Search Results (55)

Hyperspectral imaging (HSI) has potential for forensic entomology, but its practical use is limited by manual region-of-interest (ROI) delineation before spectral extraction. This step is time-consuming, operator-dependent, and difficult to standardize across insect species and developmental stages. Here, we developed an automated individual-level ROI-to-spectrum workflow for HSI analysis of forensically important insects. The dataset included 63 hyperspectral images and 1868 manually annotated insect individuals, covering larvae, pupae, and adults. The proposed Hyperspectral Imaging Fully Convolutional Network (HSI-FCN) segmented insect body regions from three-band pseudo-RGB images, back-projected the predicted masks to the original HSI data cubes, generated individual-level ROIs, and extracted full-band mean spectra. On an independent test set containing 204 insect individuals, HSI-FCN achieved mean Dice and intersection over union (IoU) values of 0.9079 and 0.8328, respectively, and showed the best overall performance among representative segmentation models. All test individuals were successfully matched with their corresponding manual ROIs. Spectra extracted from automated ROIs were highly consistent with manual ROI spectra, with a mean spectral angle mapper of 3.06° and a Pearson correlation coefficient of 0.9956. These results show that the proposed workflow can replace manual ROI delineation with a reproducible preprocessing step for insect HSI analysis, supporting standardized spectral extraction and future applications in forensic entomology. Full article

For studies utilizing methods such as water color parameter inversion and algal bloom classification, abundant spectral bands and high spectral resolution are of great significance. However, for multispectral satellite sensors that are not designed for water color studies (e.g., Sentinel-2 MSI), the number of bands in the visible–near-infrared range is limited, and lacks specific spectral bands with rich spectral information. Hyperspectral reconstruction of multispectral data based on hyperspectral remote sensing reflectance ($R_{rs}$) databases and machine learning algorithms have been proven to be a feasible solution. Based on the in situ measured $R_{rs}$ data, this study constructed a large-sample hyperspectral $R_{rs}$ database covering various optical water types using two Chinese hyperspectral satellites, and compared the spectral reconstruction accuracy of six machine learning algorithms. The results show that expanding the $R_{rs}$ database for model training by integrating hyperspectral satellite data can effectively improve the reconstruction accuracy in waters of different optical types. Comparisons with in situ measured hyperspectral $R_{rs}$ indicate that the reconstructed Sentinel-2 hyperspectral data achieve high accuracy, with the Spectral Angle Mapper (SAM) less than 5° and the correlation coefficient ($r$) higher than 0.7. Furthermore, the reconstructed data can effectively restore spectral information not captured by the original multispectral data, such as the suspended sediment $R_{rs}$ peak at 580 nm and the chlorophyll $R_{rs}$ valley at 680 nm. Through spectral reconstruction, the spectral resolution of Sentinel-2 can be maximized while retaining its advantages of fast revisit capability and high spatial resolution, thereby expanding its application potential in water color remote sensing. Full article

The paper presents a method for generating a pseudo-panchromatic (PPAN) orthophotomosaic that is spectrally compatible with the multispectral (MS) orthophotomosaic, and it targets the fusion of unmanned aircraft system (UAS) RGB–MS orthophotomosaics when no true panchromatic band is available. In typical UAS imaging systems, RGB and multispectral sensors operate independently and exhibit different spectral responses and spatial resolutions, making the construction of a spectrally compatible substitution intensity a critical challenge for component substitution fusion. The conventional RGB-derived PPAN preserves spatial detail but is constrained by RGB–MS spectral incompatibility, expressed as reduced corresponding-band similarity. The proposed hybrid intensity (PPAN_E) increases the mean corresponding-band correlation from 0.842 (PPAN_A) to 0.928 (PPAN_E) and reduces the across-site mean SAM from 5.782° to 4.264°, while maintaining spatial sharpness comparable to the RGB-derived intensity. It is proposed that the PPAN_E orthophotomosaic be produced as a hybrid intensity (single band) image. Specifically, a multispectral-visible-derived intensity is resampled onto the RGB grid and statistically integrated with RGB spatial detail, followed by mild high-frequency enhancement to produce the final PPAN_E orthophotomosaic. Principal Component Analysis (PCA) fusion is applied to seven archaeological sites in Northern Greece. Spectral quality is evaluated on the MS grid using band-wise (corresponding-band) correlation and the Spectral Angle Mapper (SAM), while the spatial sharpness of the fused NIR orthophotomosaic is assessed using Tenengrad and Laplacian variance. The PPAN_E orthophotomosaic consistently increases correlations relative to PPAN_A (especially in Red Edge/NIR) and reduces the mean site-mean SAM. PPAN_C yields the lowest SAM but also the lowest spatial sharpness/clarity, whereas PPAN_E maintains spatial sharpness/clarity comparable to PPAN_A, supporting a balance between spectral consistency and spatial detail, as also confirmed through comparative evaluation against established component substitution fusion methods. The approach is reproducible and avoids full histogram matching; instead, it relies on explicitly defined linear standardization steps (mean–std normalization) and controlled spatial sharpening, and performs consistently across different scenes. Full article

The Koldar Massif in southeastern Kazakhstan is a geologically complex area with potential for porphyry copper and rare-metal mineralization. This study applies a multi-scale remote sensing approach to delineate hydrothermal alteration zones using medium-resolution ASTER imagery and very high-resolution WorldView-3 data. Image processing techniques—including false color composites (FCCs), band ratios (BRs), and the Spectral Angle Mapper (SAM)—were employed across the VNIR and SWIR bands to detect alteration minerals such as kaolinite, illite, montmorillonite, chlorite, epidote, calcite, quartz, and muscovite. These minerals correspond to argillic, propylitic, and phyllic alteration zones. While ASTER supported regional-scale mapping, WorldView-3 enabled detailed analysis at the Aidarly deposit. Validation was performed using copper occurrences, lithogeochemical anomaly contours, and ore body boundaries. The results show a strong spatial correlation between the mapped alteration zones and known mineralization patterns. Importantly, this study reports the identification of a previously undocumented hydrothermal zone north of the Aidarly deposit, detected using WorldView-3 data. This zone exhibits concentric phyllic and argillic alterations, similar to those at Aidarly, and may represent an extension of the mineralized system. Unlike earlier studies on the Aktogay deposit based on ASTER and Landsat-8, this work focuses on the Aidarly deposit and introduces higher-resolution analysis and SAM-based classification, offering improved spatial accuracy and target delineation. The proposed methodology provides a reproducible and scalable workflow for early-stage mineral exploration in underexplored regions, especially where field access is limited. These results highlight the value of high-resolution remote sensing in detecting concealed porphyry copper systems in structurally complex terrains. Full article

Remote sensing applications for marine placer deposit exploration remain limited due to the mineralogical complexity and dynamic coastal processes. This study presents the first medium- to high-level detailed multi-scale remote sensing analysis of placer deposits in the Rías Baixas, NW Spain, focusing on five beaches within the Vigo Estuary. Ten beach samples were analyzed for their heavy mineral (HM) content and spectral signatures, using bromoform separation and FieldSpec 4 spectroradiometer equipment, respectively. The spectral signatures of beach samples with a high HM content were characterized and resampled for the Sentinel-2 application, employing the Spectral Angle Mapper (SAM) algorithm. Field validation and an unmanned aerial vehicle (UAV) survey confirmed surface placer occurrences and the SAM’s results. Santa Marta Beach exhibited significant placer anomalies (up to 30% HM), correlating with low SAM values (minimum value–0.10), indicating high spectral similarity. The SAM-derived anomaly patches aligned with the field observations, demonstrating Sentinel-2’s potential for placer deposit mapping. This work highlights the application of Sentinel-2 in the exploration of placer deposits and the use of a specific spectral range of these deposits in coastal environments. These tools are non-invasive, more environmentally friendly, and sustainable, and can be extrapolated to other regions of the world with similar characteristics. Full article

The early detection of bronze disease is a significant challenge not only in conservation science but also in various industrial fields that utilize copper alloys (i.e., shipbuilding and construction). Due to the aggressive nature of this corrosion pathway, developing methods for its early detection is pivotal. The presence of copper trihydroxychlorides is the main key indicator of the ongoing autocatalytic process. Commonly used for pigment identification, reflectance imaging spectroscopy (RIS) or fiber optics reflectance spectroscopy (FORS) was recently employed for mapping atacamite distribution in extended bronze corrosion patinas. In this work, we detected the onset of bronze disease using visible–near-infrared (VIS-NIR) multispectral reflectography, which allowed for disclosing features that were poorly detectable to the naked eye. The image cube was analyzed using the spectral correlation mapper (SCM) algorithm to map the distribution of copper trihydroxychlorides. FORS and Raman spectroscopy were employed to characterize the patina composition and validate RIS data. A set of bronze samples, representative of Florentine Renaissance workshops, was specifically realized for the present study and artificially aged at different corrosion stages. Full article

Nitrogen dioxide (NO₂) is a critical air pollutant that has significant health and environmental impacts. Tropospheric NO₂ refers specifically to the vertical column density of NO₂, which is measured by satellites and serves as an indicator of anthropogenic NO₂ sources. This pollutant is frequently assessed using satellite data owing to limitations in local monitoring. This investigation employs the Spectral Angle Mapper (SAM), a geometric machine-learning model, given its advantages in simplicity and computational efficiency, and OMI satellite measurements to carry out spatially supervised classification of tropospheric NO₂ global patterns from 2005 to 2021. This study identifies four typical trends across developed urban centers, examining correlations with population growth, economic factors, and air quality policies. The results demonstrated regional variations, with a general downward trend in North America, Europe, and parts of Asia, underscoring the efficacy of stricter emission controls. However, upward trends persist in some Asian regions, reflecting varying policy implementations. This study revealed a pivotal inflection point around 2013, marking a shift in global NO₂ dynamics. Although policies have led to improved air quality in some regions, achieving absolute decoupling of economic growth from NO₂ emissions remains challenging. The COVID-19 pandemic has also exerted a significant influence, temporarily reducing emissions due to economic slowdowns. Overall, the SAM model effectively delineated NO₂ patterns and provided insights for future policy and emission control strategies. Full article

A strong and fast-moving electrical storm occurred in the Southwest Florida region overnight, from 01:00 UTC on 17 April to 07:00 UTC on 17 April 2023. Video recordings were conducted in the region at Latitude N 26.34° and Longitude W 81.79° for 5 h and 15 min, from 01:45 UTC to 07:00 UTC. The camera captured the flashes transforming from pinkish, violet, blue, and then emerald green in the sky twice: the first colored flash lasted 2.0 s, and the second one lasted 0.5 s. The characteristics of the flashes were analyzed using video images integrated with lightning flash data from the Geostationary Lightning Mapper (GLM). To gain deeper insights into the associated atmospheric conditions, the Advanced Baseline Imager (ABI) was also used to help understand the spectral anomalies. Both events had similarities: the same pattern of changing luminous colors in the optical images and the trajectory of the lightning discharges, showing clusters and horizontal distributions. Event 1 occurred mainly over the ocean and featured more intense storms, heavier rain, and denser, higher cloud-tops compared to Event 2, which occurred inland and involved dissipating storms. Moreover, the group energy detected in Event 1 was an order of magnitude higher than in Event 2. We attribute the wavelength of the recorded colored luminosity to varying atmospheric molecular concentrations, which ultimately contributed to the unique spectral line. In this study, we explore the correlation between colored flashes and specific atmospheric concentrations. Full article

Clouds and cloud shadow cover cause missing data in some images captured by the Gaofen-1 Wide Field of View (GF-1 WFV) cameras, limiting the extraction and analysis of the image information and further applications. Therefore, this study proposes a methodology to fill GF-1 WFV images using the spatial autocorrelation and improved weighting (SAIW) method. Specifically, the search window size is adaptively determined using Getis-Ord Gi* as a metric. The spatial and spectral weights of the pixels are computed using the Chebyshev distance and spectral angle mapper to better filter the suitable similar pixels. Each missing pixel is predicted using linear regression with similar pixels on the reference image and the corresponding similar pixel located in the non-missing region of the cloudy image. Simulation experiments showed that the average correlation coefficient of the proposed method in this study is 0.966 in heterogeneous areas, 0.983 in homogeneous farmland, and 0.948 in complex urban areas. It suggests that SAIW can reduce the spread of errors in the gap-filling process to significantly improve the accuracy of the filling results and can produce satisfactory qualitative and quantitative fill results in a wide range of typical land cover types and has extensive application potential. Full article

For traditional Fourier transform (FTS), its integral sampling usually meets the Spectral Modulation Transfer Function (SMTF) criterion. However, for bandpass-sampling Fourier transform spectroscopy (BPS-FTS), based on our analysis, the integral sampling condition derived from the Spectral Modulation Transfer Function (SMTF) is excessively stringent. In other words, the interval of the integral sampling time that fulfills the tolerance requirements for the reconstructed spectrum is very narrow. There are numerous integration sampling time intervals outside this range that still meet the tolerance requirements for the reconstructed spectrum. In this paper, through theoretical modeling, we propose a method based on average |SMTF| as the selection criterion for the integration sampling time. Through simulation analysis, it is evident that the intervals and range of the integral sampling time obtained via this method are more accurate, ensuring the tolerance requirements of the reconstructed spectrum. Under these intervals, when conducting integral sampling on the interferogram, the spectral deviation of the reconstructed spectrum is minimal, and the Spectral Correlation Mapper (SCM) is nearly equal to one. This indicates that compared with the SMTF criterion in traditional FTS, this method is more suitable for the characteristics of BPS-FTS. The analysis in this paper can provide theoretical and simulation support for the implementation of BPS-FTS. Full article

In hyperspectral remote sensing, achieving high spatial resolution holds paramount importance for an array of applications, such as environmental monitoring, geographic mapping, and precision agriculture. Nevertheless, conventional hyperspectral images frequently grapple with the issue of restricted spatial resolution. We apply optimized inversion methods to hyperspectral image fusion and present an innovative approach for hyperspectral image fusion which combines the Hue–Intensity–Saturation (HIS) transform, the wavelet transform, and the Trust-Region Conjugate Gradient technique. This amalgamation not only refines spatial precision but also augments spectral faithfulness, which is a pivotal aspect for applications like precise object detection and classification. In the context of our investigation, we conducted a thorough validation of our proposed HIS, Wavelet, and Trust-Region Conjugate Gradient (TRCG-HW) method for image fusion using a comprehensive suite of evaluation metrics. These metrics encompassed the Peak Signal-to-Noise Ratio (PSNR), Structural Similarity Index (SSIM), Correlation Coefficient (CC), Spectral Angle Mapper (SAM), and Error Relative Global Accuracy Score (ERGAS). The findings incontrovertibly establish TRCG-HW as the preeminent method among those considered. Our study effectively tackles the pressing predicament of low spatial resolution encountered in hyperspectral imaging. This innovative paradigm harbors the potential to revolutionize high-resolution hyperspectral data acquisition, propelling the field of hyperspectral remote sensing forward and efficiently catering to crucial application. Full article

The high intra-class variability of rock spectra is an important factor affecting classification accuracy. The discrete wavelet transform (DWT) can capture abrupt changes in the signal and obtain subtle differences between the spectra of different rocks. Taking laboratory spectra and hyperspectral data as examples, high-frequency features after DWT were used to improve the discrimination accuracy of rocks. Various decomposition levels, mother wavelet functions, and reconstruction methods were used to compare the accuracy. The intra-class variability was measured using the intra-class Spectral Angle Mapper (SAM). Our results show that the high-frequency features could improve the discrimination accuracy of laboratory spectra by 13.4% (from 46.5% to 59.9%), compared to the original spectral features. The accuracy of image spectra in two study areas increased by 8.6% (from 68.3% to 76.9%) and 7.2% (from 81.3% to 88.5%), respectively. Haar wavelets highlighted the spectral differences between different rocks. After DWT, intra-class SAM reduced and intra-class variability of rocks decreased. The Pearson correlation coefficient indicated a negative correlation between intra-class variability and overall accuracy. It suggested that improving classification accuracy by reducing intra-class variability was feasible. Though the result of lithological mapping still leaves room for improvement, this study provides a new approach to reduce intra-class variability, whether using laboratory spectra or hyperspectral data. Full article

Hematite, a ferric mineral with diagnostic features in the visible and infrared spectral range, has recently been discovered in the polar regions of the Moon by the Chandrayaan-1 Moon Mineralogy Mapper (M³). The oxygen involving the oxidization process producing lunar hematite is supposed to originate from the Earth’s upper atmosphere, and hematite with different ages may have preserved information on the oxygen evolution of the Earth’s atmosphere in the past billions of years. The discovery of lunar hematite may provide insight into the understanding of the oxidation products on the Moon and other airless bodies. In this work, we analyze hematite abundance distribution in the lunar polar regions, showing that the content of hematite on the lunar surface increases with latitude, and is positively correlated with surface water abundance. We suggest that the latitude dependence of hematite is derived from the latitude dependence of water, which indicates that water may play an essential role in the formation of hematite. The correlation between hematite and the optical maturity parameter (OMAT) was analyzed and a significant positive correlation was observed, which suggests that the hematite in the polar regions is the result of gradual and persistent oxidation reactions. In addition, based on the analysis of oxygen particles in the Earth wind, it was found that O⁺ and O₂⁺ are much more abundant, suggesting that low-energy O⁺ or O₂⁺ ions escaping from the upper atmosphere of the Earth may play a crucial role in the formation of hematite in the lunar polar regions. Full article

Change detection (CD) is one of the most important topics in remote sensing. In this paper, we propose a novel higher-order clique conditional random field model to unsupervised CD for remote sensing images (termed HOC²RF), by defining a higher-order clique potential. The clique potential, constructed based on a well-designed higher-order clique of image objects, takes the interaction between the neighboring objects in both feature and location spaces into account. HOC²RF consists of five principle steps: (1) Two difference images with complementary change information are produced by change vector analysis and using the spectral correlation mapper, which describe changes from the perspective of the vector magnitude and angle, respectively. (2) The fuzzy partition matrix of each difference image is calculated by fuzzy clustering, and the fused partition matrix is obtained by fusing the calculated partition matrices with evidence theory. (3) An object-level map is created by segmenting the difference images with an adaptive morphological reconstruction based watershed algorithm. (4) The energy function of the proposed HOC²RF, composed of unary, pairwise, and higher-order clique potentials, is computed based on the difference images, the fusion partition matrix, and the object-level map. (5) The energy function is minimized by the graph cut algorithm to achieve the binary CD map. The proposed HOC²RF CD approach combines the complementary change information extracted from the perspectives of vector magnitude and angle, and synthetically exploits the pixel-level and object-level spatial correlation of images. The main contributions of this article include: (1) proposing the idea of using the interaction between neighboring objects in both feature and location spaces to enhance the CD performance; and (2) presenting a method to construct a higher-order clique of objects, developing a higher-order clique potential function, and proposing a novel CD method HOC²RF. In the experiments on three real remote sensing images, the Kappa coefficient/overall accuracy values of the proposed HOC²RF are 0.9655/0.9967, 0.9518/0.9910, and 0.7845/0.9651, respectively, which are superior to some state-of-the-art CD methods. The experimental results confirm the effectiveness of the proposed method. Full article

The leaf chlorophyll content (LCC) is a vital parameter that indicates plant production, stress, and nutrient availability. It is critically needed for precision farming. There are several multispectral images available freely, but their applicability is restricted due to their low spectral resolution, whereas hyperspectral images which have high spectral resolution are very limited in availability. In this work, hyperspectral imagery (AVIRIS-NG) is simulated using a multispectral image (Sentinel-2) and a spectral reconstruction method, namely, the universal pattern decomposition method (UPDM). UPDM is a linear unmixing technique, which assumes that every pixel of an image can be decomposed as a linear composition of different classes present in that pixel. The simulated AVIRIS-NG was very similar to the original image, and its applicability in estimating LCC was further verified by using the ground based measurements, which showed a good correlation value (R = 0.65). The simulated image was further classified using a spectral angle mapper (SAM), and an accuracy of 87.4% was obtained, moreover a receiver operating characteristic (ROC) curve for the classifier was also plotted, and the area under the curve (AUC) was calculated with values greater than 0.9. The obtained results suggest that simulated AVIRIS-NG is quite useful and could be used for vegetation parameter retrieval. Full article