After encapsulation, the thymol exhibited sustained release profiles in the phosphate buffer saline. The as-prepared nanoparticles–hydrogel nanocomposites reported in this proof-of-concept study hold promising features as a controlled-release antibacterial approach for improving food safety. Full article

Immobilized enzymes have a very large region that is not in contact with the support surface and this region could be the target of new stabilization strategies. The chemical amination of these regions plus further cross-linking with aldehyde-dextran polymers is proposed here as a strategy to increase the stability of immobilized enzymes. Aldehyde-dextran is not able to react with single amino groups but it reacts very rapidly with polyaminated surfaces. Three lipases—from Thermomyces lanuginosus (TLL), Rhizomucor miehiei (RML), and Candida antarctica B (CALB)—were immobilized using interfacial adsorption on the hydrophobic octyl-Sepharose support, chemically aminated, and cross-linked. Catalytic activities remained higher than 70% with regard to unmodified conjugates. The increase in the amination degree of the lipases together with the increase in the density of aldehyde groups in the dextran-aldehyde polymer promoted a higher number of cross-links. The sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis of those conjugates demonstrates the major role of the intramolecular cross-linking on the stabilization of the enzymes. The highest stabilization was achieved by the modified RML immobilized on octyl-Sepharose, which was 250-fold more stable than the unmodified conjugate. The TLL and the CALB were 40-fold and 4-fold more stable than the unmodified conjugate. Full article

A highly oxidized form of a chitosan/dextran-based hydrogel (CD-100) containing 80% oxidized dextran aldehyde (DA-100) was developed as a post-operative aid, and found to significantly prevent adhesion formation in endoscopic sinus surgery (ESS). However, the CD-100 hydrogel showed moderate in vitro cytotoxicity to mammalian cell lines, with the DA-100 found to be the cytotoxic component. In order to extend the use of the hydrogel to abdominal surgeries, reformulation using a lower oxidized DA (DA-25) was pursued. The aim of the present study was to compare the antimicrobial efficacy, in vitro biocompatibility and wound healing capacity of the highly oxidized CD-100 hydrogel with the CD-25 hydrogel. Antimicrobial studies were performed against a range of clinically relevant abdominal microorganisms using the micro-broth dilution method. Biocompatibility testing using human dermal fibroblasts was assessed via a tetrazolium reduction assay (MTT) and a wound healing model. In contrast to the original DA-100 formulation, DA-25 was found to be non-cytotoxic, and showed no overall impairment of cell migration, with wound closure occurring at 72 h. However, the lower oxidation level negatively affected the antimicrobial efficacy of the hydrogel (CD-25). Although the CD-25 hydrogel’s antimicrobial efficacy and anti-fibroblast activity is decreased when compared to the original CD-100 hydrogel formulation, previous in vivo studies show that the CD-25 hydrogel remains an effective, biocompatible barrier agent in the prevention of postoperative adhesions. Full article

Nucleoside 2'-deoxyribosyltransferase (NDT) from the psychrophilic bacterium Bacillus psychrosaccharolyticus CECT 4074 has been cloned and produced for the first time. A preliminary characterization of the recombinant protein indicates that the enzyme is an NDT type II since it catalyzes the transfer of 2'-deoxyribose between purines and pyrimidines. The enzyme (BpNDT) displays a high activity and stability in a broad range of pH and temperature. In addition, different approaches for the immobilization of BpNDT onto several supports have been studied in order to prepare a suitable biocatalyst for the one-step industrial enzymatic synthesis of different therapeutic nucleosides. Best results were obtained by adsorbing the enzyme on PEI-functionalized agarose and subsequent cross-linking with aldehyde-dextran (20 kDa and 70% oxidation degree). The immobilized enzyme could be recycled for at least 30 consecutive cycles in the synthesis of 2'-deoxyadenosine from 2'-deoxyuridine and adenine at 37 °C and pH 8.0, with a 25% loss of activity. High conversion yield of trifluridine (64.4%) was achieved in 2 h when 20 mM of 2'-deoxyuridine and 10 mM 5-trifluorothymine were employed in the transglycosylation reaction catalyzed by immobilized BpNDT at 37 °C and pH 7.5. Full article