Search Results (22)

The killer systems of S. cerevisiae are defined by the co-infection of two viral agents, an M virus and a helper virus. Each killer toxin is determined by the type of M virus (ScV-M1, ScV-M2, ScV-M28, and ScV-Mlus), which encodes a specific toxin (K1, K2, K28, and Klus). Since their discovery, interest in their potential use as antimicrobial agents has driven research into the mechanisms of action of these toxins on susceptible cells. This review provides an overview of the key aspects of killer toxins, including their origin and the evolutionary implications surrounding the viruses involved in the killer system, as well as their potential applications in the biomedical field and as a biological control strategy. Special attention is given to the mechanisms of action described to date for the various S. cerevisiae killer toxins. Full article

This study investigates the performance of isotropic and anisotropic diffuse models to estimate the total solar energy received on flat-plate collectors fixed on dual-axis trackers. These estimations are applied at twelve sites selected in both hemispheres with different terrain and environmental conditions. The diffuse (or transposition) models used in this study are the isotropic Liu-Jordan (L&J), Koronakis (KOR), Badescu (BAD), and Tian (TIA), and the anisotropic Hay (HAY), Reindl (REI), Klucher (KLU), Skartveit and Olseth (S&O), and Steven and Unsworth (S&U). These models were chosen because of their simplicity in the calculations and minimum number of input values. The results show that a single transposition model is not efficient for all sites; therefore, the most appropriate models are selected for each site under all, clear, intermediate, and overcast conditions in skies. On the other hand, an increase in the ground albedo in the vicinity of the solar installation can increase the annual inclined solar availability on a two-axis tracker by at least 9% on average. Further, a linear dependence of the annual inclined solar energy on the variation of the ground albedo was found. Also, a linear relationship exists between the annual diffuse-fraction and cloud-modification factor values at the 12 sites. Full article

Hundred-seed weight (HSW) and reproductive period length (RPL) are two major agronomic traits critical for soybean production and adaptation. However, both traits are quantitatively controlled by multiple genes that have yet to be comprehensively elucidated due to the lack of major genes; thereby, the genetic basis is largely unknown. In the present study, we conducted comprehensive genome-wide association analyses (GWAS) of HSW and RPL with multiple sets of accessions that were phenotyped across different environments. The large-scale analysis led to the identification of sixty-one and seventy-four significant QTLs for HSW and RPL, respectively. An ortholog-based search analysis prioritized the most promising candidate genes for the QTLs, including nine genes (TTG2, BZR1, BRI1, ANT, KLU, EOD1/BB, GPA1, ABA2, and ABI5) for HSW QTLs and nine genes (such as AGL8, AGL9, TOC1, and COL4) and six known soybean flowering time genes (E2, E3, E4, Tof11, Tof12, and FT2b) for RPL QTLs. We also demonstrated that some QTLs were targeted during domestication to drive the artificial selection of both traits towards human-favored traits. Local adaptation likely contributes to the increased genomic diversity of the QTLs underlying RPL. The results provide additional insight into the genetic basis of HSW and RPL and prioritize a valuable resource of candidate genes that merits further investigation to reveal the complex molecular mechanism and facilitate soybean improvement. Full article

A rising incidence of clinical infections has been caused by Kluyvera, a significant opportunistic pathogen. Meanwhile, Kluyvera acts as an important reservoir of bla_CTX-Ms, which are the dominant genes of class A extended-spectrum β-lactamases (ESBLs). In this work, 60 strains of Kluyvera were subjected to phylogenetic relationship reconstruction, antimicrobial susceptibility testing, and antibiotic resistance genes prediction. All mature bla_CTX-Ms were gathered to perform subgroup reclassification. The findings demonstrate that Kluyvera has a large gene pool with significant genetic flexibility. Notably, 25% of strains showed simultaneous detection of ESBLs and carbapenem resistance genes. The genotypes of fourteen novel bla_CTX-Ms were identified. A new subgroup classification approach for bla_CTX-Ms was defined by using 20 amino acid site variants, which could split bla_CTX-Ms into 10 subgroups. The results of the subgroup division were consistent with the phylogenetic clustering. More significantly, we proposed a novel bla_CTX-M subgroup, KLUS, that is chromosomally encoded in K. sichuanensis and the new species put forward in this study, showing amino acid differences from the currently known sequences. Cloning and transformation tests demonstrated that the recipient bacteria had a robust phenotype of cefotaxime resistance. Closely related Kluyvera species had bla_CTX-Ms in the same subgroup. Our research lays the groundwork for a deeper comprehension of Kluyvera and emphasizes how important a bla_CTX-M reservoir it is. We provide an update on bla_CTX-M subgroups reclassification from the aspects of phylogenetic relationship, amino acid differences, and the new subgroup KLUS, which needs to be strengthen monitored due to its strong resistance phenotype to cefotaxime. Full article

Tribocorrosion, a research field that has been evolving for decades, has gained renewed attention in recent years, driven by increased demand for wear- and corrosion-resistant materials from biomedical implants, nuclear power generation, advanced manufacturing, batteries, marine and offshore industries, etc. In the United States, wear and corrosion are estimated to cost nearly USD 300 billion per year. Among various important structural materials, passive metals such as aluminum alloys are most vulnerable to tribocorrosion due to the wear-accelerated corrosion as a result of passive film removal. Thus, designing aluminum alloys with better tribocorrosion performance is of both scientific and practical importance. This article reviews five decades of research on the tribocorrosion of aluminum alloys, from experimental to computational studies. Special focus is placed on two aspects: (1) The effects of alloying and grain size on the fundamental wear, corrosion, and tribocorrosion mechanisms; and (2) Alloy design strategies to improve the tribocorrosion resistance of aluminum alloys. Finally, the paper sheds light on the current challenges faced and outlines a few future research directions in the field of tribocorrosion of aluminum alloys. Full article

Wnt/β-catenin (WβC) signaling pathway is an important signaling pathway for the maintenance of cellular homeostasis from the embryonic developmental stages to adulthood. The canonical pathway of WβC signaling is essential for neurogenesis, cell proliferation, and neurogenesis, whereas the noncanonical pathway (WNT/Ca²⁺ and WNT/PCP) is responsible for cell polarity, calcium maintenance, and cell migration. Abnormal regulation of WβC signaling is involved in the pathogenesis of several neurodegenerative diseases such as Alzheimer’s disease (AD), Parkinson’s disease (PD), Huntington’s disease (HD), amyotrophic lateral sclerosis (ALS), multiple sclerosis (MS), and spinal muscular atrophy (SMA). Hence, the alteration of WβC signaling is considered a potential therapeutic target for the treatment of neurodegenerative disease. In the present review, we have used the bibliographical information from PubMed, Google Scholar, and Scopus to address the current prospects of WβC signaling role in the abovementioned neurodegenerative diseases. Full article

Contingency analysis plays an important role in assessing the static security of a network. Its purpose is to check whether a system can operate safely when some elements are out of service. In a real-time application, the computational time required to perform the calculation is paramount for operators to take immediate actions to prevent cascading outages. Therefore, the numerical performance of the contingency analysis is the main focus of this current research. In power flow calculation, when solving the network equations with a sparse matrix solver, most of the time is spent factorizing the Jacobian matrix. In terms of computation time, the symbolic factorization is the costliest operation in the LU (Lower-upper) factorization process. This paper proposes a novel method to perform the calculation with only one symbolic factorization using a full Newton–Raphson-based generic formulation and modular approach (GFMA). The symbolic factorization retained can be used during the iterations of any power flow contingency scenario. A computer study demonstrates that reusing the same symbolic factorization greatly reduces computation time and improves numerical performance. Power system security assessment under N-1 and N-2 contingency conditions is performed for the IEEE standard 54-bus and 108-bus to evaluate the numerical performance of the proposed method. A comparison with the conventional power flow method shows that the time required for the analysis is shortened considerably, with a minimum gain of 228%. The comparative analysis demonstrates that the proposed solution has better numerical performance for large-scale networks. Full article

Surface nanocrystallization (SNC) modification can be used to realize the high-efficiency derusting of rusted Cr-alloyed rebar and obtain nanostructured grains on the surface of the rebar. The corrosion resistance performance of SNC rebar in a simulated Cl^--containing concrete pore solution was evaluated on the basis of electrochemical experiments. Potentiodynamic polarization testing showed that the passivation current density of the SNC rebar was about 18% of that of the rusted rebar. The structural composition of the passivation film of the SNC rebar in a concrete environment was studied using a novel characterization method, namely XPS deep sputtering, which confirmed that it had higher concentrations of Cr/Fe oxide and hydroxide, and therefore exhibited an enhanced degree of oxidation. Moreover, scanning electron microscopy and transmission electron microscopy were employed to investigate the microstructural characteristics of the SNC rebar, which was characterized by nanostructured grains with grain sizes ranging from 250 nm to 300 nm and which contained massive high-energy crystal defects, thereby promoting the film-forming reaction of Cr/Fe elements. The results of XPS depth analysis and microstructure characterization demonstrated that the SNC rebar exhibited excellent passivation performance in the concrete environment. These findings offer a new perspective on enhancing the passivation performance and chloride resistance of alloyed rebar, and provide guidance on the implementation of SNC rebar in actual engineering applications. Full article

The growth of leaves is subject to strict time regulation. Several genes influencing leaf growth have been identified, but little is known about how genes regulate the orderly initiation and growth of leaves. Here, we demonstrate that TaKLU/TaCYP78A5 contributes to a time regulation mechanism in leaves from initiation to expansion. TaKLU encodes the cytochrome P450 CYP78A5, and its homolog AtKLU has been described whose deletion is detrimental to organ growth. Our results show that TaKLU overexpression increases leaf size and biomass by altering the time of leaf initiation and expansion. TaKLU-overexpressing plants have larger leaves with more cells. Further dynamic observations indicate that enlarged wheat leaves have experienced a longer expansion time. Different from AtKLU inactivation increases leaf number and initiation rates, TaKLU overexpression only smooths the fluctuations of leaf initiation rates by adjusting the initiation time of local leaves, without affecting the overall leaf number and initiation rates. In addition, complementary analyses suggest TaKLU is functionally conserved with AtKLU in controlling the leaf initiation and size and may involve auxin accumulation. Our results provide a new insight into the time regulation mechanisms of leaf growth in wheat. Full article

The integration of renewable energy sources into modern power systems requires simulations with smaller step sizes, larger network models and the incorporation of complex nonlinear component models. These features make it more difficult to meet computation time requirements in real-time simulations and have motivated the development of high-performance LU decomposition methods. Since nonlinear component models cause numerical variations in the system matrix between simulation steps, this paper places a particular focus on the recomputation of LU decomposition, i.e., on the refactorisation step. The main contribution is the adoption of a factorisation path algorithm for partial refactorisation, which takes into account that only a subset of matrix entries change their values. The approach is integrated into the modern LU decomposition method NICSLU and benchmarked against the methods SuperLU and KLU. A performance analysis was carried out considering benchmark as well as real power systems. The results show the significant speedup of refactorisation computation times in use cases involving system matrices of different sizes, a variety of sparsity patterns and different ratios of numerically varying matrix entries. Consequently, the presented high-performance LU decomposition method can assist in meeting computation time requirements in real-time simulations of modern power systems. Full article

The formation of a corrosion-resistant coating by the hydrothermal method is an effective way to provide significant protection to magnesium alloys. However, it is a challenge to prepare such a coating on magnesium-lithium alloys because of its high chemical activity. Herein, the dual-layer structured corrosion-resistant conversion coating composed with Mg(OH)₂ and LiOH was successfully synthesized on Mg-9Li alloy by the optimization of the hydrothermal reaction in deionized water. The coating synthesized at 140 °C for 2 h has the best anti-corrosion performance in all obtained coatings, which has a uniform and compact coating with thickness of about 3 μm. The improvement of the hydrophobicity due to the stacking structure of the surface layer, as well as the barrier effect of its inner compact coating on corrosive media, lead to the excellent anti-corrosion performance of the obtained hydrothermal conversion coating Full article

The incorporation of oleic acid and oleylamine, acting as organic surfactant coatings for a novel solvothermal synthesis procedure, resulted in the formation of monoclinic KLu(WO₄)₂ nanocrystals. The formation of this crystalline phase was confirmed structurally from X-ray powder diffraction patterns and Raman vibrational modes, and thermally by differential thermal analysis. The transmission electron microscopy images confirm the nanodimensional size (~12 nm and ~16 nm for microwave-assisted and conventional autoclave solvothermal synthesis) of the particles and no agglomeration, contrary to the traditional modified sol-gel Pechini methodology. Upon doping with holmium (III) and thulium (III) lanthanide ions, these nanocrystals can generate simultaneously photoluminescence and heat, acting as nanothermometers and as photothermal agents in the third biological window, i.e., self-assessed photothermal agents, upon excitation with 808 nm near infrared, lying in the first biological window. The emissions of these nanocrystals, regardless of the solvothermal synthetic methodology applied to synthesize them, are located at 1.45 μm, 1.8 μm and 1.96 μm, attributed to the ³H₄ → ³F₄ and ³F₄ → ³H₆ electronic transition of Tm³⁺ and ⁵I₇ → ⁵I₈ electronic transition of Ho³⁺, respectively. The self-assessing properties of these nanocrystals are studied as a function of their size and shape and compared to the ones prepared by the modified sol-gel Pechini methodology, revealing that the small nanocrystals obtained by the hydrothermal methods have the ability to generate heat more efficiently, but their capacity to sense temperature is not as good as that of the nanoparticles prepared by the modified sol-gel Pechnini method, revealing that the synthesis method influences the performance of these self-assessed photothermal agents. The self-assessing ability of these nanocrystals in the third biological window is proven via an ex-vivo experiment, achieving thermal knowledge and heat generation at a maximum penetration depth of 2 mm. Full article

The shoot meristem, a stem-cell-containing tissue initiated during plant embryogenesis, is responsible for continuous shoot organ production in postembryonic development. Although key regulatory factors including KNOX genes are responsible for stem cell maintenance in the shoot meristem, how the onset of such factors is regulated during embryogenesis is elusive. Here, we present evidence that the two KNOX genes STM and KNAT6 together with the two other regulatory genes BLR and LAS are functionally important downstream genes of CUC1 and CUC2, which are a redundant pair of genes that specify the embryonic shoot organ boundary. Combined expression of STM with any of KNAT6, BLR, and LAS can efficiently rescue the defects of shoot meristem formation and/or separation of cotyledons in cuc1cuc2 double mutants. In addition, CUC1 and CUC2 are also required for the activation of KLU, a cytochrome P450-encoding gene known to restrict organ production, and KLU counteracts STM in the promotion of meristem activity, providing a possible balancing mechanism for shoot meristem maintenance. Together, these results establish the roles for CUC1 and CUC2 in coordinating the activation of two classes of genes with opposite effects on shoot meristem activity. Full article

This work analyzes the effects of ultrafine aluminum (Al) grains on the anodizing coating reaction and anticorrosion performance of anodized industrial pure Al. Equal-channel angular pressing (ECAP) was applied to cast pure Al continuously for 16 passes at room temperature, and its average grain size was dramatically refined to about 1.5 μm. The ultrafine-grain (UFG) pure Al was further anodized with a cast sample via a parallel anodizing circuit at a constant total input current. Benefited by the higher volume fraction of grain boundaries and higher internal energy of the UFG substrate, the anodizing process of the ECAP-processed pure Al was significantly accelerated, showing a more intense initial anodizing reaction, a faster initial coating thickening, and much earlier porous-layer formation compared to the cast sample. As the anodizing reaction continued, the newly formed thicker coating of the ECAP-coated sample significantly hindered the diffusion process, weakening the thermodynamic advantage and decreasing the anodizing current of the ECAP-processed sample. During the entire anodizing duration, the ECAP-processed pure Al experienced gradually decreased anodizing current, while the cast sample experienced increased anodizing current. Because of the more total reaction, the ECAP-coated sample always maintained a relatively thicker coating and better anticorrosion performance during the entire anodizing duration. Full article

The ability to manage, distil and disseminate the significant amount of information that is available from published literature is fast becoming a core and critical skill across all research domains, including that of forensic science. In this study, a simplified scientometric approach has been applied to available literature on gunshot residue (GSR) as a test evidence type aiming to evaluate publication trends and explore the interconnectivity between authors. A total of 731 publications were retrieved using the search engine ‘Scopus’ and come from 1589 known authors, of whom 401 contributed to more than one research output on this subject. Out of the total number of publications, only 35 (4.8%) were found to be Open Access (OA). The Compound Annual Growth Rate (CAGR) for years 2006 and 2016 reveals a much higher growth in publications relating to GSR (8.0%) than the benchmark annual growth rate of 3.9%. The distribution of a broad spectrum of keywords generated from the publications confirms a historical trend, in particular regarding the use of analytical techniques, in the study of gunshot residue. The results inform how relevant information extracted from a bibliometric search can be used to explore, analyse and define new research areas. Full article