Search Results (460)

Sea ice concentration (SIC) is crucial to the global climate. In this study, a new single-channel SIC retrieval algorithm utilizing spaceborne L-band brightness temperature (TB) measurements is developed based on a microwave radiative transfer model. Additionally, its four uncertainties are quantified and constrained: (1) variations in seawater reference TB under warm water conditions, (2) variations in sea ice reference TB under extremely low-temperature conditions, (3) the freeze–thaw dynamics of sea ice captured by Diurnal Amplitude Variation (DAV) signals, and (4) Land mask imperfections. It is found that DAV has the most pronounced effect: eliminating its influence reduces RMSE from 10.51% to 8.43%, increases R from 0.92 to 0.94, and minimizes Bias from -0.68 to 0.13. Suppressing all four uncertainties lowers RMSE to 7.42% (a 3% improvement). Furthermore, the algorithm exhibits robust agreement with the seasonal variability of SSM/I SIC, with R mostly exceeding 0.9, RMSE mostly below 10%, and Biases mostly within 5% throughout the year. Compared to ship-based and SAR SIC data, the new L-band algorithm’s Bias and RMSE are only 2% and 2% (ship-based)/2% and 1% (SAR) higher, respectively, than those of the SSM/I product. Future algorithms can integrate the DAV signal more effectively to better understand sea ice freeze–thaw processes and ice-atmosphere interactions. Full article

LuTan-1(LT-1) is the first Chinese civil L-band satellite constellation for geohazard observation, comprising LT-1A and LT-1B satellites. By employing interferometric altimetry and differential deformation measurement technologies, it achieves high-precision topographic mapping and establishes sub-millimeter-level deformation monitoring capabilities. To meet the high-precision measurement requirements for applications such as topographic surveying and deformation monitoring, this study systematically evaluates four categories of image quality metrics—geometric, radiometric, and polarimetric characteristics, as well as orbital and baseline quality—based on in-orbit test data from the twin satellites. The test results demonstrate that all image quality indicators of the LT-1 SAR satellites meet the design specifications, confirming that the imagery can provide robust spatial technical support for applications including geological hazard monitoring, land resource investigation, earthquake assessment, disaster prevention and mitigation, fundamental surveying and mapping, and forestry monitoring. Full article

The caldén (Neltuma caldenia) forest, a xerophytic low-stature ecosystem in central Argentina, faces increasing threats from land use change and desertification. This study assesses the capability of full-polarimetric L-band SAR data from the Argentine SAOCOM-1A satellite to characterise forest attributes in this ecosystem. We computed the Generalised Radar Vegetation Index (GRVI) and compared it with aboveground biomass and tree canopy cover data from the Second National Forest Inventory, under fire and non-fire conditions. We also assessed other SAR indices and polarimetric decompositions. GRVI values exhibited limited variability relative to the broad range of field-estimated biomass, and most regression models were not statistically significant. Nevertheless, GRVI effectively distinguished woody from non-woody vegetation and showed a weak correlation with canopy cover. Statistically significant, albeit weak, correlations were also observed between biomass and specific polarimetric components, such as the helix term of the Yamaguchi decomposition and the Pauli volume component. Key challenges included limited spatial and temporal coverage of SAOCOM-1A data and the distribution of field plots. Despite these limitations, our results support the use of GRVI for land cover monitoring in semiarid regions, emphasising the importance of multitemporal data, integration with C-band SAR, and enhanced field sampling to improve forest attribute modelling. Full article

Surface soil moisture (SSM) is a critical indicator of crop growth conditions, and its accurate retrieval is essential for agricultural monitoring. Integrating multispectral and microwave remote sensing data can enhance SSM estimation, but discrepancies among platforms often reduce accuracy at local scales. In this study, we fused Sentinel-2 and UAV multispectral images through resampling to generate fusion data, which were then combined with miniature synthetic aperture radar (MiniSAR) data. A modified water cloud model (WCM) was applied to mitigate vegetation effects on radar backscattering coefficients. Three machine learning algorithms—random forest (RF), extreme gradient boosting (XGBoost), and extreme learning machine (ELM)—were employed to retrieve SSM. Field measurements at two depths (0–10 cm and 0–20 cm) over winter wheat fields in Xunxian, Hebi City, Henan Province, China, were used for validation. Results showed the following: (1) Fused multispectral data improved retrieval accuracy compared with single-satellite data, with the best configuration (fused data + VV + RF) achieving an R² of 0.85 and an RMSE of 1.51% at 0–10 cm. (2) At 0–20 cm, the fused data combined with VV polarization and XGBoost achieved the best performance (R² = 0.67, RMSE = 2.61%). (3) ELM exhibited the largest accuracy improvement after incorporating fused data, with R² increases up to 0.40 and RMSE reductions up to 18.24%. These results demonstrate the strong potential of multi-platform multispectral fusion combined with MiniSAR data for improving field-scale SSM retrieval in winter wheat regions. Full article

In the semi-desert aeolian sand areas of Northern China, surface deformation monitoring with SAR is challenged by loss of coherence due to mobile dunes, seasonal vegetation changes, and large-gradient, nonlinear subsidence from underground mining. This study utilizes PALSAR-2 (L-band, 3 m resolution) and Sentinel-1 (C-band, 30 m resolution) data, applying InSAR and Offset tracking methods combined with differential, Stacking, and SBAS techniques to analyze deformation monitoring effectiveness and propose an efficient dynamic monitoring strategy for the Shendong Coalfield. The main conclusions can be summarized as follows: (1) PALSAR-2 data, which has advantages in wavelength and resolution (L-band, multi-look spatial resolution of 3 m), exhibits better interference effects and deformation details compared to Sentinel-1 data (C-band, multi-look spatial resolution of 30 m). The highly sensitive differential-InSAR (D-InSAR) can promptly detect new deformations, while Stacking-InSAR can accurately delineate the range of rock strata movement. SBAS-InSAR can reflect the dynamic growth process of the deformation range as a whole, and SBAS-Offset is suitable for observing the absolute values and morphology of the surface moving basin. The combined application of Stacking-InSAR and Stacking-Offset methods can accurately acquire the three-dimensional deformation field of mining-induced strata movement. (2) The spatiotemporal process of surface deformation caused by coal mining-induced strata movement revealed by InSAR exhibits good correspondence with both the underground mining progress and the development of ground fissures identified in UAV images. (3) The maximum displacement along the line of sight (LOS) measured in the mining area is approximately 2 to 3 m, which is close to the 2.14 m observed on site and aligns with previous studies. The calculated advance influence angle of the No. 22308 working face in the study area is about 38.3°. The influence angle on the solid coal side is 49°, while that on the goaf side approaches 90°. These findings further deepen the understanding of rock movement and surface displacement parameters in this region. The dynamic monitoring strategy proposed in this study is cost-effective and operational, enhancing the observational effectiveness of InSAR technology for surface deformation due to coal mining in this area, and it enriches the understanding of surface strata movement patterns and parameters in this region. Full article

LuTan-1 (LT-1) is China’s first L-band differential interferometric synthetic aperture radar system, comprising two multi-polarization SAR satellites, LT-1A and LT-1B. The satellite uses differential deformation measurement and interferometric altimetry technology to realize surface deformation monitoring and topographic mapping in designated areas. It has the characteristics of all-weather, all-time, and multi-polarization and can be applied to military and civilian fields. In order to further improve the accuracy of image geometric positioning, this paper analyzes the error sources of geometric positioning for the differential deformation measurement mode (strip 1) of the satellite service. The in-orbit data of three years since the launch (2022–2024) are selected to analyze the positioning accuracy and stability of the uncontrolled plane based on the corner reflector and active calibrator deployed in the calibration field. The experimental results show that the positioning accuracy of the satellite strip 1 image without a control plane meets the requirements of the in-orbit index and remains relatively stable. The geometric precision correction positioning accuracy after error source compensation is better than 3.0 m, providing a favorable support for the subsequent application. Full article

Soil organic carbon (SOC) is a critical component of soil health, influencing soil structure, soil water retention capacity, and nutrient cycling while playing a key role in the global carbon cycle. Accurate SOC estimation over croplands is essential for sustainable land management and climate change mitigation. This study explores a novel approach to SOC estimation using multi-frequency synthetic aperture radar (SAR) data, specifically Sentinel-1 and ALOS-2/PALSAR-2 imagery, combined with advanced machine learning techniques for cropland SOC estimation. Diverse agricultural practices, with major crop types such as rice (Oryza sativa), finger millet (Eleusine coracana), Niger (Guizotia abyssinica), maize (Zea mays), and vegetable cultivation, characterize the study region. By integrating C-band (Sentinel-1) and L-band (ALOS-2/PALSAR-2) SAR data with key polarimetric features such as the C2 matrix, entropy, and degree of polarization, this study enhances SOC estimation. These parameters help distinguish variations in soil moisture, texture, and mineral composition, reducing their confounding effects on SOC estimation. An ensemble model incorporating Random Forest (RF) and neural networks (NNs) was developed to capture the complex relationships between SAR data and SOC. The NN component effectively models complex non-linear relationships, while the RF model helps prevent overfitting. The proposed model achieved a correlation coefficient (r) of 0.64 and a root mean square error (RMSE) of 0.18, demonstrating its predictive capability. In summary, our results offer an efficient approach for enhanced SOC mapping in diverse agricultural landscapes, with ongoing work targeting challenges in data availability to facilitate large-scale SOC mapping. Full article

Coastal wetlands are a critical buffer between land and water that are threatened by land use and climate change, necessitating improved monitoring for management and resilience planning. The recently launched NASA-ISRO L- and S-band SAR satellite (NISAR) will provide regular collections of fully polarimetric SAR imagery over the Great Lakes, allowing for unprecedented remote monitoring of the large expanses of coastal wetlands in the region. Prior research with polarimetric C-band SAR showed inconsistencies with common polarimetric analysis techniques, including the erroneous misattribution of double-bounce scattering in three-component scattering models. To prepare for NISAR and determine whether SAR-based coastal wetland analysis methods established with the C-band are applicable to the L- and S-bands, the NASA-ISRO airborne system (ASAR) collected imagery over western Lake Erie and Lake St. Clair coincident with a field data collection campaign. ASAR data were analyzed to identify common Great Lakes coastal wetland vegetation species, assess the extent of inundation, and derive biomass retrieval algorithms. Co-polarized phase difference histograms were also analyzed to assess the validity of three-component scattering decompositions. The L- and S-bands allowed for the production of wetland type maps with high accuracies (92%), comparable to those produced using a fusion of optical and SAR data. Both frequencies could assess the extent of flooded vegetation, with the S-band correctly identifying inundated vegetation at a slightly higher rate than the L-band (83% to 78%). Marsh vegetation biomass retrieval algorithms derived from L-band data had the best correlation with field data (R² = 0.71). Three component scattering models were found to misattribute double-bounce scattering at incidence angles shallower than 35°. The L- and S-band results were compared with satellite RADARSAT-2 imagery collected close to the ASAR acquisitions. This study provides an advanced understanding of polarimetric SAR for monitoring wetlands and provides a framework for utilizing forthcoming NISAR data for effective monitoring. Full article

Over the last decade, L-band synthetic aperture radar (SAR) satellite data has become more widely available globally, providing new opportunities for biodiversity and ecosystem services (BES) monitoring. To better understand these opportunities, we conducted a systematic scoping review of articles that utilized L-band synthetic aperture radar (SAR) satellite data for BES monitoring. We found that the data have mainly been analyzed using image classification and regression methods, with classification methods attempting to understand how the extent, spatial distribution, and/or changes in different types of land use/land cover affect BES, and regression methods attempting to generate spatially explicit maps of important BES-related indicators like species richness or vegetation above-ground biomass. Random forest classification and regression algorithms, in particular, were used frequently and found to be promising in many recent studies. Deep learning algorithms, while also promising, have seen relatively little usage thus far. PALSAR-1/-2 annual mosaic data was by far the most frequently used dataset. Although free, this data is limited by its low temporal resolution. To help overcome this and other limitations of the existing L-band SAR datasets, 64% of studies combined them with other types of remote sensing data (most commonly, optical multispectral data). Study sites were mainly subnational in scale and located in countries with high species richness. Future research opportunities include investigating the benefits of new free, high temporal resolution L-band SAR datasets (e.g., PALSAR-2 ScanSAR data) and the potential of combining L-band SAR with new sources of SAR data (e.g., P-band SAR data from the “Biomass” satellite) and further exploring the potential of deep learning techniques. Full article

The rugged terrain and dense vegetation in the mountainous area of Luding after the strong earthquake have made geologic hazards hidden and difficult to verify, and there are limitations in the fine-resolution monitoring of small-scale landslides, especially in the area covered by high vegetation. Currently, there is a lack of research on the application of L-band LuTan-1 (LT-1) for landslide detection in the dense vegetation-covered area of the Luding strong earthquake zone, and it is necessary to carry out the analysis of the detection capability of LT-1 for small-scale landslide hazards under the complex terrain and dense vegetation area. In this study, the Stacking-InSAR method was employed using LT-1 and Sentinel-1 satellites to conduct deformation monitoring and landslide detection in the Luding seismic area and to investigate the small-scale landslide detection capability of LT-1 in vegetation-covered areas. The results show that LT-1 and Sentinel-1 identified 23 landslide hazards, and their obvious deformation and landslide characteristics indicate that they are still in an unstable state with a continuous deformation trend. At the same time, through the detection analysis of LT-1’s landslide detection capability under high vegetation cover and small-scale landslide detection capability, the results show that the long wavelength LT-1 can be more effective in landslide hazard identification and monitoring than the short wavelength, and LT-1 with high spatial resolution can be more refined to depict the landslide deformation characteristics in space, which demonstrates the great potential of LT-1 in the refinement of landslide detection. It shows the significant potential of the LT-1 satellite data in landslide detection. Finally, the effects of geometric distortion on landslide detection under different satellite orbits are analyzed, and it is necessary to adopt the combined monitoring method of elevating and lowering orbits for landslide detection to ensure the integrity and reliability of landslide detection. This study highlights the capability of the LT-1 satellite in monitoring landslides in complex mountainous terrain and underscores its potential for detecting small-scale landslides. The findings also offer valuable insights for future research on landslide detection using LT-1 data in similar challenging environments. Full article

Burned area detection plays a critical role in assessing the impact of forest and land fires, particularly in Indonesia, where both peatland and non-peatland areas are increasingly affected. Optical remote sensing has been widely used for this task, but its effectiveness is limited by persistent cloud cover in tropical regions. A Synthetic Aperture Radar (SAR) offers a cloud-independent alternative for burned area mapping. This study investigates the performance of a Stacking Ensemble Neural Network (SENN) model using polarimetric features derived from both C-band (Sentinel 1) and L-band (Advanced Land Observing Satellite—Phased Array L-band Synthetic Aperture Radar (ALOS-2/PALSAR-2)) data. The analysis covers three representative sites in Indonesia: peatland areas in (1) Rokan Hilir, (2) Merauke, and non-peatland areas in (3) Bima and Dompu. Validation is conducted using high-resolution PlanetScope imagery(Planet Labs PBC—San Francisco, California, United States). The results show that the SENN model consistently outperforms conventional artificial neural network (ANN) approaches across most evaluation metrics. L-band SAR data yields a superior performance to the C-band, particularly in peatland areas, with overall accuracy reaching 93–96% and precision between 92 and 100%. The method achieves 76% accuracy and 89% recall in non-peatland regions. Performance is lower in dry, hilly savanna landscapes. These findings demonstrate the effectiveness of the SENN, especially with L-band SAR, in improving burned area detection across diverse land types, supporting more reliable fire monitoring efforts in Indonesia. Full article

Forest fires, intensified by climate change, threaten tropical ecosystems by accelerating biodiversity loss, releasing carbon emissions, and altering hydrological cycles. Continuous detection of fire-induced forest loss is therefore critical. However, commonly used optical-based methods often face limitations, particularly due to cloud cover and coarse spatial resolution. This study explores the use of C-band Sentinel-1 Synthetic Aperture Radar (SAR) time series, combined with Bayesian Online Changepoint Detection (BOCD), for detecting and continuously monitoring fire-induced vegetation loss in forested areas. Three BOCD variants are evaluated: two single-polarization approaches individually using VV and VH reflectivities, and a dual-polarization approach ($pol$-BOCD) integrating both channels. The analysis focuses on a fire-affected area in Baixo Uraim (Paragominas, Brazil), supported by field-validated reference data. BOCD performance is compared against widely used optical products, including MODIS and VIIRS active fire and burned area data, as well as Sentinel-2-based difference Normalized Burn Ratio (dNBR) assessments. Results indicate that $pol$-BOCD achieves spatial accuracy comparable to dNBR (88.2% agreement), while enabling detections within a delay of three Sentinel-1 acquisitions. These findings highlight the potential of SAR-based BOCD for rapid, cloud-independent monitoring. While SAR enables continuous detection regardless of atmospheric conditions, optical imagery remains essential for characterizing the type and severity of change. Full article

Snow water equivalent (SWE) can be estimated using Differential SAR Interferometry (DInSAR), which captures changes in snow depth and density between two SAR acquisitions. However, challenges arise due to SAR signal penetration into the snowpack and the intrinsic limitations of DInSAR measurements. This study addresses these issues and explores the use of multi-band SAR data to derive SWE maps in alpine regions characterized by steep terrain, small spatial extent, and a potentially heterogeneous snowpack. We first conducted a performance analysis to assess SWE estimation precision and the maximum unambiguous SWE variation, considering incidence angle, wavelength, and coherence. Based on these results, we selected C-band Sentinel-1 and L-band SAOCOM data acquired over alpine areas and applied tailored DInSAR processing. Atmospheric artifacts were corrected using zenith total delay maps from the GACOS service. Additionally, sensitivity maps were generated for each interferometric pair to identify pixels suitable for reliable SWE estimation. A comparative analysis of the C- and L-band results revealed several critical issues, including significant atmospheric artifacts, phase decorrelation, and phase unwrapping errors, which impact SWE retrieval accuracy. A comparison between our Sentinel-1-based SWE estimations and independent measurements over an instrumented site shows results fairly in line with previous works exploiting C-band data, with an RSME in the order of a few tens of mm. Full article

Validating the potential of multi-frequency synthetic aperture radar (SAR) data for multi-layer and profile soil moisture (SM) estimation modeling, we conducted an airborne multi-frequency SAR joint observation experiment (AMFSEX) over the Liao River Basin in China. The experiment simultaneously acquired airborne high spatial resolution quad-polarization (quad-pol) SAR data at five frequencies, including the Ka-, X-, C-, S-, and L-band. A preliminary “vegetation–soil” parameter estimation model based on the multi-frequency SAR data was established. Theoretical penetration depths of the multi-frequency SAR data were analyzed using the Dobson empirical model and the Hallikainen modified model. On this basis, a water cloud model (WCM) constrained by multi-polarization weighted and penetration depth weighted parameters was used to analyze the estimation accuracy of the multi-layer and profile SM (0–50 cm depth) under different vegetation types (grassland, farmland, and woodland). Overall, the estimation error (root mean square error, RMSE) of the surface SM (0–5 cm depth) ranged from 0.058 cm³/cm³ to 0.079 cm³/cm³, and increased with radar frequency. For multi-layer and profile SM (3 cm, 5 cm, 10 cm, 20 cm, 30 cm, 40 cm, 50 cm depth), the RMSE ranged from 0.040 cm³/cm³ to 0.069 cm³/cm³. Finally, a multi-input multi-output regression model (Gaussian process regression) was used to simultaneously estimate the multi-layer and profile SM. For surface SM, the overall RMSE was approximately 0.040 cm³/cm³. For multi-layer and profile SM, the overall RMSE ranged from 0.031 cm³/cm³ to 0.064 cm³/cm³. The estimation accuracy achieved by coupling the multi-source data (multi-frequency SAR data, multispectral data, and soil parameters) was superior to that obtained using the SAR data alone. The optimal SM penetration depth varied across different vegetation cover types, generally falling within the range of 10–30 cm, which holds true for both the scattering model and the regression model. This study provides methodological guidance for the development of multi-layer and profile SM estimation models based on the multi-frequency SAR data. Full article

Machine learning (ML) has gained significant attention for unraveling the complex, nonlinear relationships between soil moisture (SM) and various predictive variables, including remote sensing (RS; reflectance, brightness temperature, backscatter coefficients) and biophysical (topographic, soil, vegetation, and weather) variables. We reviewed the literature to extract and synthesize ML algorithms, reliable input features, and challenges in SM estimation using RS data. We analyzed results from 144 articles published from 2010 to 2024. Random forest (40 out of 67 studies), support vector regressor (13 out of 39 studies), and artificial neural networks (12 out of 27 studies) often outperformed other algorithms to estimate SM using RS datasets. Multi-source RS data often outperformed single-source data in SM estimation. Satellite-derived features, such as vegetation indices and backscattering coefficients, provided critical information on surface SM (SSM) variability to estimate SSM. For root zone SM estimation, soil properties and SSM generally were more reliable predictors than surface information derived solely from RS. Two recent advances—the use of semi-empirical models and L-band SAR to mitigate vegetation effects, and transfer learning to improve model transferability—have shown promise in addressing key challenges in SM estimation. Full article