Search Results (9)

Disruption of the intestinal barrier is a hallmark of inflammatory bowel disease (IBD) and drives both epithelial injury and neutrophil-mediated inflammation, yet rapid, multiplexed assessment of these processes remains an unmet clinical need. Intestinal fatty acid binding protein (iFABP) and fecal calprotectin (FC) provide complementary insights into barrier integrity and mucosal inflammation, but conventional ELISA-based assays are time-consuming, low-throughput, and require large sample volumes. Here, we introduce a dual electrochemical sandwich immunosensor enabling simultaneous quantification of iFABP and FC on screen-printed dual carbon electrodes (SPdCEs). Capture antibodies were immobilized via electrografting of p-aminobenzoic acid diazonium salt, while a V₂O₅/MWCNTs-HRP–streptavidin nanocomposite amplified the electrocatalytic reduction in hydrogen peroxide, enhancing sensitivity. The platform achieved detection limits of 0.01 pg mL⁻¹ (iFABP) and 1 pg mL⁻¹ (FC) with a total assay time of 1 h 20 min and sample volume of just 5 μL, outperforming conventional ELISA in speed and efficiency. High repeatability, reproducibility, and accurate recovery in enriched fecal samples confirmed analytical robustness. By integrating multiplexed detection, nanostructured signal amplification, and robust electrode engineering, this immunosensor provides a rapid, sensitive, and low-volume platform for point-of-care and decentralized monitoring of IBD, enabling timely clinical decision-making and longitudinal patient management. Full article

Background: Medicago ruthenica, a perennial legume forage valuable for ecological restoration and improved breeding, suffers significant harvest losses due to pod shattering. Pod shattering is a trait not only linked to not only pod ventral suture, but also pericarp properties. In this study, we aimed to (1) elucidate the role of pericarp in explosive pod shattering by comparing shattering-susceptible (SPD) and shattering-resistant (RPD) M. ruthenica genotypes, and (2) identify key regulatory genes and pathways underlying this mechanism. Methods: We conducted comparative analyses of pericarp anatomy and physiological traits (pericarp components such as water content, cellulose, hemicellulose, pectin, and lignin; and the activities of enzymes such as cellulose synthase A (CesA), phenylalanine ammonia-lyase (PAL), 4-coumarate: CoA ligase (4CL), cinnamyl alcohol dehydrogenase (CAD), and peroxidase (POD) in SPD and RPD pods). Transcriptome of pod pericarps identified differentially expressed genes (DEGs) for the selection of candidates functional genes. Promoter analysis was performed on candidate functional genes to identify specific regulated factors. The functional role of auxin signaling was validated through exogenous auxin application and the assessment of pod shattering rates and gene expression. Results: SPD pod pericarps exhibited significantly higher lignification of endocarp, lignin, cellulose, hemicellulose and pectin content, but lower water content than RPD. Principal component analysis identified that lignin contributes the highest loading value (0.727) contributor to pod shattering. The activities of five cell wall biosynthesis enzymes were higher in SPD pod pericarps than RPD. Transcriptome analysis identified more than 3419 DEGs in SPD pericarps. KEGG enrichment highlighted “phenylpropanoid biosynthesis” as the most significant pathway. A total of 57 lignin-biosynthesis-related DEGs were upregulated in SPD, including 15 PODs. Promoters of 11 POD genes contained MYB-binding motifs and 8 contained auxin-responsive elements, a total of 76 MYB transcription factors (mostly upregulated) and 9 auxin biosynthesis genes (mostly downregulated) were differentially expressed in SPD. Exogenous auxin application significantly reduced SPD pod shattering to 23.6% and concurrently downregulated PODs expression. Conclusions: This study establishes that enhanced lignification within the pericarp endocarp by the upregulation of lignin biosynthetic genes (particularly PODs), coupled with upregulation by MYB transcription factors and downregulation by auxin, is a core mechanism of explosive pod shattering in M. ruthenica. The identified DEGs, especially MYBs, PODs, and auxin pathway genes, provide gene information for breeding shattering-resistant M. ruthenica varieties through molecular design or marker-assisted selection. Full article

This paper constructs a modified hypothesis extraction method (MHEM)–structural decomposition analysis (SDA)–structural path decomposition (SPD) analytical framework and employs the 2018–2022 Chinese input–output tables to discuss sectoral consumption correlations, driving forces of consumption, and the transmission paths of carbon energy (CE), oil and gas energy (OGE) and electric energy (EE). The results of the study indicate that energy-exporting sectors are primarily energy production or conversion industries, while energy-importing sectors are mainly in the construction sector. China’s energy consumption has shown consistent year-on-year growth, with the primary driving force being the intensity of energy consumption and the secondary factor being per capita demand. The consumption of all three types of energy is primarily directed toward domestic consumption and capital formation. Regarding energy consumption transmission paths, the first-order path with the largest overall impact on CE is “electricity, gas, and water supply sector → domestic consumption”, while higher-order paths are primarily subpaths of “electricity, gas, and water supply sector → capital formation”. For OGE, the main supply and transfer path is “coke, refined petroleum, and nuclear fuel sector → domestic consumption”, along with its subpaths. In contrast, EE transmission is more balanced, with a high demand for electricity across all sectors. Full article

Enhancing the pH-independence and controlling the magnitude of electroosmotic flow (EOF) are critical for highly efficient and reproducible capillary electrophoresis (CE) separations. Herein, we present a novel capillary modification method utilizing sulfonated periodate-induced polydopamine (SPD) coating to achieve pH-independent and highly reproducible cathodic EOF in CE. The SPD-coated capillaries were obtained through post-sulfonation treatment of periodate-induced PDA (PDA-SP) coatings adhered on the capillary inner surface. The successful immobilization of the SPD coating and the substantial grafting of sulfonic acid groups were confirmed by a series of characterization techniques. The excellent capability of PDA-SP@capillary in masking silanol groups and maintaining a highly robust EOF mobility was verified. Additionally, the parameters of sulfonation affecting the EOF mobilities were thoroughly examined. The obtained optimum SPD-coated column offered the anticipated highly pH-independent and high-strength cathodic EOF, which is essential for enhancing the CE separation performance and improving analysis efficiency. Consequently, the developed SPD-coated capillaries enabled successful high-efficiency separation of aromatic acids and nucleosides and rapid cyclodextrin-based chiral analysis of racemic drugs. Moreover, the SPD-coated columns exhibited a long lifetime and demonstrated good intra-day, inter-day, and column-to-column repeatability. Full article

Magnesium-based alloys hold potential for medical applications, but face challenges like rapid bioresorption and limited mechanical strength during early bone healing. In our study, we present a novel Mg–Zn–Zr–Ce alloy with low cerium content (up to 0.1 wt.% Ce) processed using two severe plastic deformation (SPD) techniques. Through an innovative combination of multiaxial forging and multipass rolling, we have achieved a fine-grained structure with an average grain size of the primary α-Mg phase of 1.0 μm. This refined microstructure exhibits improved mechanical properties, including a substantial increase in yield strength (σ_YS) from 130 to 240 MPa, while preserving ductility. The alloy’s composition includes α-Mg grains, cerium and zinc hydrides, and intermetallic phases with cerium and zinc elements. Tensile testing of the fine-grained alloy demonstrates an enhancement in yield strength (σ_YS) to 250 MPa, marking a 2.8-fold improvement over the conventional state (σ_YS = 90 MPa), with a modest 2-fold reduction in ductility. Crucially, electrochemical tests conducted in physiological solutions highlight substantial advancements in corrosion resistance. The corrosion current was reduced from 14 to 2 μA/cm², while polarization resistance decreased from 3.1 to 8.1 kΩ∙cm², underlining the alloy’s enhanced resistance to biodegradation. Our results show that the novel Mg–Zn–Zr–Ce alloy, after combined SPD, demonstrates mitigated bioresorption and enhanced mechanical properties. Our findings highlight the fact that the introduction of this innovative alloy and the application of SPD represent significant steps towards addressing the limitations of magnesium-based alloys for medical implants, offering potential improvements in safety and effectiveness. Full article

Silymarin (Sm) and dopamine (DA) act synergistically as potential antioxidants, mediating many physiological and biochemical processes. As a first report, we investigated the synergistic effect of Sm and DA in mitigating cadmium stress in Phaseolus vulgaris plants. Three experiments were conducted simultaneously using 40 cm diameter pots to elucidate how Sm and DA affect cadmium tolerance traits at morphological, physiological, and biochemical levels. Cadmium stress triggered a marked reduction in growth, productivity, and physio-biochemical characteristics of common bean plants compared to unstressed plants. Seed priming (SP) and foliar spraying (FS) with silymarin (Sm) or dopamine (DA) ((DA (SP) + Sm (FS) and Sm (SP) + DA (FS)) ameliorated the damaging effects of cadmium stress. Sm seed priming + DA foliar spraying (Sm (SP) + DA (FS)) was more efficient. The treated stressed common bean plants showed greater tolerance to cadmium stress by diminishing oxidative stress biomarkers (i.e., O₂^•−, H₂O₂, and MDA) levels through enhanced enzymatic (SOD, CAT, POD, APX) and non-enzymatic (ascorbic acid, glutathione, α-tocopherol, choline, phenolics, flavonoids) antioxidant activities and osmoprotectants (proline, glycine betaine, and soluble sugars) contents, as well as through improved photosynthetic efficiency (total chlorophyll and carotenoids contents, photochemical activity, and efficiencies of carboxylation (iCE) and PSII (Fv/Fm)), polyamines (Put, Spd, and Spm), and polyamine metabolic enzymes (ADC and ODC) accumulation. These findings signify that Sm and DA have remarkable anti-stress effects, which can help regulate plant self-defense systems, reflecting satisfactory plant growth and productivity. Thus, realizing the synergistic effect of Sm and DA in cadmium tolerance confers potential new capabilities for these compounds to function in sustainable agriculture. Full article

Spectral power distribution (SPD) is an essential element that has considerable implications on circadian energy and the perception of lit environments. The present study assessed the potential influences of SPD on energy consumption (i.e., considering circadian energy), visual comfort, work performance and mood. Two lighting conditions based on light-emitting diode (LED) and organic light-emitting diode (OLED) were used as proxies for SPDs of different spectral content: dominant peak wavelength of 455 nm (LED) and 618 nm (OLED). Using measured photometric values, the circadian light (CL), melatonin suppression (MS), and circadian efficacy (CE) of the two lighting sources were estimated via a circadian-phototransduction model and compared. Additionally, twenty-six participants were asked to evaluate the said lit environments subjectively in terms of visual comfort and self-reported work performance. Regarding circadian lighting and the associated energy implications, the LED light source induced higher biological actions with relatively less energy than the OLED light source. For visual comfort, OLED lighting-based conditions were preferred to LED lighting-based conditions, while the opposite was true when considering work performance and mood. The current study adds to the on-going debate regarding human-centric lighting, particularly considering the role of SPD in energy-efficient and circadian lighting practices. Full article

Mucopolysaccharidosis IIIA (MPS IIIA) is a lysosomal storage disease with significant neurological and skeletal pathologies. Respiratory dysfunction is a secondary pathology contributing to mortality in MPS IIIA patients. Pulmonary surfactant is crucial to optimal lung function and has not been investigated in MPS IIIA. We measured heparan sulphate (HS), lipids and surfactant proteins (SP) in pulmonary tissue and bronchoalveolar lavage fluid (BALF), and surfactant activity in healthy and diseased mice (20 weeks of age). Heparan sulphate, ganglioside GM3 and bis(monoacylglycero)phosphate (BMP) were increased in MPS IIIA lung tissue. There was an increase in HS and a decrease in BMP and cholesteryl esters (CE) in MPS IIIA BALF. Phospholipid composition remained unchanged, but BALF total phospholipids were reduced (49.70%) in MPS IIIA. There was a reduction in SP-A, -C and -D mRNA, SP-D protein in tissue and SP-A, -C and -D protein in BALF of MPS IIIA mice. Captive bubble surfactometry showed an increase in minimum and maximum surface tension and percent surface area compression, as well as a higher compressibility and hysteresis in MPS IIIA surfactant upon dynamic cycling. Collectively these biochemical and biophysical changes in alveolar surfactant are likely to be detrimental to lung function in MPS IIIA. Full article

In this work, a novel magnetic beads (MBs)-based immunosensing approach for the rapid and simultaneous determination of the main peanut allergenic proteins (Ara h 1 and Ara h 2) is reported. It involves the use of sandwich-type immunoassays using selective capture and detector antibodies and carboxylic acid-modified magnetic beads (HOOC-MBs). Amperometric detection at −0.20 V was performed using dual screen-printed carbon electrodes (SPdCEs) and the H₂O₂/hydroquinone (HQ) system. This methodology exhibits high sensitivity and selectivity for the target proteins providing detection limits of 18.0 and 0.07 ng/mL for Ara h 1 and Ara h 2, respectively, with an assay time of only 2 h. The usefulness of the approach was evaluated by detecting the endogenous content of both allergenic proteins in different food extracts as well as trace amounts of peanut allergen (0.0001% or 1.0 mg/kg) in wheat flour spiked samples. The developed platform provides better Low detection limits (LODs) in shorter assay times than those claimed for the allergen specific commercial ELISA kits using the same immunoreagents and quantitative information on individual food allergen levels. Moreover, the flexibility of the methodology makes it readily translate to the detection of other food-allergens. Full article