Search Results (57)

Magnetic nanoparticles (MNPs), especially iron oxide (Fe₃O₄), display distinctive superparamagnetic characteristics and elevated surface-area-to-volume ratios, facilitating improved physicochemical interactions with solutes and pollutants. These characteristics make MNPs strong contenders for use in water treatment applications. This research investigates the application of iron oxide MNPs synthesized via co-precipitation as innovative draw solutes in forward osmosis (FO) for treating synthetic produced water (SPW). The FO membrane underwent surface modification with sulfobetaine methacrylate (SBMA), a zwitterionic polymer, to increase hydrophilicity, minimize fouling, and elevate water flux. The SBMA functional groups aid in electrostatic repulsion of organic and inorganic contaminants, simultaneously encouraging robust hydration layers that improve water permeability. This adjustment is vital for sustaining consistent flux performance while functioning with MNP-based draw solutions. Material analysis through thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR) verified the MNPs’ thermal stability, consistent morphology, and modified surface chemistry. The FO experiments showed a distinct relationship between MNP concentration and osmotic efficiency. At an MNP dosage of 10 g/L, the peak real-time flux was observed at around 3.5–4.0 L/m²·h. After magnetic regeneration, 7.8 g of retrieved MNPs generated a steady flow of ~2.8 L/m²·h, whereas a subsequent regeneration (4.06 g) resulted in ~1.5 L/m²·h, demonstrating partial preservation of osmotic driving capability. Post-FO draw solutions, after filtration, exhibited total dissolved solids (TDS) measurements that varied from 2.5 mg/L (0 g/L MNP) to 227.1 mg/L (10 g/L MNP), further validating the effective dispersion and solute contribution of MNPs. The TDS of regenerated MNP solutions stayed similar to that of their fresh versions, indicating minimal loss of solute activity during the recycling process. The combined synergistic application of SBMA-modified FO membranes and regenerable MNP draw solutes showcases an effective and sustainable method for treating produced water, providing excellent water recovery, consistent operational stability, and opportunities for cyclic reuse. Full article

This study explores the valorization of agro-industrial by-products—riceberry broken rice (RBR) and soybean meal (SBM)—as cost-effective substrates for enhancing exopolysaccharide (EPS) production by Bacillus tequilensis PS21. Eight Bacillus strains were screened, and B. tequilensis PS21 demonstrated the highest EPS yield (2.54 g/100 mL DW). The EPS displayed a strong antioxidant capacity with 65.5% DPPH and 80.5% hydroxyl radical scavenging, and a FRAP value of 6.51 mg Fe²⁺/g DW. Antimicrobial testing showed inhibition zones up to 10.07 mm against Streptococcus agalactiae and 7.83 mm against Staphylococcus aureus. Optimization using central composite design (CCD) and the response surface methodology (RSM) revealed the best production at 5% (w/v) RBR, 3% (w/v) SBM, pH 6.66, and 39.51 °C, yielding 39.82 g/L EPS. This EPS is a moderate-molecular-weight (11,282 Da) homopolysaccharide with glucose monomers. X-ray diffraction (XRD) showed an amorphous pattern, favorable for solubility in biological applications. Thermogravimetric analysis (TGA) demonstrated thermal stability up to ~250 °C, supporting its suitability for high-temperature processing. EPS also exhibited anticancer activity with IC₅₀ values of 226.60 µg/mL (MCF-7) and 224.30 µg/mL (HeLa) at 72 h, reduced colony formation, inhibited cell migration, and demonstrated anti-tyrosinase, anti-collagenase, and anti-elastase effects. This study demonstrates the successful valorization of agro-industrial by-products—RBR and SBM—for the high-yield production of multifunctional EPS with potent antioxidant, antimicrobial, and anticancer properties. The findings highlight the sustainable potential of these low-cost substrates in supporting the development of green and value-added bioproducts, with promising utilizations across the food, pharmaceutical, and cosmetic sectors. Full article

To address the growing demand for environmentally friendly flexible sensors, here, a composite hydrogel of nanocellulose (NC) and polyvinyl alcohol (PVA) was designed and fabricated using Camellia oleifera shells as a sustainable alternative to petroleum-based raw materials. Firstly, NC was extracted from Camellia oleifera shells and modified with 2-chloropropyl chloride to obtain a nanocellulose-based initiator (Init-NC) for atomic transfer radical polymerization (ATRP). Subsequently, sulfonyl betaine methacrylate (SBMA) was polymerized by Init-NC initiating to yield zwitterion-functionalized nanocellulose (NC-PSBMA). Finally, the NC-PSBMA/PVA hydrogel was fabricated by blending NC-PSBMA with PVA. A Fourier transform infrared spectrometer (FT-IR), proton nuclear magnetic resonance spectrometer (¹H-NMR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), universal mechanical testing machine, and digital source-meter were used to characterize the chemical structure, surface microstructure, and sensing performance. The results indicated that: (1) FT-IR and ¹H NMR confirmed the successful synthesis of NC-PSBMA; (2) SEM, TEM, and alternating current (AC) impedance spectroscopy verified that the NC-PSBMA/PVA hydrogel exhibits a uniform porous structure (pore diameter was 1.1737 μm), resulting in significantly better porosity (15.75%) and ionic conductivity (2.652 S·m⁻¹) compared to the pure PVA hydrogel; and (3) mechanical testing combined with source meter testing showed that the tensile strength of the composite hydrogel increased by 6.4 times compared to the pure PVA hydrogel; meanwhile, it showed a high sensitivity (GF = 1.40, strain range 0–5%; GF = 1.67, strain range 5–20%) and rapid response time (<0.05 s). This study presents a novel approach to developing bio-based, flexible sensing materials. Full article

Blind Interference Alignment (BIA) and Sparse Code Multiple Access (SCMA) offer the potential for massive connectivity but face limitations. Our recently proposed Sparsecode-and-BIA-based Multiple Access (SBMA) scheme synergizes their strengths, promising enhanced performance. SBMA leverages flexible user grouping (UG) strategies to effectively manage its unique combination of sparse code constraints and interference alignment requirements, thereby facilitating the fulfillment of diverse Quality of Service (QoS) demands. However, realizing SBMA’s full potential requires efficient joint resource allocation (RA), user scheduling (US), and user grouping (UG). The inherent coupling of these factors within the SBMA framework complicates this task significantly, rendering RA/US solutions designed purely for SCMA or BIA insufficient. This paper addresses this critical open issue. We first formulate the joint RA, US, and UG problems specifically for SBMA systems as an integer optimization task, aiming to maximize the number of users meeting QoS requirements. To tackle this NP-hard problem, we propose an effective algorithm based on Particle Swarm Optimization (PSO), featuring a carefully designed update function tailored specifically for the joint US and UG decisions required in SBMA. Comprehensive simulations demonstrate show that the proposed algorithm significantly outperforms the random-based scheme. Under certain conditions, it serves approximately 280% more users who meet their QoS requirements in high-SNR scenarios. Full article

The development of eco-friendly surfactants is pivotal for enhanced oil recovery (EOR). In this study, a novel lignin-derived zwitterionic surfactant (DMS) was synthesized through a two-step chemical process involving esterification and free radical polymerization, utilizing renewable alkali lignin, maleic anhydride, dimethylamino propyl methacrylamide (DMAPMA), and sulfobetaine methacrylate (SBMA) as precursors. Comprehensive characterization via ¹H NMR, FTIR, and XPS validated the successful integration of amphiphilic functionalities. Hydrophilic–lipophilic balance (HLB) analysis showed a strong tendency to form stable oil-in-water (O/W) emulsions. The experimental results showed a remarkable 91.6% viscosity reduction in Xinjiang heavy crude oil emulsions at an optimum dosage of 1000 mg/L. Notably, DMS retained an 84.8% viscosity reduction efficiency under hypersaline conditions (total dissolved solids, TDS = 200,460 mg/L), demonstrating exceptional salt tolerance. Mechanistic insights derived from zeta potential measurements and molecular dynamics simulations revealed dual functionalities: interfacial modification by DMS-induced O/W phase inversion and electrostatic repulsion (zeta potential: −30.89 mV) stabilized the emulsion while disrupting π–π interactions between asphaltenes and resins, thereby mitigating macromolecular aggregation in the oil phase. As a green, bio-based viscosity suppressor, DMS exhibits significant potential for heavy oil recovery in high-salinity reservoirs, addressing the persistent challenge of salinity-induced inefficacy in conventional chemical solutions and offering a sustainable pathway for enhanced oil recovery. Full article

Introduction: Spinal and bulbar muscular atrophy (SBMA) is an adult-onset, X-linked, progressive neuromuscular disease caused by abnormal CAG trinucleotide expansion in the androgen receptor gene. Patients with SBMA report difficulty with falls on self-reported activities of daily living scales. To our knowledge, no study has examined the relationship between falls and common clinical measures of strength, balance, mobility, and disease biomarkers. We performed a cross-sectional analysis of an SBMA cohort. Objectives: The objectives of this study are as follows: (1) compare demographics, clinical measures, and biomarkers between patients who did and did not fall; (2) determine which measures best discriminate fallers from non-fallers; and (3) identify cutoff scores to detect patients with a higher fall risk. Design: Cross-sectional analysis was used. Outcome Measures: Disease biomarkers included blood serum creatinine, and clinical measures included the Timed Up and Go (TUG), the Adult Myopathy Assessment Tool (AMAT), and posturography, including the Modified Clinical Test of Sensory Interaction on Balance and the Motor Control Test. The Maximal Voluntary Isometric Contractions (MVICs) of four lower extremity muscles were captured via fixed-frame dynamometry. Results: We identified three clinical measures that help detect fall risk in people with SBMA. A post hoc receiver operating characteristic curve analysis helped identify cut scores for each test. Impairments of mobility (TUG > 8 s), muscle endurance (AMAT endurance subscale < 14), and muscle strength (ankle plantar flexion MVIC < 45% of predicted) were different between fallers and non-fallers, via independent t-tests. Conclusions: These three clinical tests can help detect fall risk that may help clinicians implement gait aid use or other fall prevention strategies before catastrophic falls occur. Full article

Introduction: Spinal and bulbar muscular atrophy (SBMA) is an X-linked neuromuscular disorder characterized by progressive muscle weakness, along with muscle cramps, tremors, and sensory neuropathy. Previous research has shown that patients with SBMA have difficulty with dynamic balance and sensory postural control during quiet stance. There have been no reports on automatic postural reactions in SBMA. Objectives: In this study, we aimed (1) to augment previous findings of sensory postural control, (2) to investigate automatic postural reactions in SBMA, and (3) to explore the relationship between strength and balance. Design: A cross-sectional design was used for the analysis. Participants: The participants were fifty male individuals with a confirmed diagnosis of SBMA. Outcome Measures: Balance testing included the NeuroCom modified Clinical Test of Sensory Interaction on Balance (mCTSIB), which measures sway velocity during quiet stance, and the NeuroCom Motor Control Test (MCT), which measures the latency and strength of postural reactions following sudden perturbations. Strength testing included maximal voluntary isometric contractions measured via fixed-frame dynamometry. Results: Forty-seven out of fifty participants were able to complete the mCTSIB test, but only thirty-eight completed the MCT test. Patients who were unable to complete the MCT were significantly weaker in all lower extremity muscles compared to those who were able to complete testing. Compared to normative data, participants showed significantly higher sway velocity during quiet stance across all conditions of the mCTSIB, except when standing on foam with eyes open. They also exhibited significantly slower postural reactions in response to sudden shifts of the force plate on the MCT. Plantarflexor weakness was significantly correlated with poor postural control on the mCTSIB and MCT. Conclusions: This study confirms previously reported abnormalities of sensory postural control in SBMA and highlights patients’ heavy reliance on visual inputs for postural control. Additionally, this study shows that automatic postural corrections are slower than normal in SBMA and provides a unique approach for measuring the combined sensory and motor components of the disease. Both the sensory and automatic balance abnormalities were found to be associated with plantarflexor weakness and may contribute to a higher risk of falls under challenging situations. Therefore, addressing this weakness may be an important step toward fall prevention in this population. Full article

Lithium (Li) metal’s exceptional low electrode potential and high specific capacity for next-gen energy storage devices make it a top contender. However, the unregulated and unpredictable proliferation of Li dendrites and the instability of interfaces during repeated Li plating and stripping cycles pose significant challenges to the widespread commercialization of Li metal anodes. We introduce the creation of a hydrogen bond network solid electrolyte interphase (SEI) film that integrates zwitterionic groups, designed to facilitate the stability and longevity of lithium metal batteries (LMBs). Here, we design a PVA/P(SBMA-MBA) hydrogen bond network film (PSM) as an artificial SEI, integrating zwitterions and polyvinyl alcohol (PVA) to synergistically regulate Li⁺ flux. The distinctive zwitterionic effect in the network amplifies the SEI film’s ionic conductivity to 1.14 × 10⁻⁴ S cm⁻¹ and attains an impressive Li⁺ ion transfer number of 0.84. In situ Raman spectroscopy reveals dynamic hydrogen bond reconfiguration under strain, endowing the SEI with self-adaptive mechanical robustness. These properties facilitate a homogeneous Li flux and exceptionally suppress dendritic growth. The advanced Li metal anode may endure over 1200 h at 1 mA cm⁻² current density and 1 mAh cm⁻² area capacity in a Li|Li symmetric battery. And in full cells paired with LiFePO₄ cathodes, 93.8% capacity retention is reached after 300 cycles at 1C. Consequently, this work provides a universal strategy for designing dynamic interphases through molecular dipole engineering, paving the way for safe and durable lithium metal batteries. Full article

Zwitterionic polymer hydrogels have great application prospects in wearable electronic devices due to their antifouling and excellent biocompatibility. However, its strong hydrophilicity often leads to easy swelling and poor mechanical properties. In this study, aramid nanofiber (ANF)-reinforced zwitterionic ion hydrogels were synthesized by the one-step free radical polymerization of N-acryloyl glycinamide (NAGA), N-[Tris (hydroxymethyl) methyl] acrylamide (THMA) and sulfobetaine methacrylate (SBMA) monomers in the presence of ANFs. A large number of hydrogen bonds were formed between the amide groups of the ANFs and the amide groups of the NAGA units/the hydroxyl groups of the THMA units/the sulfonic groups of the SBMA units, which improved the internal interface force of the hydrogel. The obtained ANF-reinforced hydrogel had an anti-swelling property, and its swelling ratio and tensile strength were 25% and 170% of those of the hydrogel without the addition of ANFs. By introducing lithium chloride as an electrolyte to improve its ion conductivity and subsequently assembling it into strain sensors, it exhibited a high sensitivity (GF = 1.12), short response and recovery times (100 ms and 150 ms), and excellent cycling stability. This work provides a feasible strategy for anti-swelling wearable strain sensors. Full article

Background: The clinical profiles of MNDs are dominated by inexorable motor decline, but subclinical proprioceptive, nociceptive and somatosensory deficits may also exacerbate mobility, dexterity, and bulbar function. While extra-motor pathology and frontotemporal involvement are widely recognised in motor neuron diseases (MNDs), reports of sensory involvement are conflicting. The potential contribution of sensory deficits to clinical disability is not firmly established and the spectrum of sensory manifestations is poorly characterised. Methods: A systematic review was conducted to examine the clinical, neuroimaging, electrophysiology and neuropathology evidence for sensory dysfunction in MND phenotypes. Results: In ALS, paraesthesia, pain, proprioceptive deficits and taste alterations are sporadically reported and there is also compelling electrophysiological, histological and imaging evidence of sensory network alterations. Gait impairment, impaired dexterity, and poor balance in ALS are likely to be multifactorial, with extrapyramidal, cerebellar, proprioceptive and vestibular deficits at play. Human imaging studies and animal models also confirm dorsal column-medial lemniscus pathway involvement as part of the disease process. Sensory symptoms are relatively common in spinal and bulbar muscular atrophy (SBMA) and Hereditary Spastic Paraplegia (HSP), but are inconsistently reported in primary lateral sclerosis (PLS) and in post-poliomyelitis syndrome (PPS). Conclusions: Establishing the prevalence and nature of sensory dysfunction across the spectrum of MNDs has a dual clinical and academic relevance. From a clinical perspective, subtle sensory deficits are likely to impact the disability profile and care needs of patients with MND. From an academic standpoint, sensory networks may be ideally suited to evaluate propagation patterns and the involvement of subcortical grey matter structures. Our review suggests that sensory dysfunction is an important albeit under-recognised facet of MND. Full article

A cascade control structure (CCS) is still the most commonly used control scheme in variable speed control (VSC) electrical drives with alternating current (AC) motors. Several tuning methods are used to select the coefficients of controllers applied in CCS. These approaches can be divided into analytical, empirical, and heuristic ones. Regardless of the tuning method used, there is still a question of whether the CCS is tuned optimally in terms of considered performance indicators to provide high-performance behavior of the electrical drive. Recently, artificial intelligence-based methods, e.g., swarm-based metaheuristic algorithms (SBMAs), have been extensively examined in this field, giving promising results. Moreover, the intensive development of artificial intelligence (AI) assistants based on large language models (LLMs) supporting decision-making processes is observed. Therefore, it is worth examining the ability of LLMs to tune the CCS in the VSC electrical drive. This paper investigates tuning methods for the cascade control structure equipped with PI-type current and angular velocity controllers for PMSM drive. Sets of CCS parameters from electrical engineers with different experiences are compared with reference solutions obtained by using the SBMA approach and LLMs. The novel LLM-based Tuning Assistant (TA) is developed and trained to improve the quality of responses. Obtained results are assessed regarding the drive performance, number of attempts, and time required to accomplish the considered task. A quantitative analysis of LLM-based solutions is also presented. The results indicate that AI-based tuning methods and the properly trained Tuning Assistant can significantly improve the performance of VSC electrical drives, while state-of-the-art LLMs do not guarantee high-performance drive operation. Full article

The androgen receptor (AR) is critical for mediating the effects of androgens. The polymorphic CAGn locus in exon 1 of the AR gene is associated with several diseases, including spinal and bulbar muscular atrophy (SBMA), prostate cancer, and male infertility. This study evaluated the CAGn locus in 9000 infertile Russian men and 286 fertile men (control group). The CAGn locus was analyzed using the amplified fragment length polymorphism method. In the infertile cohort, the number of CAG repeats ranged from 6 to 46, with a unimodal distribution. The number of CAG repeats in infertile and fertile men was 22.15 ± 0.93 and 22.02 ± 1.36, respectively. In infertile men, variants with 16 to 29 repeats were present in 97% of the alleles. A complete mutation (≥42 CAG repeats) was found in three patients, while three others had 39-41 repeats. The incidence of SBMA was 1:3000 infertile men. Significant differences (p < 0.05) were observed between infertile and fertile men in alleles with 21, 24 and 25 repeats. This study revealed certain differences in the CAGn polymorphic locus of the AR gene in Russian infertile and fertile men and determined the frequency of SBMA in infertile patients. Full article

In this study, we first fabricated a crosslinked hydrogel coating by polymerizing methacryloyloxyethyl sulfonyl betaine and acrylamide (SBMA) on the magnesium (Mg) alloy surface employing ultraviolet (UV) polymerization. Bivalirudin and CO-releasing molecules (CORM-401) were further grafted onto the hydrogel coating surface to acquire a multifunctional biocompatible coating capable of releasing CO to augment corrosion-resisting properties and biocompatibility. The findings verified that the bioactive hydrogel coating significantly increased the corrosion potential and reduced the corrosion current, thereby improving the anticorrosion performance. Meanwhile, owing to the excellent hydrophilicity, the antifouling performance of the hydrogel coating, and the excellent anticoagulant performance of bivalirudin, the hydrogel coating significantly reduced the fibrinogen adsorption, platelet adhesion and activation, and hemolysis occurrence, displaying excellent ability to inhibit blood clotting. Moreover, endothelial cell (EC) experimental results demonstrated that the hydrogel coating could significantly promote EC growth, displaying great potential to induce re-endothelialization after implantation. Specifically, in the presence of cysteine capable of catalyzing CO release, the anticoagulant performance and ability to promote EC growth were further improved significantly. Therefore, the study offers an effective strategy to prepare a hydrogel coating capable of releasing CO to improve the corrosion-resisting performance and biocompatibility of Mg alloys, which is anticipated to be applied in the surface modification of Mg alloy intravascular stents. Full article

Background/Objectives: The primary life-threatening complication in spinal–bulbar muscular atrophy (SBMA) is ventilatory failure. The present study analyzes the longitudinal patterns of respiratory function tests over a follow-up of 11 years. Methods: We collected data from 9 genetically confirmed SBMA patients. Spirometric measurements [maximum inspiratory pressure (MIP), maximum expiratory pressure (MEP), and forced vital capacity (FVC)], serum biochemical indices and SBMA functional rating scale (SBMAFRS) were collected every 6 months for 11 years. An average time curve was utilized to assess the changes in both pulmonary tests and serum biochemical indices of the patients. One-way repeated-measures ANOVA was applied to assess statistical differences. The Spearman’s rank correlation coefficient was utilized to evaluate the correlations between the respiratory function tests and serum biochemical and clinical indices. Results: A progressive decrease was observed in the respiratory function tests; the slope of the linear regression was significantly non-zero (p < 0.0001) for all three time curves. A major decrease was observed for MEP (52%) and MIP (42%), while this was minor for FVC (25%). SBMAFRS score correlated with FVC (r = 0.27), MIP (r = 0.53) and MEP (r = 0.51). MIP and MEP correlated with creatine phosphokinase (r = 0.3, r = 0.25, respectively) and MIP with creatinine levels (r = 0.31). Conclusions: This longitudinal study shows a progressive decline of spirometric data throughout life in SBMA patients. The decline appears to be related to clinical deterioration and muscle denervation. Spirometric measures relative to maximal strength of the respiratory muscles (MIP and MEP) may have a better predictive value for pulmonary and muscular decline than FVC. Full article

Antisense oligonucleotides (ASOs) are short oligodeoxynucleotides designed to bind to specific regions of target mRNA. ASOs can modulate pre-mRNA splicing, increase levels of functional proteins, and decrease levels of toxic proteins. ASOs are being developed for the treatment of motor neuron diseases (MNDs), including spinal muscular atrophy (SMA), amyotrophic lateral sclerosis (ALS) and spinal and bulbar muscular atrophy (SBMA). The biggest success has been the ASO known as nusinersen, the first effective therapy for SMA, able to improve symptoms and slow disease progression. Another success is tofersen, an ASO designed to treat ALS patients with SOD1 gene mutations. Both ASOs have been approved by the FDA and EMA. On the other hand, ASO treatment in ALS patients with the C9orf72 gene mutation did not show any improvement in disease progression. The aim of this review is to provide an up-to-date overview of ASO research in MNDs, from preclinical studies to clinical trials and, where available, regulatory approval. We highlight the successes and failures, underline the strengths and limitations of the current ASO research, and suggest possible approaches that could lead to more effective treatments. Full article