Search Results (8)

The large-scale conversion of forests to agriculture has caused biodiversity loss, climate change, and disrupted dietary fatty acid balances, with adverse public health effects. Wild edibles like pine nuts, especially Pinus cembroides, provide sustainable solutions by supporting ecosystems and offering economic value. However, variability in seed quality limits market potential, and lipidomic studies on P. cembroides remain sparse. This paper underscores the ecological, social, and nutritional value of P. cembroides while advocating for advanced research to enhance its use as a non-timber forest resource in Mexico’s communal areas. It explores various analytical techniques, such as nuclear magnetic resonances (NMR), chromatography coupled with mass spectrometry (HPLC-MS, GC-MS) and GC coupled with flame ionization detector (GC-FID), highlighting extraction methods like derivatization, purification, and thin-layer chromatography. Likewise, some considerations are addressed for the treatment of data obtained in the detection of fatty acids from bioformatics and the evaluation of the data through statistical methods and artificial intelligence and deep learning. These approaches aim to improve fatty acid profiling and seed quality assessments, fostering the species economic viability and supporting sustainable livelihoods in rural communities, encouraging researchers across the country to explore the fatty acid composition of different P. cembroides populations can drive valuable insights into its nutritional and ecological significance. Such efforts can enhance understanding of regional variations, promote sustainable use, and elevate the specie’s economic and scientific value. Full article

Mycotoxins in maize represent a great threat to human health. For this reason, novel technics such as ozone treatment are used to reduce the content of maize mycotoxins. However, there is little knowledge about the effect of ozone treatment on maize quality parameters. This study investigated the changes in Fusarium and Aspergillus mycotoxins and the changes in fatty acids during the ozone treatment of maize samples. Sixteen maize hybrids were visually tested for the naturally occurring ear rot severity and treated with three different concentrations of ozone (40, 70, and 85 mg/L). Mycotoxin content in maize samples was determined using a high-performance liquid chromatography (HPLC) system, whereas dominant fatty acids were determined using gas chromatography coupled with a flame ionization detector (GC-FID). Ozone treatments could be successfully applied to reduce the content of mycotoxins in maize below the detection limit. Ozone treatments increased the content of monounsaturated fatty acids (MUFAs) and decreased the content of polyunsaturated fatty acids (PUFAs), i.e., linoleic acid (36.7% in relation to the lowest applied ozone concentration), which negatively affected the nutritional value of maize. Full article

Aiming at the development of a greener ethylene removal alternative, the goal of this study was to scale up and ensure the safety of α-cyclodextrin nanosponges (α-CD-NS) for further use as ethylene scavengers. The solvent-free synthesis of α-CD-NS was successfully scaled up using α-cyclodextrin and N,N′-carbonyldiimidazole as cross-linkers (1:4 molar ratio) by means of mechanical alloying using a PM 100 ball mill by focusing on varying the rotation frequency, as determined by FTIR-ATR, X-ray diffraction, and TGA. α-CD-NS washing optimization was performed in water by monitoring the imidazole concentration in the washing solution through the validation of a fast and sensitive HPLC-DAD method. After 6 h at 40 °C, all imidazole was extracted, allowing a faster and less energy-dependent extraction. α-CD-NS absorbent capacity and porosity were also evaluated through BET isotherms and ethylene absorption experiments using α-CD-NS and commercially available absorbents (zeolite and bentonite) were performed by means of gas chromatography (GC) coupled to a flame ionization detector (FID). With a 93 µL h⁻¹ kg_adsorbent⁻¹ ethylene removal capacity, α-CD-NS revealed the best ethylene scavenging activity when compared to the other absorbents, opening the doors for a safer, innovative, and eco-friendlier ethylene removal active packaging. Full article

Rapeseed meal (RSM), a by-product of oilseed extraction connected to the agri-food and biofuel sectors, is currently used as animal feed and for other low-value purposes. With a biorefinery approach, RSM could be valorized as a source of bio-based molecules for high-value applications. This study provides a chemical characterization of RSM in the perspective of its valorization. A qualitative study of main functional groups by fourier transform infrared (FTIR) spectroscopy was integrated with a chemical characterization of macronutrients, minerals by inductively coupled plasma optical emission spectrometry (ICP-OES), phenolic acids and lipid components by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), HPLC-diode-array detector (HPLC-DAD) and gas chromatography-mass spectrometry/flame ionization detector (GC-MS/FID). The study, conducted on different lots of RSM collected over a one-year period from an oil pressing factory serving a biofuel biorefinery, highlighted a constant quality over time of RSM, characterized by high protein (31–34%), fiber (33–40%) and mineral (5.5–6.8%) contents. Polyphenol extracts showed a significant antioxidant activity and a prevalence of sinapic acid, accounting for more than 85% of total phenolic acids (395–437 mg kg⁻¹ RSM). Results highlight the potentialities of RSM for further valorization strategies that may lead to the creation of new cross-sector interconnections and bio-based value chains with improvement of the economics and sustainability of the bioeconomy sectors involved. Full article

In the last few years, the flavored beer market has increased significantly. In particular, consumers showed a growing interest in citrus-flavored beers. Citrus fruits contain, among other class of compounds, terpenes and terpenoids and oxygenated heterocyclic compounds. The absence of a specific legislation concerning beer flavored production and ingredients reported on the labels makes these beers subject to possible adulterations. Solid phase micro extraction (SPME) followed by gas chromatographic–mass spectrometry (GC-MS) and gas chromatographic-flame ionization detector (GC-FID) analysis of the volatile profile together with the characterization of the oxygen heterocyclic compounds through high performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS) demonstrated to be a powerful analytical strategy for quality control. In this study, we combined the volatile and non-volatile profiles of “citrus flavored mainstream beers”, in order to evaluate the authenticity and determine markers to prevent food frauds. The changes in the aroma composition of the unflavored types after the addition of peel, or citrus essential oil were also evaluated. The linear retention index (LRI) system was used for both techniques; in particular, its application in liquid chromatography is still limited and represents a novelty. The coupling of the high sensitivity of the HPLC MS/MS method with the LRI system, it has made possible for the first time a reliable identification and an accurate quantification of furocoumarins in citrus-flavored beers. Full article

The purpose of the study was to determine the differences between two subspecies: O. vulgare L. subsp. hirtum (Link) Ietswaart (Greek oregano) and O. vulgare L. subsp. vulgare (common oregano) growing in cultivation conditions within temperate climate of Central Europe. The characteristic of the subspecies was undertaken in terms of selected morphological parameters and the quality of the raw material. The herb of both subspecies was evaluated on the content and composition of essential oil by hydrodistillation followed by GC-MS and GC-FID (gas chromatography coupled with mass spectrometry and flame ionization detector), the total content of phenolic acids (according to PP 6th ed.) and the content of rosmarinic acid (by HPLC). The sensory evaluation (QDA) was performed, as well. Greek oregano was distinguished by visibly higher number of glandular trichomes on the leaves (up to 4.85 per 1 mm²) followed by higher content of essential oil in the herb (up to 3.36 g × 100 g⁻¹ DW) in comparison to common oregano. Based on the essential oil composition, Greek oregano was classified as mixed carvacrol/γ-terpinene chemotype, while common oregano as mixed sabinyl/cymyl type rich in sesquiterpenes. Greek oregano was also characterized by higher total content of phenolic acids (up to 6.16 g × 100 g⁻¹ DW) and rosmarinic acid (up to 6787.2 mg × 100 g⁻¹ DW) than common oregano. Essential oil content reached the maximum at the beginning of blooming (common oregano) and at the full blooming stage (Greek oregano). In turn, the amount of phenolic acids followed by rosmarinic acid was the highest at the beginning of seed-setting stage, in the case of both subspecies. The differences between subspecies concerning chemical composition (especially essential oil) were reflected in the sensory attributes, where both odor and taste notes were found at higher level for Greek oregano. Results of our work indicate that Greek oregano is well adapted to grow in the temperate zone conditions. Such adaptation was reflected mainly in the satisfied yield and maintaining characters typical for the Mediterranean plant, e.g., a high essential oil content followed by high carvacrol share, traits the most important from practice viewpoint. Full article

In the present study, the chemical composition of the microalga Euglena cantabrica was investigated. The extraction of bioactive compounds was done using pressurized liquid extraction (PLE) at different temperatures (40–180 °C) and using green solvents (ethanol-water mixtures). A statistical design of experiments was used to optimize the maximum antioxidant capacity of the extracts by response surface methodology. The antioxidant capacity was determined through the inhibition of 2,2’-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, while the chemical analyses of the extracts were carried out using different chromatographic techniques. Chlorophylls and carotenoids were analyzed by high-performance liquid chromatography coupled to a diode array detector and mass spectrometry (HPLC-DAD-MS/MS) and carbohydrates by gas chromatography with flame ionization detection (GC-FID) and high-pressure size-exclusion chromatography coupled to an evaporative light-scattering detector (HPSEC-ELSD). The results showed different possibilities for the extraction conditions, depending on the desired bioactivity or chemical composition. Briefly, (i) mixtures of ethanol-water containing around 40% ethanol at 180 °C gave the best antioxidant capacity, (ii) mixtures containing around 50% ethanol at 110 °C gave the best yield of β-glucan paramylon, and (iii) the use of pure ethanol at a low temperature (40 °C) is the best choice for the recovery of carotenoids such as diatoxanthin. Summing up, E. cantabrica seems to be a good candidate to be used in biorefinery to obtain different bioactive compounds. Full article

Paper-based food packaging materials are widely used, renewable, and biodegradable. Because of its porous structure, paper has poor or no barrier performance against grease, water vapor, water, and volatile organic compounds. Moreover, recycled paperboard can be a source of organic residuals that are able to migrate into packed food. Two different types of paperboard produced from primary and secondary cellulosic fibers were coated using renewable materials, such as alginate and chitosan, and comprehensive barrier measurements showed multifunctional barrier properties of these two biomaterials. Both paper substrates were successfully coated using a draw-down coater, and the measured air permeability of the coated samples was 0 mL·min⁻¹. Grease resistance was improved, while it was possible to reduce water vapor transmission, the migration of mineral oil saturated hydrocarbons and mineral oil aromatic hydrocarbons (MOSH/MOAH), and the permeation of volatile compounds for both paper substrates when compared with uncoated substrates. Wettability and water absorptiveness of chitosan- and alginate-coated papers were found to be substrate-dependent properties, and could be significantly affected by bio-based coatings. In summary, industrially produced paperboard was upgraded by coating it with the naturally biodegradable biopolymers, alginate and chitosan, thus achieving extraordinary barrier performance for various applications within the packaging industry. Full article