Search Results (12)

The use of laser cutter machines to produce porous graphene films is an innovative method for a low-cost production of flexible electrodes for electronics and sensing applications. Here, laser-induced graphene (LIG) is used to produce the gate electrodes of EGFET sensors. LIG electrodes and LIG electrodes functionalized with ZnO and metalloporphyrin-coated ZnO are used as elements of the electronic tongue. The array is tested in a classical experiment aimed at identifying complex food matrices, such as fruit juices. The results demonstrate the feasibility of the approach and provide a solid basis for further array developments. Full article

Photocatalysis is one of the most promising technologies to achieve efficient carbon dioxide reduction reaction (CO₂RR) under mild conditions. Herein, metalloporphyrin-based metal–organic frameworks (MOFs) with different metal centers, denoted as PCN-222, were utilized as visible-light photocatalysts for CO₂ reduction. Due to the combination of the conjugated planar macrocyclic structures of metalloporphyrins and the stable porous structures of MOFs, all PCN-222 materials exhibited excellent light-harvesting and CO₂-adsorbing abilities. Among the studied MOFs of varied metal centers (M = Pt, Fe, Cu, Zn, Mn), PCN-222(2H&Zn) exhibited the highest photocatalytic CO₂RR performance, with an average CO yield of 3.92 μmol g⁻¹ h⁻¹ without any organic solvent or sacrificial agent. Furthermore, this was three and seven times higher than that of PCN-222(Zn) (1.36 μmol g⁻¹ h⁻¹) and PCN-222(2H) (0.557 μmol g⁻¹ h⁻¹). The superior photocatalytic activity of PCN-222(2H&Zn) was attributed to its effective photoexcited electron–hole separation and transportation compared with other PCN-222(2H&M) materials. The obtained results indicate that Zn ions in the porphyrin’s center played an important role in the reaction of active sites for the adsorption–activation of CO₂. In addition, PCN-222(2H&Zn) showed the highest CO₂ selectivity (almost 100%) and stability. This work provides a clear guide for the design of efficient photocatalysts. Full article

This work describes the synthesis of a novel zinc(II) porphyrin complex, namely [Meso-4α-tetra-(1,2,3-triazolyl)phenylporphyrinato]zinc(II) symbolized by 4α-[Zn(TAzPP)] (4), using the click chemistry approach in the presence of copper iodide. All of the synthetic porphyrin species reported herein were fully characterized by elemental analysis, infrared spectroscopy, proton nuclear magnetic resonance, UV-visible spectroscopy, and fluorescence. To synthesize the 4α-[Zn(TAzPP)] complex (4), we produced 4α-Meso-tetra-o-nitrophenylporphyrin (H₂T_NO2PP) and 4α-meso-tetra-o-aminophenylporphyrin (4α-H₂TNH₂PP) (1) using known classic literature methods. This 4α atropisomer was converted to 4α-meso-tetra-o-azidophenylporphyrin (4α-H₂TN₃PP) (3) by reaction with sodium nitrite and sodium azide, and then it was metalated by Zn(II), leading to [4α-meso-tetra(2-azidophenyl)porphyrinate]zinc(II) (4α-[Zn(TN₃PP)]) (3). The click chemistry synthetic method was finally used to prepare 4α-[Zn(TAzPP)] (4). This new tetracoordinated zinc(II) porphyrin complex was prepared and characterized in order to: (i) produce a receptor for anion recognition and sensing application for Cl⁻ and Br⁻; (ii) study the catalytic decomposition of rhodamine B (RhB) and methyl orange (MO) dyes; and (iii) determine the electronic characteristics as a photovoltaic device. Complex (4) formed 1:1 complex stoichiometric species with chloride and bromide halides and the average association constants of the 1:1 addicts were ~ 10³. The photodecomposition of RhB and MO dyes in the presence of complex (4) as a catalyst and molecular oxygen showed that complex (4) presented a photodegradation yield of approximately 70% and could be reused for five successive cycles without any obvious change in its catalytic activity. The current-voltage characteristics and impedance spectroscopy measurements of complex (4) confirmed that our zinc(II) metalloporphyrin could be used as a photovoltaic device. Full article

Hydrogen, considered to be an alternative fuel to traditional fossil fuels, can be generated by splitting water molecules into hydrogen and oxygen via the use of electrical energy, in a process whose efficiency depends directly on the employed catalytic material. The current study takes part in the relentless search for suitable and low-cost catalysts relevant to the water-splitting field by investigating the electrocatalytic properties of the O₂ and H₂ evolution reactions (OER and HER) of two metalloporphyrins: Zn(II) 5,10,15,20-tetrakis(4-pyridyl)-porphyrin and Co(II) 5,10,15,20-tetrakis(3-hydroxyphenyl)-porphyrin. The TEM/STEM characterisation of the porphyrin samples obtained using different organic solvents revealed several types of self-assembled aggregates. The HER and OER experiments performed on porphyrin-modified graphite electrodes in media with different pH values revealed the most electrocatalytically active specimens. For the OER, this specimen was the electrode manufactured with one layer of Co-porphyrin applied from dimethylsulfoxide, exhibiting an overpotential of 0.51 V at i = 10 mA/cm² and a Tafel slope of 0.27 V/dec. For the HER, it was the sample obtained by drop casting one layer of Zn-porphyrin from N,N-dimethylformamide that displayed a HER overpotential of 0.52 V at i = −10 mA/cm² and a Tafel slope of 0.15 V/dec. Full article

Caffeic acid is an antioxidant that has been widely been related to the health benefits of people in recent years. In this paper, the amino side chains of chitosan (CS) were modified with protoporphyrin IX by amide cross-linking, and then Zn ions were chelated. The properties of metalloporphyrin-preparing functionalized multi-walled carbon nanotubes (MWCNTs) and Zn ions chelated by protoporphyrin IX composites were used as sensitive-selective electrochemical biosensors for the determination of caffeic acid. The morphology and structure of nanocomposite Zn–PPIX–CS–MWCNTs were observed by X-ray spectroscopy mapping (EDX mapping), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR). The electrochemical behaviors of Zn–PPIX–CS–MWCNT-modified glassy carbon (GC) electrodes were evaluated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results show that the modified electrode had good electrocatalytic activity towards caffeic acid with a wide linear range of 0.0008–1.6 mM, an excellent sensitivity of 886.90 µAmM⁻¹cm⁻¹, and a detection limit of 0.022 µM. In addition, the caffeic acid sensor had excellent reproducibility, stability, and selectivity to various interfering substances. Therefore, the modified electrode prepared by this experiment can also be applied to electrochemical sensors of other substances. Full article

Oxygen evolution reaction (OER) plays a pivotal role in the development of renewable energy methods, such as water-splitting devices and the use of Zn–air batteries. First-row transition metal complexes are promising catalyst candidates due to their excellent electrocatalytic performance, rich abundance, and cheap price. Metalloporphyrins are a class of representative high-efficiency complex catalysts owing to their structural and functional characteristics. However, OER based on porphyrin systems previously have been paid little attention in comparison to the well-described oxygen reduction reaction (ORR), hydrogen evolution reaction, and CO₂ reduction reaction. Recently, porphyrin-based systems, including both small molecules and porous polymers for electrochemical OER, are emerging. Accordingly, this review summarizes the recent advances of porphyrin-based systems for electrochemical OER. Firstly, the electrochemical OER for water oxidation is discussed, which shows various methodologies to achieve catalysis from homogeneous to heterogeneous processes. Subsequently, the porphyrin-based catalytic systems for bifunctional oxygen electrocatalysis including both OER and ORR are demonstrated. Finally, the future development of porphyrin-based catalytic systems for electrochemical OER is briefly prospected. Full article

Candida albicans is the main cause of superficial candidiasis. While the antifungals available are defied by biofilm formation and resistance emergence, antimicrobial photodynamic inactivation (aPDI) arises as an alternative antifungal therapy. The tetracationic metalloporphyrin Zn(II) meso-tetrakis(N-n-hexylpyridinium-2-yl)porphyrin (ZnTnHex-2-PyP⁴⁺) has high photoefficiency and improved cellular interactions. We investigated the ZnTnHex-2-PyP⁴⁺ as a photosensitizer (PS) to photoinactivate yeasts and biofilms of C. albicans strains (ATCC 10231 and ATCC 90028) using a blue light-emitting diode. The photoinactivation of yeasts was evaluated by quantifying the colony forming units. The aPDI of ATCC 90028 biofilms was assessed by the MTT assay, propidium iodide (PI) labeling, and scanning electron microscopy. Mammalian cytotoxicity was investigated in Vero cells using MTT assay. The aPDI (4.3 J/cm²) promoted eradication of yeasts at 0.8 and 1.5 µM of PS for ATCC 10231 and ATCC 90028, respectively. At 0.8 µM and same light dose, aPDI-treated biofilms showed intense PI labeling, about 89% decrease in the cell viability, and structural alterations with reduced hyphae. No considerable toxicity was observed in mammalian cells. Our results introduce the ZnTnHex-2-PyP⁴⁺ as a promising PS to photoinactivate both yeasts and biofilms of C. albicans, stimulating studies with other Candida species and resistant isolates. Full article

Metal effects on the gas sensing behavior of metal complexes of 5,10,15,20-tetrakis(4-hydroxyphenyl)porphyrin (THPP) thin film was investigated in terms of detecting NO₂ gas by the planar optical waveguide. For this purpose, several THPP and metal complexes were synthesized with different central metal ions: Co(II), Ni(II), Cu(II), and Zn(II). Planar optical gas sensors were fabricated with the metalloporphyrins deposited on K⁺ ion-exchanged soda-lime glass substrate with the spin coating method serving as host matrices for gas interaction. All of the THPP complex’s films were fully characterized by UV-Vis, IR and XPS spectroscopy, and the laser light source wavelength was selected at 520 and 670 nm. The results of the planar optical waveguide sensor show that the Zn–THPP complex exhibits the strongest response with the lowest detectable gas concentration of NO₂ gas for both 520 nm and 670 nm. The Ni–THPP and Co–THPP complexes display good efficiency in the detection of NO₂, while, on the other hand, Cu–THPP shows a very low interaction with NO₂ gas, with only 50 ppm and 200 ppm detectable gas concentration for 520 nm and 670 nm, respectively. In addition, molecular dynamic simulations and quantum mechanical calculations were performed, proving to be coherent with the experimental results. Full article

The study of excited-state energy diffusion has had an important impact in the development and optimization of organic electronics. For instance, optimizing excited-state energy migration in the photoactive layer in an organic solar cell device has been shown to yield efficient solar energy conversion. Despite the crucial role that energy migration plays in molecular electronic device physics, there is still a great deal to be explored to establish how molecular orientation impacts energy diffusion mechanisms. In this work, we have synthesized a new library of solution-processable, Zn (alkoxycarbonyl)phenylporphyrins containing butyl (ZnTCB₄PP), hexyl (ZnTCH₄PP), 2-ethylhexyl (ZnTCEH₄PP), and octyl (ZnTCO₄PP) alkoxycarbonyl groups. We establish that, by varying the length of the peripheral alkyl chains on the metalloporphyrin macrocycle, preferential orientation and molecular self-assembly is observed in solution-processed thin films. The resultant arrangement of molecules consequently affects the electronic and photophysical characteristics of the metalloporphyrin thin films. The various molecular arrangements in the porphyrin thin films and their resultant impact were determined using UV-Vis absorption spectroscopy, steady-state and time-resolved fluorescence emission lifetimes, and X-ray diffraction in thin films. The films were doped with C₆₀ quencher molecules and the change in fluorescence was measured to derive a relative quenching efficiency. Using emission decay, relative quenching efficiency, and dopant volume fraction as input, insights on exciton diffusion coefficient and exciton diffusion lengths were obtained from a Monte Carlo simulation. The octyl derivative (ZnTCO₄PP) showed the strongest relative fluorescence quenching and, therefore, the highest exciton diffusion coefficient (5.29 × 10⁻³ cm² s⁻¹) and longest exciton diffusion length (~81 nm). The octyl derivative also showed the strongest out-of-plane stacking among the metalloporphyrins studied. This work demonstrates how molecular self-assembly can be used to modulate and direct exciton diffusion in solution-processable metalloporphyrin thin films engineered for optoelectronic and photonic applications. Full article

Nanocomposite thin films, sensitive to methane at the room temperature (25–30 °C), have been prepared, starting from SnSe₂ powder and Zn(II)-5,10,15,20-tetrakis-(4-aminophenyl)- -porphyrin (ZnTAPP) powder, that were fully characterized by XRD, UV-VIS, FT-IR, Nuclear Magnetic Resonance (¹H-NMR and ¹³C-NMR), Atomic Force Microscopy (AFM), SEM and Electron Paramagnetic Resonance (EPR) techniques. Film deposition was made by drop casting from a suitable solvent for the two starting materials, after mixing them in an ultrasonic bath. The thickness of these films were estimated from SEM images, and found to be around 1.3 μm. These thin films proved to be sensitive to a threshold methane (CH₄) concentration as low as 1000 ppm, at a room temperature of about 25 °C, without the need for heating the sensing element. The nanocomposite material has a prompt and reproducible response to methane in the case of air, with 50% relative humidity (RH) as well. A comparison of the methane sensing performances of our new nanocomposite film with that of other recently reported methane sensitive materials is provided. It is suitable for signaling gas presence before reaching the critical lower explosion limit concentration of methane at 50,000 ppm. Full article

Heme oxygenase-1 (HO-1) is induced by a variety of stimuli and plays a multifaceted role in cellular protection. We have shown that HO-1 is overexpressed in thyroid cancer and is associated with tumor aggressiveness. Therefore, we set out to assess the effects of HO-1 inhibitors on the biology of thyroid cancer cells. Two different classes of HO-1 inhibitors were used, including a metalloporphyrin, zinc protoporphyrin-IX (ZnPP), and an azole antifungal agent, ketoconazole. The viability and colony formation of thyroid cancer cells decreased in a concentration- and time-dependent fashion following treatment with HO-1 inhibitors. Cancer cells exhibited a higher sensitivity to HO-1 inhibitors than non-malignant cells. HO-1 inhibitors induced a G0/G1 arrest accompanied by decreased cyclin D1 and CDK4 expressions and an increase in levels of p21 and p27. HO-1 inhibitors significantly increased intracellular ROS levels and suppressed cell migration and invasion. Oxygen consumption rate and mitochondrial mass were increased with ZnPP treatment. Mice treated with ZnPP had a reduced xenograft growth and diminished cyclin D1 and Ki-67 staining in tumor sections. Taken together, HO-1 inhibitors might have therapeutic potential for inducing cell cycle arrest and promoting growth suppression of thyroid cancer cells in vitro and in vivo. Full article

This work is focused on a novel class of hybrid materials exhibiting enhanced optical properties and high surface areas that combine the morphology offered by the vinyl substituted silica host, and the excellent absorption and emission properties of 5,10,15,20-tetrakis(N-methyl-4-pyridyl)porphyrin-Zn(II) tetrachloride as a water soluble guest molecule. In order to optimize the synthesis procedure and the performance of the immobilized porphyrin, silica precursor mixtures of different compositions were used. To achieve the requirements regarding the hydrophobicity and the porous structure of the gels for the successful incorporation of porphyrin, the content of vinyltriacetoxysilane was systematically changed and thoroughly investigated. Substitution of the silica gels with organic groups is a viable way to provide new properties to the support. An exhaustive characterization of the synthesized silica samples was realised by complementary physicochemical methods, such as infrared spectroscopy (FT-IR), absorption spectroscopy (UV-Vis) and photoluminescence, nuclear magnetic resonance spectroscopy (²⁹Si-MAS-NMR) transmission and scanning electron microscopy (TEM and SEM), nitrogen absorption (BET), contact angle (CA), small angle X ray and neutron scattering (SAXS and SANS). All hybrids showed an increase in emission intensity in the wide region from 575 to 725 nm (Q bands) in comparison with bare porphyrin. By simply tuning the vinyltriacetoxysilane content, the hydrophilic/hydrophobic profile of the hybrid materials was changed, while maintaining a high surface area. Good control of hydrophobicity is important to enhance properties such as dispersion, stability behaviour, and resistance to water, in order to achieve highly dispersible systems in water for biomedical applications. Full article