Search Results (66)

This study examines the pigments and materials used in Girolamo Romanino’s Musicians fresco (1537–1538), located in the Duomo Vecchio in Brescia, with the aim of identifying and analyzing the artist’s colour palette. Ten samples of the pictorial layer and mortar were collected from two frescoes and characterized using microscopic and spectroscopic techniques. Confocal laser scanning microscopy (CLSM) was used to define the best positions where single-point, spectroscopic techniques could be applied. Raman spectroscopy and micro-Fourier transform Infrared spectroscopy (micro-FTIR) were used to detect pigments and organic binders, respectively. X-ray powder diffraction (XRPD) provided additional insights into the mineral composition of the pigmenting layers, in combination with environmental scanning electron microscopy equipped with energy-dispersive spectroscopy (ESEM-EDS). The analysis revealed the use of traditional fresco pigments, including calcite, carbon black, ochres, and copper-based pigments. Smalt, manganese earths, and gold were also identified, reflecting Romanino’s approach to colour and material selection. Additionally, the detection of modern pigments such as titanium white and baryte points to restoration interventions, shedding light on the fresco’s conservation history. This research provides one of the most comprehensive analyses of pigments in Romanino’s works, contributing to a deeper understanding of his artistic practices and contemporary fresco techniques. Full article

The Chengyang City (城阳城) site in Xinyang, Henan Province, China, was a significant northern military stronghold of the Chu state during the Warring States period (475/403–221 BCE). The lacquered armor unearthed from Tomb M18 provides critical material evidence for studying ancient military technology and lacquer craftsmanship. In this study, a comprehensive analytical approach combining ultra-depth optical microscopy, Fourier-transform infrared spectroscopy (FTIR), confocal micro-Raman spectroscopy, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) and pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS) were employed to systematically characterize the structural and compositional features of the armor samples. The results indicate that the armor was constructed with a leather substrate and lacked any lacquer ash layer, while the surface exhibited multiple layers of mixed laccol and urushiol-based lacquer coatings. Cinnabar (HgS) was identified as the primary red pigment, and no carbon black or iron-based blackening agents were detected in the dark lacquer layers. Notably, the presence of laccol suggests that such lacquer resources may have also been produced in mainland China, offering new perspectives on the prevailing view that associates laccol exclusively with “Vietnamese lacquer.” This study elucidates the technological characteristics of mid-Warring States period lacquered armor, provides scientific insights into ancient lacquering techniques, and contributes valuable data for the conservation and restoration of similar cultural heritage artifacts. Full article

Microplastics (MPs) represent a persistent class of emerging contaminants, of which significant amounts can be found in sewage sludge. In this study, the effect of hydrothermal carbonization (HTC) temperature on MPs and the properties of digested sewage sludge (DSS) was evaluated. The HTC process was carried out at temperatures of 200, 210, and 220 °C for 2 h in a batch reactor, and the solid products were subjected to (i) mass balance and fuel properties and (ii) microplastic occurrence analysis using Confocal Raman Microspectroscopy and Scanning Electron Microscopy. In digested sludge, 2700 ± 475 MP particles/100 g d.m. were detected, mostly fragments with ~350 ± 100 fibers. Hydrocharcontained only black and brown fragments in the following amounts: 4175 ± 575 (200 °C), 4450 ± 700 (210 °C), and 1450 ± 590 (220 °C), respectively, after 2 h. The microplastic removal rate was 54% for the highest temperature. Polystyrene (PS) was identified in untreated sludge, while only PE was detected after HTC at 200–210 °C, and no MPs were identifiable at 220 °C. The surfaces of post-MPs exhibited progressive degradation with increasing HTC temperature. The results confirm that HTC lowers the content and alters the physicochemical properties of microplastics, reducing their thermal stability and degrading their structure, while simultaneously improving the fuel properties of hydrochars by increasing the calorific value and carbon content. Full article

Cutaneous melanoma is an aggressive form of skin cancer and a leading cause of cancer-related mortality. In this sense, Raman Spectroscopy (RS) could represent a fast and effective method for melanoma-related diagnosis. We therefore introduced a new method based on RS to distinguish Compound Naevi (CN) from Primary Cutaneous Melanoma (PCM) from ex vivo solid biopsies. To this aim, integrating Confocal Raman Micro-Spectroscopy (CRM) with four Machine Learning (ML) algorithms: Linear Discriminant Analysis (LDA), Quadratic Discriminant Analysis (QDA), Support Vector Machine (SVM), and Random Forest Classifier (RFC). We focused our attention on the comparison between traditional pre-processing operations with Continuous Wavelet Transform (CWT). In particular, CWT led to the maximum classification accuracy, which was ∼89.0%, which highlighted the method as promising in view of future implementations in devices for everyday use. Full article

Until now, achieving both a high spectral resolution on the order of a few wavenumbers and the highest sensitivity in Raman scattering spectroscopy has required reliance on high-end laboratory instruments. Here, we introduce an innovative yet design-wise simple alternative: a cost-effective and compact micro-Raman spectrometer (µRS) that combines exceptional spectral resolution and sensitivity. Leveraging industrial-grade CMOS cameras and high-quality photographic objectives, our µRS maintains a footprint at least five times smaller than traditional lab-based spectrometers. Through detailed characterization and direct experimental comparison, which includes the use of calcite as a Raman standard, we demonstrate that our µRS achieves a spectral resolution of down to 2.5 cm⁻¹. Using a single-layer MoS₂ sample, we found that the sensitivity of our system, while somewhat lower, remains within a useful range compared to commercial research-grade confocal Raman microscopy systems. This study presents a compelling solution for researchers seeking efficient and high-resolution Raman spectroscopy tools across diverse applications, particularly in resource-limited or field-based settings. Full article

Amazonian fruit residues like piquia shells are often discarded despite their antioxidant potential for sustainable cosmetic use. This study evaluated the photostability, phototoxicity, and photoprotection of hydroalcoholic piquia shell extract (PqSE) combined with UV filters in solutions and cosmetic formulations. PqSE formulations were photostable, even stabilizing photounstable UV filters. Phototoxicity tests (OECD TG 432) showed no phototoxic potential (MPE < 0.15) and reduction in the phototoxic potential of UV filters, while ocular irritation potential via HET-CAM assay indicated no irritant effects. The extract combined with UV filters enhanced protection against UVA-induced reactive oxygen species (ROS) production, achieving 60.9% effectiveness, outperforming commercial photostabilizers. Against UVB radiation, it showed cellular viability above 80%, comparable to benzophenone-3. PqSE formulations exhibited a radical protection factor (RPF) nine times higher than controls and reduced radical production by 64% after visible/near-infrared (VIS/NIR) irradiation on porcine skin, compared to 38% for controls. Confocal Raman microspectroscopy showed penetration depths below 12 µm for all time points. This study highlights the potential of reusing fruit residues like PqSE as sustainable, effective ingredients in sunscreen formulations, offering enhanced photoprotection and reduced environmental waste. Full article

Microplastics (MPLs) and nanoplastics (NPLs) are smaller particles derived from larger plastic material, polymerization, or refuse. In context to environmental health, they are separated into the industrially-created “primary” category or the degradation derivative “secondary” category where the particles exhibit different physiochemical characteristics that attenuate their toxicities. However, some particle types are more well documented in terms of their fate in the environment and potential toxicological effects (secondary) versus their industrial fabrication and chemical characterization (primary). Fourier Transform Infrared Spectroscopy (FTIR/µ-FTIR), Raman/µ-Raman, Proton Nuclear Magnetic Resonance (H-NMR), Curie Point-Gas Chromatography-Mass Spectrometry (CP-gc-MS), Induced Coupled Plasma-Mass Spectrometry (ICP-MS), Nanoparticle Tracking Analysis (NTA), Field Flow Fractionation-Multiple Angle Light Scattering (FFF-MALS), Differential Scanning Calorimetry (DSC), Thermogravimetry (TGA), Differential Mobility Particle [Sizing] (DMPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Scanning Transmission X-ray Microspectroscopy (STXM) are reviewed as part of a suite of characterization methods for physiochemical ascertainment and distinguishment. In addition, Optical-Photothermal Infrared Microspectroscopy (O-PTIR), Z-Stack Confocal Microscopy, Mueller Matrix Polarimetry, and Digital Holography (DH) are touched upon as a suite of cutting-edge modes of characterization. Organizations, like the water treatment or waste management industry, and those in groups that bring awareness to this issue, which are in direct contact with the hydrosphere, can utilize these techniques in order to sense and remediate this plastic polymer pollution. The primary goal of this review paper is to highlight the extent of plastic pollution in the environment as well as introduce its effect on the biodiversity of the planet while underscoring current characterization techniques in this field of research. The secondary goal involves illustrating current and theoretical avenues in which future research needs to address and optimize MPL/NPL remediation, utilizing nanotechnology, before this sleeping giant of a problem awakens. Full article

Polymeric Intraocular lenses (IOLs) are vital for restoring vision following cataract surgery and for correcting refractive errors. Despite technological and medical advancements, challenges persist in achieving optimal vision and preventing complications. Surface modifications aim to mitigate the risk of posterior capsule opacification (PCO), while pre-operative measurements aid in selecting suitable IOLs. However, individualized solutions are lacking and there is a clear demand for the development of fully customized IOL surfaces. We employ laser micromachining technology for precise modifications via ablation on PMMA and acrylic IOLs, using femtosecond (fs), nanosecond (ns), and diode continuous wave (CW) lasers, at wavelengths ranging from near-ultraviolet to infrared. Characterization reveals controlled ablation patterning, achieving feature sizes from as small as 400 nm to several micrometers. Regular and confocal micro-Raman spectroscopy revealed alterations of the IOL materials’ structural integrity for some patterning cases, thus affecting the optical properties, while these can be minimized by the proper selection of micromachining conditions. The results suggest the feasibility of accurate IOL patterning, which could offer personalized vision correction solutions, based on relevant corneal wavefront data, thus surpassing standard lenses, marking a significant advancement in cataract surgery outcomes. Full article

Despite extensive research efforts, cancer continues to stand as one of the leading causes of death on a global scale. To gain profound insights into the intricate mechanisms underlying cancer onset and progression, it is imperative to possess methodologies that allow the study of cancer cells at the single-cell level, focusing on critical parameters such as cell morphology, metabolism, and molecular characteristics. These insights are essential for effectively discerning between healthy and cancerous cells and comprehending tumoral progression. Recent advancements in microscopy techniques have significantly advanced the study of cancer cells, with Raman microspectroscopy (RM) emerging as a particularly powerful tool. Indeed, RM can provide both biochemical and spatial details at the single-cell level without the need for labels or causing disruptions to cell integrity. Moreover, RM can be correlated with other microscopy techniques, creating a synergy that offers a spectrum of complementary insights into cancer cell morphology and biology. This review aims to explore the correlation between RM and other microscopy techniques such as confocal fluoresce microscopy (CFM), atomic force microscopy (AFM), digital holography microscopy (DHM), and mass spectrometry imaging (MSI). Each of these techniques has their own strengths, providing different perspectives and parameters about cancer cell features. The correlation between information from these various analysis methods is a valuable tool for physicians and researchers, aiding in the comprehension of cancer cell morphology and biology, unraveling mechanisms underlying cancer progression, and facilitating the development of early diagnosis and/or monitoring cancer progression. Full article

Cangjie Temple was built to commemorate Cangjie, the legendary inventor of Chinese characters. It stands as one of the few remaining temples in China dedicated to the invention and creation of writing. In this study, the material properties of wooden paintings from the Cangjie temple were characterized using Polarized Light Microscopy (PLM), Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy (SEM-EDS), Micro-confocal Raman Spectroscopy, X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Pyrolysis-Gas Chromatography-Mass Spectrometry (Py-GC/MS). It was confirmed that the pigments of the paintings included cinnabar, lapis lazuli, lead white, Paris green, and carbon black. The proteinaceous glue was used as an adhesive in the pigment samples, with tung oil likely being utilized as a primer for the wooden structures before painting. This study not only provides valuable data support for the conservation and restoration of the architectural features of Cangjie Temple but also provides useful reference for the maintenance and inheritance of similar ancient buildings. Full article

Microfluidic technology provides a solution to the challenge of continuous CaCO₃ particle synthesis. In this study, we utilized a 3D-printed microfluidic chip to synthesize CaCO₃ micro- and nanoparticles in vaterite form. Our primary focus was on investigating a continuous one-phase synthesis method tailored for the crystallization of these particles. By employing a combination of confocal and scanning electron microscopy, along with Raman spectroscopy, we were able to thoroughly evaluate the synthesis efficiency. This evaluation included aspects such as particle size distribution, morphology, and polymorph composition. The results unveiled the existence of two distinct synthesis regimes within the 3D-printed microfluidic chips, which featured a channel cross-section of 2 mm². In the first regime, which was characterized by chaotic advection, particles with an average diameter of around 2 $\mathsf{\mu }$m were produced, thereby displaying a broad size distribution. Conversely, the second regime, marked by diffusion mixing, led to the synthesis of submicron particles (approximately 800–900 nm in diameter) and even nanosized particles (70–80 nm). This research significantly contributes valuable insights to both the understanding and optimization of microfluidic synthesis processes, particularly in achieving the controlled production of submicron and nanoscale particles. Full article

Fused deposition modeling (FDM) is a rather new technology in the production of personalized dosage forms. The melting and printing of polymer–active pharmaceutical ingredient (API)—mixtures can be used to produce oral dosage forms with different dosage as well as release behavior. This process is utilized to increase the bioavailability of pharmaceutically relevant active ingredients that are poorly soluble in physiological medium by transforming them into solid amorphous dispersions (ASD). The release from such ASDs is expected to be faster and higher compared to the raw materials and thus enhance bioavailability. Printing directly from powder while forming ASDs from loperamide in Polyvinylalcohol was realized. Different techniques such as a change in infill and the incorporation of sorbitol as a plastisizer to change release patterns as well as a non-destructive way for the determination of API distribution were shown. By measuring the melt viscosities of the mixtures printed, a rheological model for the printer used is proposed. Full article

The peroxisome proliferator-activated receptor (PPAR) ligands modulate a variety of skin functions but are rarely used in cosmetics. The aim of this double-blind, placebo-controlled, in vivo study was to determine the effect of a topically applied 0.1% PPAR ligand on the composition and physiological parameters of the stratum corneum (SC). By comparing verum and placebo groups post-treatment, we demonstrate (via lipidomic analysis of tape strips) an unstatistically significant trend toward an increase in long-chain triacylglycerols (C50–C56) and medium- and long-chain ceramides (C42–C50) at the superficial SC. By comparing treated and untreated skin using confocal Raman microspectroscopy, we found that the changes in lipid composition in the verum group led to a significant increase in the number of trans conformers and orthorhombic organisation of lipids at the exemplary SC depth. An increase in unfolded states in the secondary and tertiary keratin structures results in an increased ability to bind water. The concentrations of tightly and strongly bound water increase, while weakly bound and unbound water decrease in the entire SC, indicating a transformation of water mobility to a state of increased hydrogen bonding. Thus, the topical PPAR ligands improve the water-holding capacity and the barrier function of the SC. Full article

A simple and efficient method for the synthesis of biodegradable, highly branched polycaprolactone (PCL) is presented. The solvent-free (bulk) reaction was carried out via ring opening polymerization (ROP), catalyzed by tin octanoate Sn(Oct)₂, and it employed hyperbranched polyamide (HPPA) as a macro-initiator. The core–shell structure of the obtained products (PCL-HPPA), with the hyperbranched HPPA core and linear PCL chains as shell, was in the focus of the product characterization. ¹H nuclear magnetic resonance (¹H NMR) and elemental analysis confirmed the covalent incorporation of the HPPA in the products, as well as a high degree of grafting conversion of its amino functional groups. Confocal Raman Micro spectroscopy, and especially Time-of-Flight Secondary Ion Mass Spectrometry, further supported the existence of a core–shell structure in the products. Direct observation of macromolecules by means of cryogenic transmission electron microscopy, as well as gel permeation chromatography (GPC), suggested the existence of a minor ‘aggregated’ product fraction with multiple HPPA cores, which was attributed to transesterification reactions. Differential scanning calorimetry, as well as X-ray diffraction, demonstrated that the PCL-HPPA polymers displayed a similar degree of crystallinity to linear neat PCL, but that the branched products possessed smaller and less regular crystallites. Full article

Lithium fluoride (LiF) film detectors for extreme ultraviolet radiation, soft and hard X-rays, based on the photoluminescence of radiation-induced electronic defects, have been proposed and are currently under further development and investigation. LiF film detectors are versatile and can be integrated in different experimental apparatus and imaging configurations. LiF can be grown in the form of polycrystalline thin films and it is compatible with several substrates. The radiation-induced color center (CCs) photoluminescence (PL) response can be enhanced through the appropriate choice of substrates and multilayer designs, and by tailoring the micro-structural properties of polycrystalline LiF films through the control of the growth conditions. In this work, we present the characterization, through fluorescence and Raman micro-spectroscopy, of LiF films, thermally evaporated on different substrates with thicknesses of up to 1 μm, irradiated with soft X-rays produced by a laser plasma source. The combination of these micro-spectroscopy techniques could represent an advanced method to investigate the role of the polycrystalline film structures in CC formation efficiency at the microscopic level, a fundamental aspect of the development of LiF film radiation-imaging detectors. Full article