Search Results (49)

The rapid pace of modern life has contributed to a significant decline in sleep quality, which has become an urgent global public health issue. Melatonin, an endogenous hormone that regulates circadian rhythms, is vital in maintaining normal sleep cycles. While oral melatonin supplementation is widely used, transdermal delivery systems present advantages that include the avoidance of first-pass metabolism effects and enhanced bioavailability. In this study, a novel melatonin transdermal delivery system was successfully developed using a thermosensitive poly(N-vinylcaprolactam) [p(NVCL)]-based carrier. The p(NVCL) polymer was synthesized through free radical polymerization and characterized for its structural properties and phase transition temperature, in alignment with skin surface conditions. Orthogonal optimization experiments identified 3% azone, 3% menthol, and 4% borneol as the optimal enhancer combination for enhanced transdermal absorption. The formulation demonstrated exceptional melatonin loading characteristics with high encapsulation efficiency and stable physicochemical properties, including an appropriate pH and optimal moisture content. Comprehensive in vivo evaluation using normal mouse models revealed significant sleep quality improvements, specifically a shortened sleep latency and extended non-rapid eye movement sleep duration, with elevated serum melatonin and serotonin levels. Safety assessments including histopathological examination, biochemical analysis, and 28-day continuous administration studies confirmed excellent biocompatibility with no adverse reactions or systemic toxicity. Near-infrared fluorescence imaging provided direct evidence of enhanced transdermal absorption and superior biodistribution compared to oral administration. These findings indicate that the p(NVCL)-based melatonin transdermal gel system offers a safe, effective and convenient non-prescription option for sleep regulation, with promising potential for clinical translation as a consumer sleep aid. Full article

All acute and chronic wound management strategies have limitations. Therefore, there is an urgent need to develop new treatment options for wound healing. Hydrogels based on natural polymers offer advantages in wound management because they can reduce patients’ pain, fight infection, and carry targeted drugs to speed up the healing process. In this study, we aimed to develop and investigate an alginate-grafted N-vinylcaprolactam-based matrix for a modified release of dexketoprofen (DEX), which is potentially useful in wound healing. Free radical polymerization and grafted techniques were used to prepare thermo-responsive hydrogels. The obtained hydrogels, unloaded hydrogel (HY) and dexketoprofen-loaded hydrogel (DEXHY), were characterized and analyzed. The concentration of DEX encapsulated in the polymer matrix was 4 mg/mL. The IC50 values found for the samples tested by us were 607.4 µg/mL for HY, 950.4 µg/mL for DEXHY, and 2239 µg/mL for DEX. The average value of cell viability (%) after the exposure of cells to DEXHY hydrogel was 75.4%. DEXHY exhibited a very good in vitro wound closure rate, given its ability to modify DEX release kinetics. The hydrogel developed in this study has shown considerable potential to facilitate and even accelerate wound healing, including surgical wounds, by inhibiting the overexpressed inflammation process. Full article

Dental infections can disrupt root development in immature permanent teeth, making traditional endodontic treatment challenging. Apexogenesis, a regenerative approach that promotes natural root development, offers a potential solution. However, issues related to disinfection and material biocompatibility still remain. The objective of this study was to evaluate the synergistic antimicrobial and antibiofilm properties of double and triple antibiotic combinations against common oral pathogens, and to incorporate the most effective combination into a thermosensitive hydrogel, to develop an alternative intracanal medication. Antibiotics were tested alone and in combination in planktonic and biofilm conditions of oral bacteria and Candida albicans. The antibiotic combinations with potential antimicrobial synergy were tested on Enterococcus faecalis biofilms in radicular dentin by confocal microscopy. Metronidazole (ME), ciprofloxacin (CI), and fosfomycin (FO) were incorporated into poly(N-vinylcaprolactam) (PNVCL) hydrogels, and their antibiofilm activity was compared to PNVCL hydrogels containing chlorhexidine (CHX) or calcium hydroxide (CH). The cytotoxicity of the hydrogels was assessed on MDPC-23 odontoblast-like cells using metiltetrazolium assays. A statistical analysis was performed using ANOVA followed by Tukey’s test (p < 0.05). The combination of ME + CI + FO showed superior antibiofilm effects in mono- and dual-species biofilms and on biofilms inside dentinal tubules, comparable to CHX. PNVCL hydrogels with ME + CI + FO significantly reduced E. faecalis biofilms in dentinal tubules, exhibiting a higher efficacy than PNVCL + CH. Cytotoxicity tests revealed minimal effects on cell viability for both PNVCL hydrogels with and without antibiotics. In conclusion, ME + CI + FO showed potent antimicrobial synergy and, when loaded in thermosensitive PNVCL hydrogel, demonstrated significant antibiofilm activity and low cytotoxicity. These findings emphasize the potential of this formulation as an effective and biocompatible endodontic medication, especially for the treatment of immature permanent teeth. Full article

Inorganic/organic composite passivation film can significantly improve the corrosion resistance performance of hot-dip Al-Zn-coated steel. However, yellowing of the passivation film always leads to obvious performance degradation in corrosion resistance. Investigating the yellowing mechanism of the passivation film and its impact on corrosion resistance would provide a foundation for enhancing its yellowing resistance property. This study primarily focuses on the yellowing mechanism of the passivation film based on the copolymer of N-vinylpyrrolidone and N-vinylcaprolactam. It is found that the oxidation and semi-carbonization of butyramide and valeroamide generated by C–N bond cleavage in the copolymer at high temperatures are responsible for the yellowing of the passivation film. The cracking of the passivation film caused by yellowing degree exposes more of the bare Al-Zn coating, further accelerating the degradation in the corrosion resistance. Additionally, it is observed that the impact of yellowing on the corrosion resistance is negligible when the color difference (ΔE*) caused by yellowing is less than 3.0, whereas ΔE* values above 3.0 result in rapid degradation in the corrosion resistance of the passivation film. The formula y = 0.77 − 0.07x + 0.023x² + 0.0039x³ effectively expresses the relationship between corrosion area (y) and ΔE* (x) (R² = 0.995). Full article

The topical therapy with rifampicin (RF)-based formulations is beneficial for treating postoperative wound infections and to accelerate healing. Despite recent research highlighting the antibiotic’s significant anti-inflammatory properties, limited topical wound healing products are currently available. The present study aimed to prove that the newly synthesized nanoparticles based on grafted alginate and poly(N-vinylcaprolactam) (pNVCL) and poly-lactic-co-glycolic acid (PLGA) contribute to the healing process of a wound. The methods used were at first the synthesis of the copolymer of alginate and pNVCL via grafting from technique and radical polymerization followed by water-in-oil-in water (W/O/W) emulsification; as oil phase PLGA dissolved in dichloromethane (DCM) was used. The formed nanoparticles were than characterized. The loaded RF was determined to be 160 µg/mL for a 20 mg formulation and within a four-hour time frame approximately 10% of the total loaded amount was released. The inhibitory concentrations (IC50) were 192.1 µg/mL for the nanoparticle, 208.8 µg/mL for pure rifampicin, and 718.1 µg/mL for the rifampicin-loaded nanoparticles. Considering the double role rifampicin was used for, the result was considered satisfactory in the way that these formulations could be used predominantly for postoperative wound irrigation in order to avoid infections and to improve healing. Full article

Poly (N-vinylcaprolactam) (PNVCL) and poly (N-isopropylacrylamide) (PNIPAm) are two popular negatively temperature-responsive hydrogels, due to their biocompatibility, softness, hydrophilicity, superabsorbency, viscoelasticity, and near-physiological lower critical solution temperature (LCST). These characteristics make them ideal for biomedical applications. When combined with other materials, hydrogel expansion induces the morphing of the assembly due to internal stress differences. Our recent developments in NVCL hydrogel, enhanced by nanoclay incorporation, have driven us to the creation of a bilayer structure to study its shapeshifting response across various temperatures. This study focused on the bending behaviour of bilayer samples composed of an active hydrogel layer and a passive non-swellable layer. Using photopolymerisation, circular discs and rectangular bilayer samples of varying sizes were fabricated. Homogeneous circular samples demonstrated that hydrogel density increased proportionally with temperature, with the swelling ratio exhibiting two distinct rates of change below and above its LCST. In bilayer samples, the volume of the passive layer influenced bending, and its optimal volume was identified. The investigation revealed that geometry affected the overall bending effect due to changes in the passive layer stiffness. Lastly, a temperature-responsive gripper capable of picking up objects several times its own weight was demonstrated, highlighting the potential of NVCL hydrogels as bioactuators for minimally invasive surgery. Full article

We report a biocompatible hydrogel dressing based on sodium alginate-grafted poly(N-vinylcaprolactam) prepared by encapsulation of Rifampicin as an antimicrobial drug and stabilizing the matrix through the repeated freeze–thawing method. The hydrogel structure and polymer-drug compatibility were confirmed by FTIR, and a series of hydrogen-bond-based interactions between alginate and Rifampicin were identified. A concentration of 0.69% Rifampicin was found in the polymeric matrix using HPLC analysis and spectrophotometric UV–Vis methods. The hydrogel’s morphology was evaluated by scanning electron microscopy, and various sizes and shapes of pores, ranging from almost spherical geometries to irregular ones, with a smooth surface of the pore walls and high interconnectivity in the presence of the drug, were identified. The hydrogels are bioadhesive, and the adhesion strength increased after Rifampicin was encapsulated into the polymeric matrix, which suggests that these compositions are suitable for wound dressings. Antimicrobial activity against S. aureus and MRSA, with an increased effect in the presence of the drug, was also found in the newly prepared hydrogels. In vitro biological evaluation demonstrated the cytocompatibility of the hydrogels and their ability to stimulate cell multiplication and mutual cell communication. The in vitro scratch assay demonstrated the drug-loaded alginate-grafted poly(N-vinylcaprolactam) hydrogel’s ability to stimulate cell migration and wound closure. All of these results suggest that the prepared hydrogels can be used as antimicrobial materials for wound healing and care applications. Full article

Six derivatives of poly-N-vinylcaprolactam (PNVCL) P1-P6 were synthesized via surfactant-free precipitation polymerization (SFPP) at 70 °C, with potassium persulfate (KPS) as the initiator. P5 and P6 were synthesized using the cross-linker N,N′-Methylenebisacrylamide (MBA). The conductivity was measured to monitor the polymerization process. The hydrodynamic diameters (HDs) and polydispersity indexes (PDIs) of aqueous dispersions of P1-P6 were determined using dynamic light scattering (DLS) and zeta potential (ZP) using electrophoretic mobilities. At 18 °C for P1–P6, the HDs (nm) were 428.32 ± 81.30 and PDI 0.31 ± 0.19, 528.60 ± 84.70 (PDI 0.42 ± 0,04), 425.96 ± 115.42 (PDI 0.56 ± 0.08), 440.34 ± 106.40 (PDI 0.52 ± 0.09), 198.39 ± 225.35 (PDI 0.40 ± 0.19), and 1201.52 ± 1318.05 (PDI 0.71 ± 0.30), the and ZPs were (mV) 0.90 ± 3.23, −4.46 ± 1.22, −6.44 ± 1.82, 0.22 ± 0.48, 0.18 ± 0.79, and −0.02 ± 0.39 for P1–P6, respectively. The lower critical solution temperature ranged from 27 to 29 °C. The polymers were characterized using the ATR-FTIR method. The study concluded that the physicochemical properties of the product were significantly affected by the initial reaction parameters. Polymers P1-P4 and P6 have potential for use as drug carriers for skin applications. Full article

Following the formulation development from a previous study utilising N-vinylcaprolactam (NVCL) and N-isopropylacrylamide (NIPAm) as monomers, poly(ethylene glycol) dimethacrylate (PEGDMA) as a chemical crosslinker, and Irgacure 2959 as photoinitiator, nanoclay (NC) is now incorporated into the selected formulation for enhanced mechanical performance and swelling ability. In this research, two types of NC, hydrophilic bentonite nanoclay (NCB) and surface-modified nanoclay (NCSM) of several percentages, were included in the formulation. The prepared mixtures were photopolymerised, and the fabricated gels were characterised through Fourier transform infrared spectroscopy (FTIR), cloud-point measurements, ultraviolet (UV) spectroscopy, pulsatile swelling, rheological analysis, and scanning electron microscopy (SEM). Furthermore, the effect of swelling temperature, NC types, and NC concentration on the hydrogels’ swelling ratio was studied through a full-factorial design of experiment (DOE). The successful photopolymerised NC-incorporated NVCL-NIPAm hydrogels retained the same lower critical solution temperature (LCST) as previously. Rheological analysis and SEM described the improved mechanical strength and polymer orientation of gels with any NCB percentage and low NCSM percentage. Finally, the temperature displayed the most significant effect on the hydrogels’ swelling ability, followed by the NC types and NC concentration. Introducing NC to hydrogels could potentially make them suitable for applications that require good mechanical performance. Full article

The design and manufacturing of objects in various industries have been fundamentally altered by the introduction of D-dimensional (3D) and four-dimensional (4D) printing technologies. Four-dimensional printing, a relatively new technique, has emerged as a result of the ongoing development and advancements in 3D printing. In this study, a stimulus-responsive material, N-Vinylcaprolactam-co-DEGDA (NVCL-co-DEGDA) resin, was synthesised by Stereolithography (SLA) 3D printing technique. The N-Vinylcaprolactam-co-DEGDA resins were initiated by the Diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO) photoinitiator. A range of Di(ethylene glycol) diacrylate (DEGDA) concentrations in the NVCL-co-DEGDA resin was explored, ranging from 5 wt% to 40 wt%. The structural properties of the 3D printed objects were investigated by conducting Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR-FTIR). Additionally, the 3D printed samples underwent further characterisation through differential scanning calorimetry (DSC) and swelling analysis. The results revealed an inverse relationship between DEGDA concentration and T_g values, indicating that higher concentrations of DEGDA resulted in lower T_g values. Additionally, the pulsatile swelling studies demonstrated that increasing DEGDA concentration prolonged the time required to reach the maximum swelling ratio. These findings highlight the influence of DEGDA concentration on both the thermal properties and swelling behaviour of 3D printed samples. Full article

Radiation chemistry presents a unique avenue for developing innovative polymeric materials with desirable properties, eliminating the need for chemical initiators, which can be potentially detrimental, especially in sensitive sectors like medicine. In this investigation, we employed a radiation-induced graft polymerization process with N-vinylcaprolactam (NVCL) to modify lignocellulosic membranes derived from Agave salmiana, commonly known as maguey. The membranes underwent thorough characterization employing diverse techniques, including contact angle measurement, degree of swelling, scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier-transform infrared-attenuated total reflectance spectroscopy (FTIR-ATR), nuclear magnetic resonance (CP-MAS ¹³C-NMR), X-ray photoelectron spectroscopy (XPS), and uniaxial tensile mechanical tests. The membranes’ ability to load and release an antimicrobial glycopeptide drug was assessed, revealing significant enhancements in both drug loading and sustained release. The grafting of PNVCL contributed to prolonged sustained release by decreasing the drug release rate at temperatures above the LCST. The release profiles were analyzed using the Higuchi, Peppas–Sahlin, and Korsmeyer–Peppas models, suggesting a Fickian transport mechanism as indicated by the Korsmeyer–Peppas model. Full article

From the examples of three and four-component polymer–polymer systems characterized by amorphous separation, an original technique for determining the pair parameters of interaction between components based on the sorption isotherms of common solvent vapor, particularly water vapor, has been developed. The possibility of calculating thermodynamic characteristics of multicomponent polymer compositions with specific interactions of functional groups from experimentally obtained sorption isotherms is shown. An algorithm for calculating pair interaction parameters, estimating concentration dependences of chemical potential and Gibbs free energy of mixing, and predicting the phase state of polymer mixtures was presented for the first time for such systems. The technique was tested on the example of systems poly(N-vinylpyrrolidone) (PNVP)–polyethylene glycol (PEG), PNVP–PEG–Poly(acrylic acid) (PAA), poly(N-vinylcaprolactam) (PNVCL)–PEG, and polyvinyl alcohol (PVA)–PEG. Full article

Frontiers in theranostics are driving the demand for multifunctional nanoagents. Upconversion nanoparticle (UCNP)-based systems activated by near-infrared (NIR) light deeply penetrating biotissue are a powerful tool for the simultaneous diagnosis and therapy of cancer. The intercalation into large polymer micelles of poly(maleic anhydride-alt-1-octadecene) provided the creation of biocompatible UCNPs. The intrinsic properties of UCNPs (core@shell structure NaYF₄:Yb³⁺/Tm³⁺@NaYF₄) embedded in micelles delivered NIR-to-NIR visualization, photothermal therapy, and high drug capacity. Further surface modification of micelles with a thermosensitive polymer (poly-N-vinylcaprolactam) exhibiting a conformation transition provided gradual drug (doxorubicin) release. In addition, the decoration of UCNP micelles with Ag nanoparticles (Ag NPs) synthesized in situ by silver ion reduction enhanced the cytotoxicity of micelles at cell growth temperature. Cell viability assessment on Sk-Br-3, MDA-MB-231, and WI-26 cell lines confirmed this effect. The efficiency of the prepared UCNP complex was evaluated in vivo by Sk-Br-3 xenograft regression in mice for 25 days after peritumoral injection and photoactivation of the lesions with NIR light. The designed polymer micelles hold promise as a photoactivated theranostic agent with quattro-functionalities (NIR absorption, photothermal effect, Ag NP cytotoxicity, and Dox loading) that provides imaging along with chemo- and photothermal therapy enhanced with Ag NPs. Full article

Poly (N-vinylcaprolactam) is a polymer that is biocompatible, water-soluble, thermally sensitive, non-toxic, and nonionic. In this study, the preparation of hydrogels based on Poly (N-vinylcaprolactam) with diethylene glycol diacrylate is presented. The N-Vinylcaprolactam-based hydrogels are synthesised by using a photopolymerisation technique using diethylene glycol diacrylate as a crosslinking agent, and Diphenyl (2, 4, 6-trimethylbenzoyl) phosphine oxide as a photoinitiator. The structure of the polymers is investigated via Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy. The polymers are further characterised using differential scanning calorimetry and swelling analysis. This study is conducted to determine the characteristics of P (N-vinylcaprolactam) with diethylene glycol diacrylate, including the addition of Vinylacetate or N-Vinylpyrrolidone, and to examine the effects on the phase transition. Although various methods of free-radical polymerisation have synthesised the homopolymer, this is the first study to report the synthesis of Poly (N-vinylcaprolactam) with diethylene glycol diacrylate by using free-radical photopolymerisation, using Diphenyl (2, 4, 6-trimethylbenzoyl) phosphine oxide to initiate the reaction. FTIR analysis shows that the NVCL-based copolymers are successfully polymerised through UV photopolymerisation. DSC analysis indicates that increasing the concentration of crosslinker results in a decrease in the glass transition temperature. Swelling analysis displays that the lower the concentration of crosslinker present in the hydrogel, the quicker the hydrogels reach their maximum swelling ratio. Full article