Search Results (592)

Accurate short-horizon downlink throughput prediction is essential for automation in high-density 5G deployments (e.g., stadiums and events), where user load, scheduling decisions, and interference conditions change rapidly and produce highly variable user-perceived rates. This paper benchmarks lightweight regression models for per-user throughput prediction from readily available radio access network (RAN) key performance indicators (KPIs) and studies a risk-aware extension that augments point forecasts with calibrated uncertainty and an abstention (deferral) rule. Experiments use a strictly time-ordered train/calibration/test protocol on the Liverpool 5G High-Density Demand (L5GHDD) dataset. The target is strongly zero-inflated (about 62% of samples at 0 Mbps) and heavy-tailed, creating regimes where average-error optimization can mask rare but operationally important bursts. In the point-prediction benchmark, the best model is a tuned two-stage support vector regressor with a mean absolute error (MAE) of $0.452$ Mbps, while the strongest single-stage model attains a weighted mean absolute percentage error (WMAPE) of $56.200\%$. For uncertainty quantification, we compare standard split conformal prediction against two input-adaptive alternatives. Constant-width split conformal attains $88.900\%$ marginal coverage for a nominal 90% target with an average interval width of $2.288$ Mbps, but width-based deferral is degenerate because all intervals have the same size. Variable-length conformal intervals preserve near-nominal coverage ($91.100\%$) while producing informative width variation: normalized conformal reduces the average width to $1.344$ Mbps, and conformalized quantile regression reduces it to $0.641$ Mbps. At a deferral threshold of $1.500$ Mbps, constant-width conformal defers all samples, whereas normalized conformal still acts on $61.200\%$ of samples with selective MAE $0.219$ Mbps. These results show that input-adaptive uncertainty is necessary for meaningful selective prediction in heteroscedastic 5G throughput dynamics. Full article

Background: Green logistics requires decision-support approaches that jointly address cost efficiency, emissions reduction, service reliability, and reporting transparency under dynamic operating conditions. Existing studies often treat optimization, predictive updating, stakeholder coordination, and emissions traceability separately, limiting integration. Methods: This study develops a simulation-based integrated decision-support framework that combines multi-objective mixed-integer linear programming (MILP), machine learning-based travel-time prediction in a rolling-horizon setting, cooperative allocation using a Shapley value mechanism, and ISO 14083:2023-aligned emissions accounting. A permissioned blockchain layer is included as a post-decision governance mechanism to support traceability. The framework is evaluated using industry-calibrated synthetic scenarios over a 30-day planning horizon with 50 independent simulation runs. Results: Under the tested scenarios, the integrated configuration reduced average CO₂ emissions per route by 27.6% (±2.4%), improved the cost index by 17.3% relative to the baseline, and increased on-time delivery to 96.8%. Robustness analyses showed average key performance indicator (KPI) deviations below 5%. Component-level analysis suggests that the main operational gains arise from the interaction between predictive updating and prescriptive optimization, while the blockchain layer mainly improves auditability. Conclusions: The framework improves environmental and operational performance under the tested simulation scenarios, although real-world validation remains necessary before deployment-level conclusions can be drawn. Full article

Intelligent manufacturing requires strategic performance indicators that link shop-floor performance with productivity and sustainability goals. This study examines Overall Equipment Effectiveness (OEE) as a strategic key performance indicator and applies it to a hydraulic plastic injection-moulding machine producing an automotive component. Production data captured through a PLC-and-SQL-integrated digital monitoring system over 14 months were used to calculate monthly Availability, Performance, Quality, and OEE values and to identify the main sources of efficiency loss. The baseline period showed low OEE, driven mainly by unplanned downtime, minor stoppages, and cycle times above the 45 s target, whereas Quality remained consistently close to 100%. A diagnostic analysis combining production logs, downtime stratification, cycle-time records, and consultations with plant personnel was then used to define improvement actions. The implemented measures included preventive and predictive maintenance, process-parameter optimisation, operator training, and wider use of digital monitoring and analytics. In the post-improvement period, OEE increased markedly, downtime decreased, and cycle-time stability improved, reaching values close to world-class performance. The results confirm that OEE can function as a unifying KPI for intelligent manufacturing, supporting data-driven decision-making, continuous improvement, and more sustainable production. Full article

Artificial lighting accounts for roughly 30% of total electricity use in supermarkets and significantly affects product perception, customer experience, and purchasing behavior. Increasing the availability of natural light, combined with appropriate architectural energy retrofitting strategies, offers a major opportunity to reduce electricity demand. This study proposes a data-driven framework for evaluating energy retrofit strategies in commercial buildings, integrating Building Information Modeling (BIM) and Building Energy Modeling (BEM). A parametric methodology is used to evaluate multiple architectural retrofitting scenarios aimed at enhancing daylighting and reducing artificial lighting demand, while improving energy efficiency and environmental performance. The scenarios investigated include variations in skylight geometry and orientation, glazing type, photovoltaic integration, and advanced lighting controls. Three Key Performance Indicators (KPIs)—real energy effectiveness, lighting control performance, and environmental impact—are used to assess how design modifications influence energy use, indoor lighting quality, and environmental performance. The methodology is applied to three real food-retail buildings in Italy. Results show that lighting energy consumption can be reduced by up to 60% in scenarios combining LED technology with smart control systems, while total building electricity savings vary across case studies depending on building characteristics and usage patterns. Environmental impact reductions of approximately 15–20% are achieved, reflecting both operational and life-cycle improvements. The study demonstrates the potential of parametric architectural retrofitting to support multi-criteria decision-making for sustainable refurbishment of food-retail environments. Full article

This study examines workplace bullying within the middle-management tier of a large Gauteng-based retail organisation in South Africa, with a focus on structural organisational pressures and perceptual differences among managers. While traditional research often emphasises individual personality traits or victim demographics, this study explores how organisational conditions—particularly the “middle management squeeze” and performance-driven Key Performance Indicators (KPIs)—are reflected in workplace behaviours. Grounded in a positivist paradigm, a quantitative cross-sectional survey was conducted among a probability-based sample of 253 retail managers. Data were collected using the Negative Acts Questionnaire (NAQ-22) and analysed using Exploratory Factor Analysis (EFA) and nonparametric inferential tests. The findings indicate that task-related negative acts, such as micromanagement (M = 2.00) and persistent monitoring (M = 1.87), are frequently experienced. EFA identified two dimensions—General Harassment and Managerial Control—accounting for 62% of the total variance. Inferential results show that perceptions of General Harassment differ significantly across educational groups (p = 0.0268), whereas perceptions of Managerial Control remain consistent (p = 0.3378). These findings indicate that social forms of incivility are interpreted differently across educational cohorts, while task-related managerial practices are widely normalised. The study highlights the importance of understanding workplace bullying as both a structural and perceptual phenomenon and underscores the need for organisational interventions that address systemic pressures rather than relying solely on individual-level approaches. Full article

Nanoimprint lithography (NIL) plays an increasingly important role in modern nanomanufacturing processes, but its effective application in production conditions requires precise tools for evaluating and optimising technological processes. The aim of the study was to develop and model key performance indicators (KPIs) supporting the optimisation of the quality, stability and efficiency of nanoimprint lithography processes. As part of the selection of indicators, a literature review, surveys and in-depth interviews with industry experts were conducted, which enabled the identification of indicators relevant from a technological practice perspective. The proposed KPI classification was directly linked to the stages of the NIL process, creating a basis for operational performance control and process capability analysis. A novel aspect is the proposal of an integrated KPI model that combines the classification of indicators based on the stages of the NIL process with their direct link to technological parameters and measurable quality effects. These indicators have been linked to critical process parameters for different NIL variants, including Thermal NIL, UV-NIL, Roll-to-Roll NIL and Step-and-Repeat NIL, using a process analysis and multi-criteria optimisation approach. Research indicates that the use of an integrated KPI model improves the accuracy of nanostructure mapping, reduced defect density, and increased process efficiency without compromising technological stability. The proposed approach is a universal tool supporting NIL process control, its scaling to industrial applications, and integration with statistical process control and data-driven optimisation methods. Full article

The evolution toward sixth-generation (6G) networks envisions humans as active nodes within a fully interconnected digital ecosystem, supported by data collected from in-body and on-body sensors. Since many of these devices are not equipped to connect directly to 6G networks, Wireless Body Area Networks (WBANs) serve as an essential intermediate layer. However, conventional radio-frequency technologies face limitations in terms of energy efficiency, security, and data integrity, motivating the adoption of lightweight security mechanisms. Physical Layer Security (PLS), and in particular Physical Key Extraction (PKE), offers a promising solution by enabling legitimate devices to derive shared cryptographic keys from the reciprocal properties of the communication channel. Galvanic coupling (GC) communication has recently emerged as an on-body transmission technology alternative to radio-frequency (RF), which exploits low-power electrical signals propagating through biological tissue. Building on prior feasibility studies, this work proposes a PKE framework tailored to GC channels, integrating a lightweight key reconciliation method, based on Hamming (7,4) error-correction codes, and evaluating system performance through dedicated reliability and security Key Performance Indicators (KPIs). Results reveal a trade-off shaped by electrode placement and channel quantization parameters. Among the ones tested, the optimal configuration is achieved with a 3 cm transverse inter-electrode spacing at both transmitter and receiver, and a 3 cm longitudinal separation between transmitter and receiver, by quantizing the channel impulse response with two quantization bits. While this work focuses on validating the method in controlled conditions in order to establish a reliable study framework, future developments will focus on enhanced reconciliation, privacy amplification, and analysis of the GC channel considering physiological and environmental variations. Full article

As large scale digitization continues to reform business processes, one critical challenge organizations are currently facing is managing the staggering amount of data flowing. Further, with large datasets comes the added complexity of insuring a cyber secure environment and shielding the information security management system (ISMS) from undesirable manipulations. Today’s drastic rise of cyberattacks urges the need for effective security frameworks to guard against unauthorized access and malicious acts impeding business operations. The latter of which compelled organizations to adopt holistic information security approaches, commonly implemented via ISMS frameworks. Further, to maintain an effective ISMS, ongoing monitoring and measurements are highly required. Considering the aforementioned points, this paper explores how organizations measure the effectiveness of their ISMS focusing on key performance indicators, metrics, and foundational components involved in information security management by categorizing metrics into governance, risk, and incident response as well as determining the maturity level based on ISO alignment, the presence, specificity and automation of KPIs. Based on empirical interviews with eight diverse organizations, the research findings reveal a wide range of maturity among organizations, from those lacking clear defined KPIs to those with sophisticated multi-layered systems. While special attention is paid to incident-response management, companies with a strong ISMS stand out because they use automated and proactive metrics for strategic reporting, whereas companies with a weaker ISMS often do not have organized KPIs and depend on random manual audits. Based on these results, the present work suggests an analysis framework for evaluating ISMS effectiveness. While previous studies have struggled to define clear ISMS measurement practices, this paper aims to provide insights on measurements by identifying the core building blocks of ISMS and revealing how they are evaluated to drive continual ISMS improvement. Full article

Urban areas are increasingly exposed to water-related challenges, including flood risk and water scarcity, amplified by climate change, population growth, and extensive soil sealing. Addressing these pressures requires integrated stormwater management (SWM) strategies that balance hydraulic, environmental, and social objectives. This study introduces a novel, replicable Key Performance Indicator (KPI)-based assessment framework for 36 green–blue and grey sustainable stormwater management systems (SWMSs), designed to enable cross-typology, multiscale comparison. Six KPIs, encompassing flood regulation, water consumption, water quality, air quality, environmental amenity, and biodiversity potential, are derived through a critical synthesis and harmonisation of the literature and complemented with new parameters and sub-parameters to address existing methodological gaps. The framework structures evaluations into six analytical tables and one summary table, ensuring transparent, systematic, and comparative assessment of heterogeneous solutions. Application to a pilot project in Rome demonstrates how integrating KPI evaluation with parametric hydraulic modelling provides actionable insights for solution selection. It also facilitates identification of potential synergies between performance dimensions, enhancing its value as a decision-support tool in preliminary design. Overall, the study demonstrates the research value of multi-scalar, performance-based approaches for urban water planning, highlights the transferability of resilient stormwater strategies in climate-sensitive contexts, and identifies promising avenues for future research, including multi-sectoral integration, trade-off analysis, and cross-platform application. Full article

This study presents a comparative analysis of five gender equality certification schemes alongside the ISO 53800 standard with the aim of distilling shared conceptual foundations and design principles that can inform progress toward Sustainable Development Goal (SDG) 5 on gender equality. The comparative analysis reveals marked heterogeneity in scope, design architecture, indicators, and transparency. Methodologically, the study draws on the relevant literature, documentary evidence, and semi-structured consultations with five experts in gender equality, diversity management, auditing, and ESG reporting. Building on the most effective and robust features across gender equality schemes, the study proposes a universal framework for gender equality certification. Under this framework, an ideal universal certification model should apply the same core requirements to both public and private organizations, while including simplified procedures tailored to small- and medium-sized enterprises (SMEs). Moreover, the model should rely on a limited set of key performance indicators (KPIs), focusing on the most material dimensions and prioritizing quantitative measures. It should also strengthen employee feedback mechanisms and enhance accountability in corporate governance. The framework should also pay attention to intersectional dimensions, extend responsibility across the value chain, and address the gender-related implications of artificial intelligence (AI). Importantly, an ideal universal gender equality certification should ensure a high level of transparency through the public disclosure of certified organizations, assessment criteria, KPIs, and levels or scores achieved. Furthermore, it should be supported by a free digital self-assessment tool and robust auditing arrangements, underpinned by a sufficiently large pool of accredited certification bodies and gender-balanced audit teams. Finally, it should undergo periodic review and align with Environmental, Social, and Governance (ESG) principles and other related SDGs. Full article

The main objective of this study is to produce a systematic literature review that analyses key performance indicators (KPI) in the context of efficient and sustainable building renovation. Efficiency and sustainability, in combination with building renovation, are important themes due to the increasing need for creating sustainable renovations worldwide. The identification and monitoring of KPIs is fundamental in decision-making processes, but also in the monitoring of short-term and long-term project goals. In the current academic literature, existing research gaps, especially in the social aspects of sustainability and research, have also been analyzed in terms of regional differences in the approach to each KPI. The systematic literature review examined 29 studies published between 2014 and 2024, based on a literature search conducted in 2024, using databases such as Scopus and Web of Science, with the final search performed in June 2024. The inclusion criteria focused on peer-reviewed studies addressing KPIs in sustainable building renovation, while studies not directly related to renovation processes or lacking KPI analysis were excluded. The research results show that the majority of studies focus on economic and environmental factors, which are the most commonly addressed, while research on other KPIs is significantly behind. The results were synthesized using a qualitative comparative analysis of identified KPI categories. This study also highlights the importance of addressing effective and sustainable renovation for historic buildings with a focus on heritage preservation and the need to further analyze the use of KPIs with a focus on historic buildings. The limitations include the limited number of studies and the underrepresentation of social sustainability aspects. Full article

In increasingly complex information technology (IT) environments, the sustainable governance of business processes requires systematic alignment between strategic intent, operational performance and long-term organizational resilience. Business Process Model and Notation (BPMN) provides a structured foundation for modeling IT workflows, while Service Level Agreements (SLAs) and key performance indicators (KPIs) formalize performance accountability. However, escalating process interdependencies and performance constraints challenge traditional managerial oversight. This study proposes a simulation-based analytical framework for SLA-aware BPMN process governance aimed at enhancing sustainable digital operations. In this context, sustainability is operationally defined as the capacity of IT business processes to consistently meet SLA-defined performance thresholds—including availability and response times—under varying workload conditions, while remaining adaptable to role reconfigurations and resilient to performance degradation over time. The methodology extends an established MATLAB/Octave modeling foundation through a MATLAB Simulink simulation tool that enables scenario testing, performance analysis and structured evaluation of role configurations under varying workload conditions. Within this framework, Artificial Intelligence (AI) is also examined as an enabling mechanism that supports performance role transformation, either augmenting human actors or operating as autonomous process agents. Rather than positioning AI as a standalone solution, the study evaluates its contribution to process responsiveness and governance efficiency within a controlled simulation context. By integrating simulation-driven decision support with performance-oriented process management, the proposed approach advances sustainable digital governance through improved reliability, adaptability and role reconfiguration. The framework provides IT managers with a structured methodology for safeguarding long-term process sustainability. The developed simulation environment is provided as Supplementary Material. Full article

Background/Objectives: To quantify end-to-end timeliness of the blood culture (BC) diagnostic workflow over one month using operational key performance indicators (KPIs)—transportation time (TT), time to detection (TTD), time to preliminary report (TTPR), and time to antimicrobial susceptibility testing (AST; TTAST)—and to identify actionable bottlenecks. Methods: This retrospective observational analysis included BC bottles processed between 29 September and 29 October 2023 at a large tertiary-care hospital in Italy. KPIs were computed from laboratory information system (LIS) timestamps and structured observations and were summarized as medians (interquartile range [IQR]). Results: 44.7% (2290/5121) of bottles reached the laboratory within 2 h (median 2.2 h, IQR 1.3–3.7), suggesting pre-analytical delays. Among adult bottles (n = 4995), 68.9% were underfilled (<8 mL), 12.9% met the 8–10 mL target, and 18.2% were overfilled (>10 mL). There were 932 positive bottles (18.2%), with a nocturnal peak in instrument flags despite reduced staffing. Median TTD was 12.6 h (IQR 8.9–18.4), with earlier detection for Gram-negatives than Gram-positives and yeasts (11.9, 14.5, and 30.9 h). In bacterial-positive bottles with complete timestamps (n = 294), median TTPR was 3.8 h (IQR 1.7–8.8); median TTAST was 19.2 h (IQR 14.3–27.8). From collection, median times were 17.9 h (IQR 14.2–23.1) to the preliminary report and 36.0 h (IQR 28.8–48.7) to the AST result. Conclusions: Within-laboratory steps were generally rapid, whereas transport planning and collection volumes emerged as major bottlenecks. Targeted interventions—enforcing ≤2 h TT and training to achieve an 8–10 mL fill—should further improve BC turnaround time. Full article

Digitalisation is transforming organisational practices, making digital readiness essential for strategic planning. However, customised digital maturity tools for the Irish Architecture, Engineering, Construction, and Operations (AECO) sector remain limited. This paper presents the development and validation of a Digital Maturity Gap Analysis Toolkit (DMGAT) for the Irish AECO sector. The toolkit assesses digital maturity across three dimensions—people, process and culture; technology; and policy and governance—covering 16 sub-dimensions and 69 assessment questions. Unlike existing tools such as the BIM Maturity Matrix, VDC BIM Scorecard, and Maturity Scan, the DMGAT uniquely integrates ISO 19650 maturity stages with a comprehensive maturity level matrix across three key dimensions, offering a customised, industry-specific assessment for the Irish AECO sector that combines structured benchmarking with actionable gap analysis. The toolkit supports gap analysis by comparing an organisation’s current maturity profile with the detailed descriptors of higher maturity levels (maturity level matrix), thereby enabling prioritised and context-specific improvement planning rather than pursuit of a uniform maximum level. The study uses a mixed-methods approach within a Design Science Research (DSR) framework, developing the tool across six phases: literature review, defining dimensions and key performance indicators (KPIs), prototype development, testing, refining and finalisation, and deployment for practical application and empirical evaluation within real organisational contexts in the Irish AECO sector, demonstrating its use as an operational diagnostic and learning tool. Alpha testing by the organisational research team refined structural enhancements including maturity stages, KPIs, and maturity matrix. Beta testing with 20 Irish AECO organisations confirmed the toolkit’s relevance, scope, and coverage. Participants highlighted its clarity and industry alignment, while suggesting minor improvements in wording, visuals, and support materials. This study concludes that DMGAT is a useful resource for informed decision-making and digital innovation in the Irish AECO sector. Full article

The deployment of distributed renewable energy systems at the neighborhood scale is a key lever for urban decarbonization. In Europe, the regulatory framework now enables collective self-consumption, allowing multiple end-users to share locally produced energy. However, the complexity and early-stage uncertainties of such projects, especially in new district development, pose challenges for feasibility assessment and investor confidence. This study proposes a method to identify the impact of numerous technical, economic, and social parameters that may affect the feasibility of a project and that are uncertain at the early design stage, across multiple key performance indicators, thus addressing the concerns of various stakeholders. A key objective is to provide an integrated method applicable during the early stages of district development, when the integration of a collective self-consumption scheme is under consideration. The developed tools and methods are compatible with the available data at this stage and provide a basis for multi-criteria analysis. The simulation workflow was built around URBANopt and enhanced with probabilistic occupancy modeling, energy sharing mechanisms, and financial analysis modules. It was further complemented by sensitivity and risk analysis layers. The method was applied to a pre-design case study, illustrating how key design and operational uncertainties influence project viability. The results showed that despite the uncertainties on a wide array of parameters, reliable risk assessment per KPI could be performed on only a handful of parameters, which were identified through a sensitivity analysis using the Morris screening method. Full article