Search Results (11)

Utilizing green nanomaterials in a biomimetic setting to treat wastewater emulates the sustainability and efficiency of natural systems. In this study, wood apple (WA) outer shell extract was used as a reducing and stabilizing agent in a simple, inexpensive, and environmentally friendly green approach to synthesize Ag nanoparticles (NPs), ZnO NPs, and Ag@ZnO nanocomposites (NCs) as potential photocatalysts for the degradation of an industrial dye known as Brilliant Blue (BB). Synthesis parameters of Ag NPs, ZnO NPs, and Ag@ZnO NCs were evaluated in this research utilizing various analytical methods. Surface plasmon resonance peaks for Ag NPs, ZnO NPs, and Ag@ZnO NCs were observed at 400–470 nm, 320–370 nm, and 400–500 nm, respectively. The appearance of a Fourier transform infrared band in the 500–700 cm⁻¹ region is attributed to the Zn-O bond stretching mode, indicating the formation of ZnO NPs and Ag@ZnO NCs. The SEM images of WA-mediated Ag NPs, ZnO NPs, and Ag@ZnO NCs illustrate spherical, flake, and flower-shapes, respectively, while the average sizes of these three types of particles are determined to be 15.04 ± 5.40 nm, 82.40 ± 3.24 nm, and 12.08 ± 2.91 nm, respectively, as per transmission electron microscopic investigation. Moreover, X-ray diffraction patterns confirm the synthesis of pure crystalline structures, with a face-centered cubic structure for Ag and a hexagonal wurtzite structure for ZnO NPs during the synthesis of Ag@ZnO NCs. The biogenic WA-mediated ZnO NPs show a remarkable photodegradation efficiency of 65.8% under the optimum conditions of catalytic load, pH, and dye concentration, whereas WA-mediated Ag NPs and Ag@ZnO NC show 13.9% and 63.7% photodegradation efficiency, respectively, at 240 min. The study reveals that WA-mediated ZnO NPs and Ag@ZnO NCs exhibit nearly identical photo-catalytic activity against the BB dye, presenting new opportunities for sustainable use in textile and wastewater treatment. Full article

Zinc oxide nanoparticles (ZnO NPs) have been investigated due to their distinct properties, variety of structures and sizes, and mainly for their antimicrobial activity. They have received a positive safety evaluation from the European Food Safety Authority (EFSA) for packaging applications as transparent ultraviolet (UV) light absorbers based on the absence of significant migration of zinc oxide in particulate form. ZnO NPs with different morphologies (spherical, flower, and sheet) have been synthesized via different sol–gel methods and extensively characterized by several solid-state techniques, namely vibrational spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), Fourier Transform Infrared Spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV-VIS), electron paramagnetic resonance (EPR), and nitrogen adsorption–desorption isotherms. The ZnO NPs were assessed for their antibacterial activity against Escherichia coli (gram-negative bacteria) and Staphylococcus aureus (gram-positive bacteria) to study the influence of morphology and size on efficacy. ZnO NPs with different morphologies and sizes demonstrated antimicrobial activity against both bacteria. The highest microbial cell reduction rate (7–8 log CFU mL⁻¹ for E. coli and 6–7 log CFU mL⁻¹ for S. aureus) was obtained for the sheet- and spherical-shaped NPs as a result of the high specific surface area. In fact, the higher surface areas of the sheet- and spherical-shaped nanoparticles (18.5 and 13.4 m² g⁻¹, respectively), compared to the flower-shaped NPs (5.3 m²g⁻¹), seem to promote more efficient bacterial cell reduction. The spherical-shaped particles were also smaller (31 nm) compared with the flower-shaped (233 × 249 nm) ones. The flower ZnO NP resulted in a 4–5 log CFU mL⁻¹ reduction for E. coli and 3–4 log CFU mL⁻¹ reduction for S. aureus. The lower apparent antibacterial activity of the flower-shaped could be associated with either the lack of defects on the particle core or the shape shielding effect. Compared to S. aureus, E. coli seems to be less resistant to ZnO NPs, which may be explained by the characteristics of its cell membrane. With simple synthesis techniques, which do not allow the size and shape of the nanoparticles to be controlled simultaneously, it is a challenge to elucidate the effect of each of these two parameters on antibacterial performance. Full article

ZnO/graphene nanocomposites were prepared using a facile approach. Graphene nanosheets were prepared by ultrasonication-based liquid phase exfoliation of graphite powder in a low boiling point organic solvent, 1,2-Dichloroethane, for the preparation of ZnO/graphene nanocomposites. Structural properties of the synthesized ZnO/graphene nanocomposites were studied through powder XRD and micro-Raman analysis. The characteristic Raman active modes of ZnO and graphene present in the micro-Raman spectra ensured the formation of ZnO/graphene nanocomposite and it is inferred that the graphene sheets in the composites were few layers in nature. Increasing the concentration of graphene influenced the surface morphology of the ZnO nanoparticles and a flower shape ZnO was formed on the graphene nanosheets of the composite with high graphene concentration. The efficiencies of the samples for the photocatalytic degradation of Methylene Blue dye under sunlight irradiation were investigated and 97% degradation efficiency was observed. The stability of the nanocomposites was evaluated by performing five cycles, and 92% degradation efficiency was maintained. The observed results were compared with that of ZnO/graphene composite derived from other methods. Full article

In this paper, an electrochemical biosensor was established for the high-sensitivity detection of Tenuazonic acid (TeA) in fruits based on the enrichment of flower-shaped nano-ZnO and the specific recognition of immune response. Herein flower-shaped nano-ZnO (ZnO NFs) with a hexagonal wurtzite structure and diameter of 700–800 nm were demonstrated to have the optimal specific surface area and outstanding conductivity, compared with different morphology, sizes, and crystal structures of nano-ZnO. Second, the ZnO NFs were used as carriers for efficiently immobilizing monoclonal antibodies to obtain antibody bioconjugates, which were anchored on the 2-mercaptobenzoic acid-modified gold electrode by amide reaction. In the presence of TeA, the monoclonal antibody could specifically recognize and bind to it, resulting in a decrease in electron transfer ability on the gold electrode surface. Finally, the electrochemical biosensor showed a range from 5 × 10⁻⁵ μg/mL to 5 × 10⁻¹ μg/mL with a detection limit of 1.14 × 10⁻⁵ μg/mL. Furthermore, it exhibited high selectivity for TeA among other analogs, such as Altenuene (ALT) and Alternariol (AOH). Notably, the proposed strategy could be employed to monitor TeA in tomato and citrus, showing potential application prospects in practical application and commercial value. Full article

In the present work, the properties of ZnO nanoparticles obtained using an eco-friendly synthesis (biomediated methods in microwave irradiation) were studied. Saponaria officinalis extracts were used as both reducing and capping agents in the green nanochemistry synthesis of ZnO. Inorganic zinc oxide nanopowders were successfully prepared by a modified hydrothermal method and plant extract-mediated method. The influence of microwave irradiation was studied in both cases. The size, composition, crystallinity and morphology of inorganic nanoparticles (NPs) were investigated using dynamic light scattering (DLS), powder X-ray diffraction (XRD), SEM-EDX microscopy. Tunings of the nanochemistry reaction conditions (Zn precursor, structuring agent), ZnO NPs with various shapes were obtained, from quasi-spherical to flower-like. The optical properties and photocatalytic activity (degradation of methylene blue as model compound) were also investigated. ZnO nanopowders’ antibacterial activity was tested against Gram-positive and Gram-negative bacterial strains to evidence the influence of the vegetal extract-mediated synthesis on the biological activity. Full article

This study assessed the antimicrobial efficacy of synthesized zinc oxide nanoparticles produced using aqueous extracts of pomegranate leaves and flowers designated ZnO-NPs-PL, ZnO-NPs-PF. In the study, oxides of zinc were successfully employed to fabricate nanoparticles using extracts from leaves and flowers of pomegranate (Punica granatum). The nanoparticles obtained were characterized spectroscopically. X-ray diffractive analysis (XRD) revealed the elemental components and nature of the synthesized particles. The fabricated zinc oxide nanoparticle (ZnO-NPs) showed a crystalline structure. The morphology of the nanoparticles as shown by scanning electron microscopy (SEM) was unevenly spherical and the functional groups involved in stabilization, reduction and capping were confirmed using Fourier Transform Infra-Red (FT-IR) Spectroscopy. Confirmation of the nanoparticles by UV–Vis analysis showed absorption bands of 284 and 357 nm for pomegranate leaf and flower extract, respectively, mediated ZnO-NPs. Evaluation of the antimicrobial efficacy of the fabricated nanoparticles showed that ZnO-NPs were effective against all selected pathogenic strains, Staphylococcus aureus, Bacillus cereus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Streptococcus pneumoniae, Salmonella diarizonae, Salmonella typhi, Enterococcus faecalis, Enterococcus faecium, Escherichia coli, Moraxella catarrhalis, Aeromonas hydrophila and Listeria monocytogenes, used in the analysis. The effectiveness of these nanoparticles could be linked to their sizes and shapes as obtained using a transmission electron microscope (TEM) and scanning electron microscope (SEM). Our reports revealed that increasing the concentration of the nanoparticles resulted in an increase in the antibacterial activity exerted by the nanoparticles, thus suggesting that both ZnO-NPs can effectively be used as alternative antibacterial agents. Further research is required to assess their mechanisms of action and toxicity. Full article

In the current era of globalization, synthetic dyes are one of the key factors of water pollution. Photocatalysis constitutes a promising technology for the treatment of wastewater, especially to those containing hard-to-remove organic compounds. Zinc oxide nanoparticles (ZnONPs) play a vital role as a photocatalyst material. This research highlights the synthesized ZnONPs with roselle flower and oil palm leaf extract. The extracts and sodium hydroxide (NaOH) act as reducing agents during the synthesis process. Synthesis without the addition of plant extract is used as blank control for the experiment. Structural and optical studies of the three variants of ZnONPs were performed. High purity of ZnONPs with element Zn and O was obtained. The size of the three variants of ZnONPs was from 10–15 nm and found in agglomerated spherical shape. Large band gap, 3.2 eV was obtained by UV-Vis and high thermal stability was proven by TGA. Oxygen vacancies that assist in the degradation phenomenon were found in ZnONPs. Five percent of ZnONPs with the presence of 10 W UV light could effectively degrade 10 ppm MO in 5 h and MB in 3 h. Besides, high antioxidant properties and low toxicity demonstrated the ability of ZnONPs to be used as photocatalysts. In conclusion, ZnONPs can be further developed for pharmaceutical and industrial use. Full article

The proposed work reports that ZnO nanoflowers were grown on fluorine-doped tin oxide (FTO) substrates via a solution process at low temperature. The high purity and well-crystalline behavior of ZnO nanoflowers were established by X-ray diffraction. The morphological characteristics of ZnO nanoflowers were clearly revealed that the grown flower structures were in high density with 3D floral structure comprising of small rods assembled as petals. Using UV absorption and Raman spectroscopy, the optical and structural properties of the ZnO nanoflowers were studied. The photoelectrochemical properties of the ZnO nanoflowers were studied by utilizing as a photoanode for the manufacture of dye-sensitized solar cells (DSSCs). The fabricated DSSC with ZnO nanoflowers photoanode attained reasonable overall conversion efficiency of ~1.40% and a short-circuit current density (J_SC) of ~4.22 mA cm⁻² with an open circuit voltage (V_OC) of 0.615 V and a fill factor (FF) of ~0.54. ZnO nanostructures have given rise to possible utilization as an inexpensive and efficient photoanode materials for DSSCs. Full article

In this study, we demonstrate a rapid treatment method for producing a needle-like nanowire structure on a hot-dip galvanized sheet at a temperature of 50 °C. The processing method involved only supercritical carbon dioxide and water to induce a reaction on the zinc surface, which resulted in growth of zinc hydroxycarbonate nanowires into flower-like shapes. This artificial patina nanostructure predicts high surface area and offers interesting opportunities for its use in industrial high-end applications. The nanowires can significantly improve paint adhesion and promote electrochemical stability for organic coatings, or be converted to ZnO nanostructures by calcining to be used in various semiconductor applications. Full article

In the present paper, we report on a simple and new approach for the synthesis of hierarchical flower-like zinc oxide superstructures ZnO (FL) in the presence of the TEMPO-oxidized cellulose gel (TOCgel) through a room temperature sol-gel process in aqueous medium. Resulting composite films based on TOCgel and ZnO were investigated by several techniques including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and mechanical tests. SEM images demonstrated the formation of well-shaped flower-like ZnO superstructures within the fibrous structure of the TOCgel with a uniform diameter (~5 μm). FTIR and XPS results clearly confirmed the formation of such ZnO structures. We suggested that the carboxylate groups of TOCgel fibers act as capping agents and promote the construction of such flower-like ZnO via a nucleation-growth process. A proposed mechanism based on the oriented attachment-driven growth was discussed in order to explain the formation of ZnO (FL). The photocatalytic activity of the TOCgel/ZnO composite in the degradation of methylene blue (MB) under UV irradiation was clearly confirmed. Finally, mechanical tests demonstrated that the former TOCgel/ZnO film maintained a good flexibility (bent up to ~120°) without losing its photocatalytic activity. Full article

ZnO nanostructures were synthesized by hydrothermal method using different molar ratios of cetyltrimethylammonium bromide (CTAB) and Sodium dodecyl sulfate (SDS) as structure directing agents. The effect of surfactants on the morphology of the ZnO crystals was investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) techniques. The results indicate that the mixture of cationic-anionic surfactants can significantly modify the shape and size of ZnO particles. Various structures such as flakes, sheets, rods, spheres, flowers and triangular-like particles sized from micro to nano were obtained. In order to examine the possible changes in other properties of ZnO, characterizations like powder X-ray diffraction (PXRD), thermogravimetric and differential thermogravimetric analysis (TGA-DTG), FTIR, surface area and porosity and UV-visible spectroscopy analysis were also studied and discussed. Full article