Search Results (21,369)

As the primary bioactive flavonoid in Coreopsis tinctoria, okanin has emerged as a promising antioxidant compound of substantial pharmacological interest. However, its efficacy against UVA-mediated photoaging remains unexplored. This research investigated the molecular mechanism underlying the photoprotective activity of okanin against UVA-mediated photoaging. Network pharmacology was employed to predict the pharmacological mechanism of Coreopsis tinctoria in skin photoaging, which was then validated through in vivo and in vitro studies. In vitro experiments indicated that treatment with okanin alleviated oxidative damage, apoptosis and mitochondrial dysfunction in HaCaT cells exposed to UVA radiation. In addition, the interaction between okanin and SIRT3 was confirmed using molecular docking, SPR and DARTS assays. However, silencing SIRT3 with siRNA abolished the promoting effects of okanin on mitophagy genes, confirming that okanin protects HaCaT cells against UVA damage through SIRT3 regulation. In in vivo, okanin enhanced the expression of SIRT3 and FOXO3a in dorsal skin, mitigating UV-mediated skin damage. Taken together, our results suggest the protective effects of okanin against UV radiation in both HaCaT cells and mice induced, at least in part, by regulating SIRT3/FOXO3a/PINK1/Parkin signaling pathway. These findings highlight the potential of okanin for use in skin care products aimed at promoting skin repair following UVA exposure. Full article

Poly (3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) stands out as a renowned commercial conducting polymer composite, boasting extensive and promising applications in the realm of film electronics. In this study, we have made a concerted effort to overcome the inherent drawbacks of PEDOT:PSS films (especially, high moisture absorption, mechanical damage vulnerability, insufficient substrate adhesion ability, etc.) by uniformly blending them with polydimethylsiloxane polyurea (PDMS-PUa) and silica (SiO₂) nanoparticles through a feasible mechanical stirring process, which effectively harnesses the intermolecular interactions, as well as the morphological and structural characteristics, among the various components. The Si−O bonds within PDMS-PUa and the −CH₃ groups attached to Si atoms significantly enhance the hydrophobicity of the composite film (as evidenced by a water contact angle of 132.89° under optimized component ratios). Meanwhile, SiO₂ microscopically modifies the surface morphology, resulting in increased surface roughness. This composite film not only maintains high conductivity (1.21 S/cm, in contrast to 0.83 S/cm for the PEDOT:PSS film) but also preserves its hydrophobicity and electrical properties under rigorous conditions, including high-temperature exposure (60–200 °C), ultraviolet (UV) aging (365.0 nm, 1.32 mW/cm²), and abradability testing (2000 CW abrasive paper, drag force of approximately 0.98 N, 40 cycles). Furthermore, the film demonstrates enhanced resistance to both acidic (1 mol/L, 24 h) and alkaline (1 mol/L, 24 h) environments, along with excellent self-cleaning and de-icing capabilities (−6 °C), and satisfactory adhesion (Level 2). Notably, the dried composite film can be re-dispersed into a solution with the aid of isopropanol through simple magnetic stirring, and the sequentially coated films also exhibit good surface hydrophobicity (136.49°), equivalent to that of the pristine film. This research aims to overcome the intrinsic performance drawbacks of PEDOT:PSS-based materials, enabling them to meet the demands of complex application scenarios in the field of organic electronics while endowing them with multifunctionality. Full article

Deep eutectic solvents (DESs) have been studied to obtain extracts from medicinal plants, aiming for a more environmentally friendly process. Aligned with this initiative, the use of predictive thermodynamic models for screening the best solvent represents a theoretical action to reduce experimental time and cost. Therefore, this study aimed to perform and validate a relative solubility screening of 5-methoxy-6,7-methylenedioxycoumarin and prenyletin-methyl-ether at 313 K in choline chloride, menthol, and betaine-based DES, using the COSMO-RS model in COSMOThermX software. The density of DES was also predicted with a maximum error of 7.31% for this property. Ultrasound-assisted extraction (UAE) with DES at 313 K, 30 min, and a solid/liquid ratio of 1:20 (w/w) was performed to confirm the theoretical solubility results experimentally, as the extracts were analyzed through ultrafast liquid chromatography (UFLC) for coumarin content. For the results, the coumarin molecules presented intense peaks in the nonpolar region of their σ-profile, and the relative solubility screening indicated the DES Men/Lau (2:1), known for its hydrophobic nature and low polarity, as the best DES to solubilize these coumarins. Nevertheless, the UFLC results, and the complementary solubility screening of pigments, showed an interaction preference of this DES with chlorophylls instead of coumarins. This result was corroborated by spectrophotometric analysis of the extracts in UV-Vis, demonstrating that experimental validation is still mandatory in extraction processes and that predictive methodologies such as COSMO-RS should be used as guiding tools and analyzed in a greater context, considering the complexity of plant matrices in the beginning of simulations. Full article

Agricultural pest detection through image analysis is a key technology in automated pest-monitoring systems. However, some existing pest detection models face excessive model complexity. This study proposes YOLO-LCE, a lightweight model based on the YOLOv8 architecture for agricultural pest detection. Firstly, a Lightweight Complementary Residual (LCR) module is proposed to extract complementary features through a dual-branch structure. It enhances detection performance and reduces model complexity. Additionally, Efficient Partial Convolution (EPConv) is proposed as a downsampling operator. It adopts an asymmetric channel splitting strategy to efficiently utilize features. Furthermore, the Ghost module is introduced to the detection head to reduce computational overhead. Finally, WIoUv3 is used to improve detection performance further. YOLO-LCE is evaluated on the Pest24 dataset. Compared to the baseline model, YOLO-LCE achieves mAP50 improvement of 1.7 percentage points, mAP50-95 improvement of 0.4 percentage points, and precision improvement of 0.5 percentage points. For computational efficiency, parameters are reduced by 43.9%, and GFLOPs are reduced by 33.3%. These metrics demonstrate that YOLO-LCE improves detection accuracy while reducing computational complexity, providing an effective solution for lightweight pest detection. Full article

Objectives: The aim of the present study was to better understand the antibody concentrations in healthcare workers (HCWs) from a hospital in Mexico City with a high density of COVID-19 patients. Methods: Up to 243 HCWs were recruited in 2020 and 2022 and were sorted into three groups: hybrid immunity (HI, natural infection plus vaccination), vaccine-induced immunity (VI), and unvaccinated but RT-qPCR negative at the beginning of the pandemic (UV). Peripheral blood and nasopharyngeal swab samples were obtained; additionally, saliva samples were obtained from the UV group. The titers of IgG, IgM, and IgA against the SARS-CoV-2 receptor-binding domain (RBD) and nucleocapsid (NCP) proteins were assessed using an in-house ELISA, and positivity to the virus was determined via RT-qPCR. Results: Most HI and VI participants were positive for serum anti-RBD IgG (92.8% and 100%, respectively), while 26.6% (for HI) and 19% (for VI) were positive for anti-NCP IgG. Regarding serum anti-RBD IgA, the VI and HI groups had positive rates of 87.3% and 66%, respectively. In contrast, the UV group showed a rate of 5.7% but the positivity for IgA in saliva was higher (52% for RBD and 35% for NCP). In addition, the highest antibody titers were obtained for anti-RBD IgG and IgA in the HI and VI groups, respectively. In saliva, the IgA antibody titer was higher for the RBD antigen (1:1280). Conclusions: These results strengthen our understanding of antibody concentrations in HCWs during two critical years of the pandemic in a general hospital with many COVID-19 patients. Full article

The abuse of quinolone antibiotics in the medical and livestock industries potentially causes environmental accumulation that may impair ecological stability. Based on the organic ligand 5-(pyrazole-1-yl) pyridine-5-yl) terephthalic acid (H₂PPIPA), a terbium(III) complex, [Tb(HPPIPA)(PPIPA)(H₂O)]ₙ (complex 1), was synthesized via solvothermal reaction with Tb(NO₃)₃·6H₂O. Luminescence studies revealed that complex 1 functions as a turn-on fluorescent probe for the selective detection of ofloxacin (OFX), levofloxacin (LFX), and norfloxacin (NFX), with detection limits of 27.9, 17.1, and 8.0 nM, respectively. Owing to its high selectivity and anti-interference capability, the complex was successfully applied for the determination of OFX and LFX in milk samples. Furthermore, a test strip impregnated with complex 1 enabled naked-eye fluorescence detection of OFX, LFX, and NFX under 254 nm UV light. Additionally, a fluorescence sensing film fabricated from complex 1 exhibited excellent recyclability, allowing for at least seven consecutive detection cycles without significant signal loss. This study innovatively designed and synthesized a novel Tb(III)-based coordination polymer fluorescent probe utilizing an original ligand scaffold, achieving the first reported visual detection of quinolone antibiotics with fluorescence test strips and agar films. Full article

Papaver rhoeas L. has four strikingly red petals with a distinctly black area bordered by a thin white line at the petal base, thus creating a color pattern that makes the center of the flower, where the pollen is located, visually stand out. This paper aims to assess the intra-petal spatial variability in P. rhoeas petal color intensity and hue and associate it with corresponding differences in the amount and type of petal pigments. The distribution of pigments in the petal epidermis was investigated in different petal segments by column chromatography. Fresh petals were extracted with deionized water during blooming, between April and June 2023, in northwestern Greece. UV–visible absorption spectra of the eluted fractions revealed five pigments, with each pigment belonging to a different elution zone. In the black spots of the petals, anthocyanin coexists with a yellow flavonol with a maximum absorption peak at 340 nm. Red petal extract in 70:30 ethanol–water showed a distinct negative Cotton effect at 284 nm, distinct from black segment extract with a negative Cotton effect at 227 nm. The uneven distribution of floral pigments along the petal epidermis creates a unique color palette, enabling UV-reflection, which is key in attracting pollinators responsible for plant reproduction. Full article

The search for novel natural resources, such as extracts from algae and plant for use as reductants and capping agents for the synthesis of nanoparticles, may be appealing to medicine and nanotechnology. This study aimed to use Malva parviflora fruit extract as a novel source for the green synthesis of silver nanoparticles (AgNPs) and to evaluate their characterization. The results of biosynthesized AgNP characterization using multiple techniques, such as UV–Vis spectroscopy, scanning electron microscopy (SEM), FTIR analysis, and zeta potential (ZP), demonstrated that M. parviflora AgNPs exhibit a peak at 477 nm; possess needle-like and nanorod morphology with diameters ranging from 156.08 to 258.41 nm; contain –OH, C=O, C-C stretching from phenyl groups, and carbohydrates, pyranoid ring, and amide functional groups; and have a zeta potential of −21.2 mV. Moreover, the antibacterial activity of the M. parviflora AgNPs was assessed against two multidrug-resistant strains, including Staphylococcus aureus MRSA and Escherichia coli ESBL, with inhibition zones of 20.33 ± 0.88 mm and 13.33 ± 0.33 mm, respectively. The minimum bactericidal concentration (MBC) was 1.56 µg/mL for both. SEM revealed structural damage to the treated bacterial cells, and RAPD-PCR confirmed these genetic alterations. Additionally, M. parviflora AgNPs showed antioxidant activity (IC₅₀ = 0.68 mg/mL), 69% protein denaturation inhibition, and cytotoxic effects on MCF-7 breast cancer cells at concentrations above 100 µg/mL. These findings suggest that M. parviflora-based AgNPs are safe and effective for antimicrobial and biomedical applications, such as coatings for implanted medical devices, to prevent biofilm formation and facilitate drug delivery. Full article

Mismanagement of rural wastewater can lead to environmental contamination with the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Fungi with bioremediating potential constitute a sustainable alternative to decontaminate such wastewater before its reuse. This study evaluated the ability of Aspergillus oryzae pellets to remove 2,4-D from natural and sterile rural wastewater (i.e., with/without native microbiota). The pellets were produced by incubating conidial solutions of A. oryzae strains RCA2, RCA4, RCA5, and RCA10 in synthetic wastewater for 21 days at 25 °C. The wastewater samples were characterized physicochemically and microbiologically upon arrival at the laboratory. Afterwards, they were supplemented with 1, 2.5, or 5 mmol L⁻¹ of 2,4-D and inoculated with the pellets. Physicochemical characterization was repeated throughout the experiment. Herbicide removal and the presence of 2,4-D degradation intermediate, 2,4-dichlorophenol (2,4-DCP), were assessed through high-pressure liquid chromatography with UV/Vis detection (HPLC-UV) and mass spectrometry. At the beginning of the assay, the macro- and micronutrient content in the samples were suitable to sustain fungal growth. By the end, pH had increased and sodium and nitrate levels decreased in comparison with the control. RCA2, RCA4, and RCA10 removed over 80% of 2,4-D after 7 days of incubation, at the three herbicide concentrations tested. Moreover, wet fungal biomass had increased by the end of the assay. These findings demonstrate that RCA2, RCA4, and RCA10 can grow, form pellets, and remove 2,4-D in natural rural wastewater, which makes them potential candidates for bioremediation strategies aimed at improving the quality of water set to be reused. Full article

Toxicological effects of microplastics (MPs) have been confirmed in a variety of microorganisms in aquatic environments, and they are closely correlated with the physicochemical properties of the MPs. In a natural environment, different aging treatments always induce different alterations in the physicochemical properties of MPs, thus influencing their environmental behaviors and biotoxicity. In this work, physicochemical properties and toxicity towards Escherichia coli (E. coli) were investigated in polystyrene (PS) MPs (3 and 10 μm) before and after aging by UV irradiation and biofilm formation, respectively. The results show that UV irradiation and biofilm formation led to different alterations in the surface morphologies and functional groups of PS. The UV-aged 3 μm PS had the strongest inhibitory effect on E. coli growth, and the bio-aged 10 μm PS had the strongest beneficial effect on E. coli growth. Also, the ATPase activity, production of intercellular ROS, and MDA content of the E. coli were affected differently. UV aging enhanced the toxicity of PS towards E. coli, while bio-aging had an opposite weakening effect. Overall, our research verified the remarkable differences in the physicochemical properties and biotoxicity of PS induced by UV aging and bio-aging. Full article

The internal flow field and hydrodynamic properties of a photocatalytic reactor are crucial for the enhancement of degradation performance. In this study, TiO₂ films were loaded on the surface of quartz glass tubes and activated with UV-LEDs. Combining the degradation experiments with computational fluid dynamics (CFD) numerical simulations, the regulation laws of film surface area, flow field configuration, ratio of film surface area to solution volume (S/V), inlet flow rate and diameter on the reaction process were systematically evaluated. The results showed that the film surface area was positively correlated with the degradation efficiency of tetracycline hydrochloride (TCH). The degradation rate of TCH ranged between 32.15% and 64.83% in 12 equal film area flow field configurations. It was further found that the S/V value was positively correlated with the degradation efficiency only for the same flow field configuration, and the degradation rate of TCH was enhanced by 32.73% when the S/V value was increased from 0.018 m⁻¹ to 0.034 m⁻¹. In addition, as the flow rate increases, the optimal inlet diameter increases accordingly (10, 25, 40, 55, and 70 mL/min corresponded to 10, 15, 20, 20, and 25 mm, respectively). The optimum structural parameters of the reactor were determined as follows: inlet flow rate of 10 mL/min, inlet diameter of 10 mm, flow field configuration type b, S/V value of 0.034 m⁻¹, and height of 450 mm. The degradation rate of TCH under these conditions was 96.34%. The relationship between the film-reactor flow field and degradation efficiency of the photocatalytic reactor established in this study provides a reference for optimizing the design of tubular catalytic reactors. Full article

Beryl is classified as a cyclosilicate mineral, and its color is primarily determined by the type and oxidation state of trace elements. In this study, natural yellow-green beryl was used as the research subject, and heat treatment experiments were performed at various temperatures under both oxidizing and reducing atmospheres. A combination of analytical techniques, including electron probe microanalysis (EPMA), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and ultraviolet-visible spectroscopy (UV-Vis), were employed to systematically investigate the composition, structure, and chromogenic mechanisms of beryl before and after heat treatment. The experimental results indicate that heat treatment under both atmospheres can lead to the transformation of yellow-green beryl into blue, with 500–600 °C under a reducing atmosphere identified as the optimal treatment condition. With increasing temperature, beryl gradually dehydrates, resulting in a faded blue color and reduced transparency. Even after treatment at 700 °C, no significant changes in unit cell parameters were observed, and both type I and type II water were retained, indicating that the color change is not attributed to crystal structure transformation or phase transitions. The study reveals that the essential mechanism of color modification through heat treatment lies in the valence change between Fe²⁺ and Fe³⁺ occupying channel and octahedral sites. The observed color variation is attributed to changes in absorption band intensity resulting from charge transfers of O²⁻ → Fe³⁺ and Fe²⁺ → Fe³⁺. This study provides theoretical insights and technical references for the color enhancement of beryl through heat treatment. Full article

A new Schiff base, (E)-2-(((1,10-phenanthrolin-5-yl)imino)methyl)-4,6-di-tert-butylphenol (Fen-IHB), was designed to incorporate an intramolecular hydrogen bond (IHB) between the phenolic OH and the azomethine nitrogen with the goal of modulating its physicochemical and biological properties. Fen-IHB was synthesized by condensation of 5-amino-1,10-phenanthroline with 3,5-di-tert-butyl-2-hydroxybenzaldehyde and exhaustively characterized by HR-ESI-MS, FTIR, 1D/2D NMR (¹H, ¹³C, DEPT-45, HH-COSY, CH-COSY, D₂O exchange), and UV–Vis spectroscopy. Cyclic voltammetry in anhydrous CH₃CN revealed a single irreversible cathodic peak at −1.43 V (vs. Ag/Ag⁺), which is consistent with the intramolecular reductive coupling of the azomethine moiety. Density functional theory (DFT) calculations, including MEP mapping, Fukui functions, dual descriptor analysis, and Fukui potentials with dual descriptor potential, identified the exocyclic azomethine carbon as the principal nucleophilic site and the phenolic ring (hydroxyl oxygen and adjacent carbons) as the main electrophilic region. Noncovalent interaction (NCI) analysis further confirmed the strength and geometry of the intramolecular hydrogen bond (IHB). In vitro antimicrobial assays indicated that Fen-IHB was inactive against Gram-negative facultative anaerobes (Salmonella enterica serovar Typhimurium and Typhi, Escherichia coli) and strictly anaerobic Gram-positive species (Clostridioides difficile, Roseburia inulinivorans, Blautia coccoides), as any growth inhibition was indistinguishable from the DMSO control. Conversely, Fen-IHB displayed measurable activity against Gram-positive aerobes and aerotolerant anaerobes, including Bacillus subtilis, Streptococcus pyogenes, Enterococcus faecalis, Staphylococcus aureus, and Staphylococcus haemolyticus. Overall, these comprehensive characterization results confirm the distinctive chemical and electronic properties of Fen-IHB, underlining the crucial role of the intramolecular hydrogen bond and electronic descriptors in defining its reactivity profile and selective biological activity. Full article

Blueberries are in high demand worldwide because of their taste and functional components. However, the shelf life of blueberries is short owing to their perishability and rapid quality deterioration. Therefore, a sterilization technology must be developed that can extend the shelf life of blueberries while maintaining their appearance and taste. As such, we verified the effectiveness of three pre-storage sterilization treatments (UV-C, ozone gas, and ozone water) using mercury-free excimer UV lamps that did not adversely affect the environment. We then created a device that continuously treated blueberries with approximately 2.57 ppm of ozone gas to ensure sterilization during the storage period, and we verified the effectiveness of the device. We found that the pre-storage ozone treatment reduced the number of fungi on the blueberry surface without adversely affecting fruit quality. The continuous ozone treatment suppressed the decrease in anthocyanin content, further reduced the number of fungi on the fruit surface and maintained fruit appearance for a longer period compared with the control. This suggests that continuous low-concentration ozone treatment suppresses the decay and extends the storage period of blueberries intended for raw consumption. Full article

Background: Caffeine (CA) exhibits promising reparative effects against UV-induced skin aging, but the specific mechanisms, including differences in gene and metabolite regulation and the involvement of signaling pathways, are still insufficiently elucidated. Methods: This study is on the repairing capability of CA to ultraviolet (UV)-induced skin aging and explores the ferroptosis pathway through in vitro cell experiments, a UV-aged mouse skin model, and molecular docking. Results: CA enhanced the vitality and proliferation of HaCaT cells, delayed cell aging, reduced reactive oxygen species levels, increased mitochondrial membrane potential, and activated the peroxisome proliferator-activated receptor pathway, as well as repaired UVB-induced cytoskeletal disorders. Simultaneously, CA reduced other related but undesirable biological mechanisms. Moreover, multi-omics and network pharmacology studies suggested that CA mitigated aging by modulating related metabolic and ferroptosis pathways. Additionally, CA effectively reduced lipid peroxidation and intracellular ferrous ion levels and regulated the expression of key ferroptosis proteins, and its potential anti-aging effects were also confirmed through the modulation of ferroptosis pathways. In addition, molecular docking revealed strong interactions between CA and related key proteins, further supporting the potentiality of CA. Conclusions: This study elucidates the effectiveness and potential mechanism of CA to reduce the UV-induced skin aging. Full article