Search Results (116)

Windows are a major contributor to energy loss in buildings, particularly in hot climates where solar radiation heat gain significantly increases cooling demand. An ideal energy-efficient window must maintain high visible light transmittance while effectively blocking ultraviolet and near-infrared radiation, presenting a significant challenge for material design. We propose a plasma silica aerogel window utilizing the local surface plasmon resonance effect of plasmonic nanoparticles. This design incorporates indium tin oxide (ITO) nanospheres (for broad-band UV/NIR blocking) and silver (Ag) nanocylinders (targeted blocking of the 0.78–0.9 μm NIR band) co-doped into the silica aerogel. This design achieves a visible light transmittance of 0.8, a haze value below 0.12, and a photothermal ratio of 0.91. Building simulations indicate that compared to traditional glass, this window can achieve annual energy savings of 20–40% and significantly reduce the economic losses associated with traditional glass, providing a feasible solution for sustainable buildings. Full article

Nanotechnology has significantly advanced cancer therapy, particularly through the development of multifunctional nanoparticles (NPs) capable of acting as both therapeutic and diagnostic agents. This review focuses on the synergistic integration of radiotherapy (RT) and photothermal therapy (PTT) mediated by engineered NPs—a rapidly evolving strategy that enhances tumor specificity, minimizes healthy tissue damage, and enables real-time imaging. By analyzing the recent literature, we highlight the dual role of NPs in amplifying radiation-induced DNA damage and converting near-infrared (NIR) light into localized thermal energy. The review classifies various metal-based and composite nanomaterials (e.g., Au, Pt, Bi, Cu, and Fe) and evaluates their performance in preclinical RT–PTT settings. We also discuss the physicochemical properties, targeting strategies, and theragnostic applications that contribute to treatment efficiency. Unlike conventional combinatorial therapies, NP-mediated RT–PTT enables high spatial–temporal control, immunogenic potential, and integration with multimodal imaging. We conclude with the current challenges, translational barriers, and outlooks for clinical implementation. This work provides a comprehensive, up-to-date synthesis of NP-assisted RT–PTT as a powerful approach within the emerging field of nano-oncology. Full article

The current study presents the results of a methodical investigation into the ionization of rare gas atoms, specifically focusing on argon. In this study, two configurations are examined: ionization via a near-infrared (NIR) laser field alone, and ionization caused by extreme ultraviolet (XUV) radiation in the presence of a strong, synchronized NIR pulse. The theoretical investigation is conducted using an ab initio method to solve the time-dependent Schrödinger equation within the single active electron (SAE) approximation. The simulation results show a sequence of above-threshold ionization (ATI) peaks that shift to lower energies with increasing laser intensity. This behavior reflects the onset of the Stark effect, which modifies atomic energy levels and increases the number of photons required for ionization. An examination of the two-color photoionization spectrum, which includes sideband structures and harmonic peaks, shows how the ionization probability is redistributed between the direct path (single XUV photon absorption) and sideband pathways (XUV ± n × IR) as the intensity of the infrared field increases. Quantum interference between continuum states is further revealed by the photoelectron angular distribution, clearly indicating the control of ionization dynamics by the IR field. Full article

Albumin-based nanoparticles are promising drug delivery systems due to their biocompatibility, biodegradability, and ability to improve targeted drug release. Among various preparation methods, radiation-induced cross-linking in the presence of ethanol has been proposed in the literature as an effective method for producing protein nanoparticles with preserved bioactivity and controlled size. However, the mechanisms by which ethanol radicals contribute to protein aggregation remain insufficiently understood. In this study, we investigate the role of ethanol in the aggregation of albumins to determine whether its presence is necessary or beneficial for nanoparticle formation. Using pulse radiolysis, spectroscopy methods, resonance light scattering (RLS), and near-infrared (NIR) spectroscopy, we examined aqueous ethanol solutions of albumins before and after irradiation. Our results show that ethanol concentrations above 40% (v/v) significantly promote both radiation-induced and spontaneous protein aggregation. Mechanistic analysis indicates that ethanol radicals react with albumin similarly to hydrated electrons, mainly targeting disulfide bridges. This reaction leads to the formation of sulfur-centered radicals and the formation of intermolecular disulfide bonds that stabilize protein nanostructures by excluding the formation of dityrosine bridges, as described in the literature. In contrast, ethanol concentration below 40% does not favor the radiation-induced aggregation compared to the solution containing t-BuOH. These results provide novel insights into the role of organic cosolvents in protein aggregation and contribute to a broader understanding of the mechanisms of formation of albumin-based nanoparticles using ionizing radiation. Full article

Conducting polymer (CP) nanoparticles have emerged as innovative materials for biomedical applications, particularly due to their safe interaction with biological systems. This study focuses on the synthesis, morphological, and spectroscopic characterization of polypyrrole nanoparticles (PPy-NPs) as photoactivatable agents under near-infrared (NIR) radiation for the inactivation of pathogenic bacteria. We successfully synthesized uniform nanoparticles (~180 nm) with strong absorption in the NIR region. A comprehensive characterization was performed using electron microscopy, dynamic light scattering, X-ray diffraction, and UV–Vis and infrared spectroscopy. The microbiological evaluation focused on elucidating the inactivation mechanism of Pseudomonas aeruginosa, particularly through oxidative stress induction, metabolic activity alteration, and cell membrane disruption. Our results highlight the significant potential of PPy-NPs as photoactivatable agents for the targeted inactivation of pathogenic microorganisms, underscoring their promising applications in antimicrobial surface coatings. Full article

Amazonian fruit residues like piquia shells are often discarded despite their antioxidant potential for sustainable cosmetic use. This study evaluated the photostability, phototoxicity, and photoprotection of hydroalcoholic piquia shell extract (PqSE) combined with UV filters in solutions and cosmetic formulations. PqSE formulations were photostable, even stabilizing photounstable UV filters. Phototoxicity tests (OECD TG 432) showed no phototoxic potential (MPE < 0.15) and reduction in the phototoxic potential of UV filters, while ocular irritation potential via HET-CAM assay indicated no irritant effects. The extract combined with UV filters enhanced protection against UVA-induced reactive oxygen species (ROS) production, achieving 60.9% effectiveness, outperforming commercial photostabilizers. Against UVB radiation, it showed cellular viability above 80%, comparable to benzophenone-3. PqSE formulations exhibited a radical protection factor (RPF) nine times higher than controls and reduced radical production by 64% after visible/near-infrared (VIS/NIR) irradiation on porcine skin, compared to 38% for controls. Confocal Raman microspectroscopy showed penetration depths below 12 µm for all time points. This study highlights the potential of reusing fruit residues like PqSE as sustainable, effective ingredients in sunscreen formulations, offering enhanced photoprotection and reduced environmental waste. Full article

Radiative cooling, an emerging technology that reflects sunlight and emits radiation into outer space, has gained much attention due to its energy-efficient nature and broad applicability in buildings, photovoltaic cells, and vehicles. This study focused on fabricating SiO₂-polymethyl methacrylate (PMMA) and TiO₂-SiO₂-PMMA thick films via the blade-coating method. The investigation aimed to improve cooling performance by adding TiO₂ particles to increase the coverage area and utilize the TiO₂ reflectance ability. The characterizations of the emissivity/absorptivity, solar reflectance, and microstructure of the thick films were conducted by using ultraviolet–visible/near-infrared (UV-Vis/NIR) diffuse reflection spectroscopy and scanning electron microscopy, respectively. Experimental results revealed that the maximum temperature drops of approximately 9.4 and 9.8 °C were achieved during the daytime period for SiO₂-PMMA and TiO₂-SiO₂-PMMA thick films. The total solar radiation reflectivity increased from 71.7 to 75.6% for SiO₂-PMMA radiative cooling thick films after adding TiO₂. These findings underscored the potential of TiO₂-SiO₂-PMMA thick films in advancing radiative cooling technology and cooling capabilities across various applications. Full article

Far infrared radiation (FIR) within the wavelength range of 4–14 μm can offer human health benefits, such as improving blood flow. Therefore, additives that emit far infrared radiation have the potential to be incorporated into polymer/fabric matrices to develop textiles that could promote health. In this study, biochar derived from candlenuts and pyrolyzed with activated carbon (AC) was incorporated into polypropylene (PP) films and investigated for its potential as a health-promoting textile additive. The properties of biochar were compared with other far infrared (FIR) emitting additives such as hematite, Indian red ochre, and graphene. The addition of biochar increased FIR emissivity to 0.90, which is 9% higher than that of pristine PP. Additionally, biochar enhanced UV and near-infrared (NIR) blocking capabilities, achieving an ultra-protection factor (UPF) of 91.41 and NIR shielding of 95.85%. Incorporating 2 wt% biochar resulted in a 3.3-fold higher temperature increase compared to pristine PP after 30 s of exposure to an FIR source, demonstrating improved heat retention. Furthermore, the ability to achieve the lowest thermal effusivity among other additives supports the potential use of biochar-incorporated fabric as a warming material in cold climates. The tensile properties of PP films with biochar were superior to those with other additives, potentially contributing to a longer product lifespan. Additionally, samples with red ochre exhibited the highest FIR emissivity, while samples with hematite showed the highest capacity for UV shielding. Full article

Cs_0.33WO₃ (CWO) is a widely used inorganic material in window films and glass coatings, known for its excellent near-infrared radiation (NIR) blocking property and high visible light transmittance (T_vis). However, the stability of NIR blocking and the optical properties of CWO in the process of application is an urgent and important problem, because significant changes in optical results can impact the related products, such as window films, glass coatings, and so on. In this paper, the particle sizes and optical properties of CWO are tested to study the light stability and their relative relations. The results indicate that CWO particle sizes between 130 nm and 100 nm (D90, the point where 90% of the particles have a diameter smaller than the specified value) exhibit high stability in terms of NIR blocking and visible light transmittance (Tvis). CWO particles with D90 < 100 nm experience a greater reduction in NIR blocking, though this ability significantly recovers upon exposure to sunlight, making these coatings particularly suitable for use in tropical and subtropical climates. Full article

Uvsq-Sat NG is a French 6U CubeSat (10 × 20 × 30 cm) of the International Satellite Program in Research and Education (INSPIRE) designed primarily for observing greenhouse gases (GHG) such as CO₂ and CH₄, measuring the Earth’s radiation budget (ERB), and monitoring solar spectral irradiance (SSI) at the top-of-atmosphere (TOA). It epitomizes an advancement in CubeSat technology, showcasing its enhanced capabilities for comprehensive Earth observation. Scheduled for launch in 2025, the satellite carries a compact and miniaturized near-infrared (NIR) spectrometer capable of performing observations in both nadir and solar directions within the wavelength range of 1100 to 2000 nm, with a spectral resolution of 7 nm and a 0.15° field of view. This study outlines the preflight calibration process of the Uvsq-Sat NG NIR spectrometer (UNIS), with a focus on the spectral response function and the absolute calibration of the instrument. The absolute scale of the UNIS spectrometer was accurately calibrated with a quartz-halogen lamp featuring a coiled-coil tungsten filament, certified by the National Institute of Standards and Technology (NIST) as a standard of spectral irradiance. Furthermore, this study details the ground-based measurements of direct SSI through atmospheric NIR windows conducted with the UNIS spectrometer. The measurements were obtained at the Pommier site (45.54°N, 0.83°W) in Charentes–Maritimes (France) on 9 May 2024. The objective of these measurements was to verify the absolute calibration of the UNIS spectrometer conducted in the laboratory and to provide an extraterrestrial solar spectrum using the Langley-plot technique. By extrapolating the data to AirMass Zero (AM0), we obtained high-precision results that show excellent agreement with SOLAR-HRS and TSIS-1 HSRS solar spectra. At 1.6 μm, the SSI was determined to be 238.59 ± 3.39 mW.m⁻².nm⁻¹ (k = 2). These results demonstrate the accuracy and reliability of the UNIS spectrometer for both SSI observations and GHG measurements, providing a solid foundation for future orbital data collection and analysis. Full article

Fine-needle aspiration biopsy is crucial for modern diagnostics of endoscopic procedures and thus an efficient and reliable method for increasing biopsy yields is urgently needed. In our study, we address the limited availability and high price of the rapid onsite evaluation (ROSE) technique by introducing the technique of near-infrared on-site evaluation (NOSE) consisting of spectral measurement of near-infrared radiation (NIR) transmitted through the evaluated material. For this purpose, we designed a special optical probe consisting of two fibres, of which one is a source fibre and the second is a detector fibre. The distal ends of both fibres are brought together into one bundle which is, with the help of a special extension, applied to a cuvette with an analysed sample at a defined distance from the cuvette bottom and fixed in place. A portion of the NIR radiation received by the detector fibre after it propagates through the sample then depends on the optical and therefore morphological characteristics of the sample. Based on the measured spectral curve, we can calculate the attenuation coefficient curve and subsequently the parameter of the sample richness and the parameter characterising the autofluorescence peak as well. We found that the value of our introduced parameters is in significant relation to sample richness as well as to sample malignity. NOSE evaluation of EBUS/EUSb (endobronchial/oesophageal ultrasound bronchoscopy) specimens can be considered an easy new technique aiming to improve sampling diagnostic accuracy and to diminish costs related to the presence of a cytopathologist and related instrumentation in the endoscopy suite. Full article

The significance of soil in the agricultural industry is profound, with healthy soil representing an important role in ensuring food security. In addition, soil is the largest terrestrial carbon sink on earth. The soil carbon pool is composed of both inorganic and organic forms. The equilibrium of the soil carbon pool directly impacts the carbon cycle via all of the other processes on the planet. With the development of agricultural systems from traditional to conventional ones, and with the current era of precision agriculture, which involves making decisions based on information, the importance of understanding soil is becoming increasingly clear. The control of microenvironment conditions and soil fertility represents a key factor in achieving higher productivity in these systems. Furthermore, agriculture represents a significant contributor to carbon emissions, a topic that has become timely given the necessity for carbon neutrality. In addition to these concerns, updating soil-related data, including information on macro and micronutrient conditions, is important. Carbon represents one of the major nutrients for crops and plays a key role in the retention and release of other nutrients and the management of soil physical properties. Despite the importance of carbon, existing analytical methods are complex and expensive. This discourages frequent analyses, which results in a lack of soil carbon-related data for agricultural fields. From this perspective, in situ soil organic carbon (SOC) analysis can provide timely management information for calibrating fertilizer applications based on the soil–carbon relationship to increase soil productivity. In addition, the available data need frequent updates due to rapid changes in ecosystem services and the use of extensive fertilizers and pesticides. Despite the importance of this topic, few studies have investigated the potential of image analysis based on image processing and spectral data recording. The use of spectroscopy and visual color matching to develop SOC predictions has been considered, and the use of spectroscopic instruments has led to increased precision. Our extensive literature review shows that color models, especially Munsell color charts, are better for qualitative purposes and that Cartesian-type color models are appropriate for quantification. Even for the color model, spectroscopy data could be used, and these data have the potential to improve the precision of measurements. On the other hand, mid-infrared radiation (MIR) and near-infrared radiation (NIR) diffuse reflection has been reported to have a greater ability to predict SOC. Finally, this article reports the availability of inexpensive portable instruments that can enable the development of in situ SOC analysis from reflection and emission information with the integration of images and spectroscopy. This integration refers to machine learning algorithms with a reflection-oriented spectrophotometer and emission-based thermal images which have the potential to predict SOC without the need for expensive instruments and are easy to use in farm applications. Full article

Perovskites have been largely implemented into optoelectronics as they provide several advantages such as long carrier diffusion length, high absorption coefficient, high carrier mobility, shallow defect levels and finally, high crystal quality. The brisk technological development of perovskite devices is connected to their relative simplicity, high-efficiency processing and low production cost. Significant improvement has been made in the detection performance and the photodetectors’ design, especially operating in the visible (VIS) and near-infrared (NIR) regions. This paper attempts to determine the importance of those devices in the broad group of standard VIS and NIR detectors. The paper evaluates the most important parameters of perovskite detectors, including current responsivity (R), detectivity (D*) and response time (τ), compared to the standard photodiodes (PDs) available on the commercial market. The conclusions presented in this work are based on an analysis of the reported data in the vast pieces of literature. A large discrepancy is observed in the demonstrated R and D*, which may be due to two reasons: immature device technology and erroneous D* estimates. The published performance at room temperature is even higher than that reported for typical detectors. The utmost D* for perovskite detectors is three to four orders of magnitude higher than commercially available VIS PDs. Some papers report a D* close to the physical limit defined by signal fluctuations and background radiation. However, it is likely that this performance is overestimated. Finally, the paper concludes with an attempt to determine the progress of perovskite optoelectronic devices in the future. Full article

In small clinical studies, the application of transcranial photobiomodulation (PBM), which typically delivers low-intensity near-infrared (NIR) to treat the brain, has led to some remarkable results in the treatment of dementia and several neurodegenerative diseases. However, despite the extensive literature detailing the mechanisms of action underlying PBM outcomes, the specific mechanisms affecting neurodegenerative diseases are not entirely clear. While large clinical trials are warranted to validate these findings, evidence of the mechanisms can explain and thus provide credible support for PBM as a potential treatment for these diseases. Tubulin and its polymerized state of microtubules have been known to play important roles in the pathology of Alzheimer’s and other neurodegenerative diseases. Thus, we investigated the effects of PBM on these cellular structures in the quest for insights into the underlying therapeutic mechanisms. In this study, we employed a Raman spectroscopic analysis of the amide I band of polymerized samples of tubulin exposed to pulsed low-intensity NIR radiation (810 nm, 10 Hz, $22.5$ J/cm² dose). Peaks in the Raman fingerprint region (300–1900 cm⁻¹)—in particular, in the amide I band (1600–1700 cm⁻¹)—were used to quantify the percentage of protein secondary structures. Under this band, hidden signals of $\mathrm{C}$=$\mathrm{O}$ stretching, belonging to different structures, are superimposed, producing a complex signal as a result. An accurate decomposition of the amide I band is therefore required for the reliable analysis of the conformation of proteins, which we achieved through a straightforward method employing a Voigt profile. This approach was validated through secondary structure analyses of unexposed control samples, for which comparisons with other values available in the literature could be conducted. Subsequently, using this validated method, we present novel findings of statistically significant alterations in the secondary structures of polymerized NIR-exposed tubulin, characterized by a notable decrease in $\mathsf{\alpha }$-helix content and a concurrent increase in $\mathsf{\beta }$-sheets compared to the control samples. This PBM-induced $\mathsf{\alpha }$-helix to $\mathsf{\beta }$-sheet transition connects to reduced microtubule stability and the introduction of dynamism to allow for the remodeling and, consequently, refreshing of microtubule structures. This newly discovered mechanism could have implications for reducing the risks associated with brain aging, including neurodegenerative diseases like Alzheimer’s disease, through the introduction of an intervention following this transition. Full article

Although the moderate thermal stimulation of articular cartilage exerts chondroprotective effects, it is difficult to effectively heat deep articular cartilage with conventional methods. Photosensitizers increase the ambient temperature using near-infrared (NIR) radiation, which has high tissue permeability. We hypothesized that the intra-articular administration of photosensitizers and NIR irradiation would exert a greater heating effect on articular cartilage. We aimed to evaluate the heating effect of this method on cultured chondrocytes and rat knee cartilage. In vitro, we irradiated a photosensitizer-containing medium with NIR and measured changes in the medium temperature, cytotoxicity, and gene expression of heat shock protein (HSP) 70 and aggrecan (ACAN). In vivo, the knee joints of rats treated with photosensitizers were irradiated with NIR, and changes in intra-articular temperature and gene expression were measured, alongside histological analysis. The results showed that the medium and intra-articular temperature were raised to approximately 40 °C with no apparent disruption to articular cartilage or the immunohistochemically enhanced staining of HSP70 in chondrocytes. The gene expression of HSP70 and ACAN was increased in both cultured and articular cartilage. In summary, this method can safely heat joints and enhance cartilage metabolism by inducing HSP70 expression in articular cartilage. It presents a new hyperthermia therapy with effective cartilage protection. Full article