Search Results (55)

Clouds cover nearly two-thirds of Earth’s surface, making reliable cloud mask data essential for remote sensing applications and atmospheric research. This study develops a TrAdaBoost transfer learning framework that integrates active CALIOP and passive MODIS observations to enable unified, high-accuracy cloud detection across FY-4A/AGRI, FY-4B/AGRI, and Himawari-8/9 AHI sensors. The proposed TrAdaBoost Cloud Mask algorithm (TCM) achieves robust performance in dual validations with CALIPSO VFM and MOD35/MYD35, attaining a hit rate (HR) above 0.85 and a cloudy probability of detection (${POD}_{cld})$ exceeding 0.89. Relative to official products, TCM consistently delivers higher accuracy, with the most pronounced gains on FY-4A/AGRI. SHAP interpretability analysis highlights that 0.47 μm albedo, 10.8/10.4 μm and 12.0/12.4 μm brightness temperatures and geometric factors such as solar zenith angles (SZA) and satellite zenith angles (VZA) are key contributors influencing cloud detection. Multidimensional consistency assessments further indicate strong inter-sensor agreement under diverse SZA and land cover conditions, underscoring the stability and generalizability of TCM. These results provide a robust foundation for the advancement of multi-source satellite cloud mask algorithms and the development of cloud data products integrated. Full article

Cloud detection is an indispensable step in satellite remote sensing of cloud properties and objects under the influence of cloud occlusion. Nevertheless, interfering targets such as snow and haze pollution are easily misjudged as clouds for most of the current algorithms. Hence, a robust cloud detection algorithm is urgently needed, especially for regions with high latitudes or severe air pollution. This paper demonstrated that the passive satellite detector Advanced Geosynchronous Radiation Imager (AGRI) onboard the FY-4A satellite has a great possibility to misjudge the dense aerosols in haze pollution as clouds during the daytime, and constructed an algorithm based on the spectral information of the AGRI’s 14 bands with a concise and high-speed calculation. This study adjusted the previously proposed cloud mask rectification algorithm of Moderate-Resolution Imaging Spectroradiometer (MODIS), rectified the MODIS cloud detection result, and used it as the accurate cloud mask data. The algorithm was constructed based on adjusted Fisher discrimination analysis (AFDA) and spectral spatial variability (SSV) methods over four different underlying surfaces (land, desert, snow, and water) and two seasons (summer and winter). This algorithm divides the identification into two steps to screen the confident cloud clusters and broken clouds, which are not easy to recognize, respectively. In the first step, channels with obvious differences in cloudy and cloud-free areas were selected, and AFDA was utilized to build a weighted sum formula across the normalized spectral data of the selected bands. This step transforms the traditional dynamic-threshold test on multiple bands into a simple test of the calculated summation value. In the second step, SSV was used to capture the broken clouds by calculating the standard deviation (STD) of spectra in every 3 × 3-pixel window to quantify the spectral homogeneity within a small scale. To assess the algorithm’s spatial and temporal generalizability, two evaluations were conducted: one examining four key regions and another assessing three different moments on a certain day in East China. The results showed that the algorithm has an excellent accuracy across four different underlying surfaces, insusceptible to the main interferences such as haze and snow, and shows a strong detection capability for broken clouds. This algorithm enables widespread application to different regions and times of day, with a low calculation complexity, indicating that a new method satisfying the requirements of fast and robust cloud detection can be achieved. Full article

Clouds are closely related to precipitation, as their type, microphysical characteristics, and dynamic properties determine the intensity, duration, and form of rainfall. While geostationary satellites offer continuous cloud-top observations, they cannot capture the full three-dimensional structure of clouds, limiting the accuracy of precipitation forecasting based on geostationary satellite data. However, cloud–precipitation relationships contain valuable physical information that can be leveraged to improve forecasting performance. To further enhance the precision of satellite precipitation forecasting, this study proposes a multi-channel satellite precipitation forecasting method that integrates cloud classification products. The method combines precipitation-prior information from Himawari-8 satellite cloud classification products with multi-channel satellite observations to generate precipitation forecasts for the next four hours. This approach further exploits the potential of satellite observations in precipitation forecasting. Experimental results show that integrating cloud classification products improves the Critical Success Index by 8.0%, improves the Correlation Coefficient by 5.8%, and reduces the Mean Squared Error by 3.0%, but increases the MAE by 4.5%. It is proven that this method can effectively improve the accuracy of multi-channel satellite precipitation forecasting. Full article

The near-surface air temperature lapse rate (SATLR) is a crucial parameter in climate, hydrology, and ecology research conducted in mountainous regions. However, existing research has difficulty characterizing its dynamic changes on an hourly scale. Obtaining data with high spatiotemporal resolution in complex terrains using existing methods poses challenges. This study introduces a hierarchical method for estimating SATLR at high spatiotemporal resolutions based on Fengyun-4A (FY-4A) Advanced Geostationary Radiation Imager (AGRI) land surface temperature (LST) data and machine learning techniques. Based on reconstructed FY-4A AGRI LST data, this study downscales the 4 km resolution data to a 1 km resolution using machine learning. It then estimates the spatial distribution of near-surface air temperature (SAT) and normalized near-surface air temperature (nSAT) by integrating station observations. Subsequently, high spatiotemporal resolution SATLRs are estimated, and their spatial and temporal distribution characteristics in the Beijing–Tianjin–Hebei mountainous region are analyzed. The results indicate that the SATLR exhibits a predominant distribution of 2~6 °C/km annually across the study area. However, in specific regions such as Taihang Mountains in the southwest, Damajun Mountain in the northwest, and certain areas of central Beijing City, the SATLR exceeds 6 °C/km in depth. Conversely, in Chengde City in the northeast and Huapiling in Damajun Mountain in the northwest, the SATLR is shallower than 2 °C/km. Seasonally, the average SATLR displays significant variation, with 3~5 °C/km being prevalent in spring, summer, and autumn, and 2~4 °C/km in winter. Moreover, the diurnal SATLR patterns from the second to fifth altitude grades exhibit consistency throughout the year and across seasons, albeit with varying overall values at different altitudes. Notably, the SATLR of the first altitude grade demonstrates stability within a day at lower elevations. Full article

The Qinghai–Tibet Plateau (QTP), one of China’s most snow-rich regions, has an extremely fragile ecosystem, with drought being the primary driver of ecological degradation. Given that the water resources in this region predominantly exist in the form of snow, high-spatiotemporal-resolution snow mapping is essential for understanding snow distribution and managing snow water resources effectively. However, although FY-4A/AGRI is capable of obtaining wide-area remote sensing data, only the first to third bands have a resolution of 1 km, which greatly limits its ability to produce high-resolution snow maps. This study proposes U-SwinFusionNet (USFNet), a deep learning-based snow cover retrieval algorithm that leverages the multi-scale advantages of FY-4A/AGRI remote sensing data in the shortwave infrared and visible bands. By integrating 1 km and 2 km resolution remote sensing imagery with auxiliary terrain information, USFNet effectively enhances snow cover mapping accuracy. The proposed model innovatively combines Swin Transformer and convolutional neural networks (CNNs) to capture both global contextual information and local spatial details. Additionally, an Attention Feature Fusion Module (AFFM) is introduced to align and integrate features from different modalities through an efficient attention mechanism, while the Feature Complementation Module (FCM) facilitates interactions between the encoded and decoded features. As a result, USFNet produces snow cover maps with a spatial resolution of 1 km. Experimental comparisons with Artificial Neural Networks (ANNs), Random Forest (RF), U-Net, and ResNet-FSC demonstrate that USFNet exhibits superior robustness, enhanced snow cover continuity, and lower error rates. The model achieves a correlation coefficient of 0.9126 and an R² of 0.7072. Compared to the MOD10A1 snow product, USFNet demonstrates an improved sensitivity to fragmented and low-snow-cover areas while ensuring more natural snow boundary transitions. Full article

Cloud optical thickness (COT) stands as a critical parameter governing the radiative properties of clouds. This study develops a convolutional neural network (CNN) model to retrieve the COT of single-layer non-precipitating clouds during nighttime using FY-4B satellite data. The model integrates multi-channel brightness, temperature, and geographic and temporal features, without relying on auxiliary meteorological data, using the multi-point averaged 532 nm COT from CALIPSO as ground truth for training. Performance evaluation demonstrates robust retrieval accuracy, achieving coefficients of determination (R²) of 0.88 and 0.73 for satellite zenith angles (SAZAs) < 70° and >70°, respectively. Key advancements include the incorporation of temporal features, the Squeeze-and-Excitation (SE) module, and a multi-point averaging technique, each validated through ablation experiments to reduce bias and enhance stability. Meanwhile, a model error analysis experiment was conducted that further clarified the performance boundaries of the model. These findings underscore the model’s capability to retrieve the COT of single-layer non-precipitating clouds during nighttime with high precision. Full article

The ever-increasing capacity of numerical weather prediction (NWP) models requires accurate flow information at higher spatial and temporal resolutions. The atmospheric motion vectors (AMVs) extracted from the Advanced Geostationary Radiation Imager (AGRI) mounted on the Fengyun-4A (FY-4A) satellite can provide information about atmospheric flow fields on small scales. This study focused on the assimilation of FY-4A AMVs and its impact on forecasts in the regional NWP system of the China Meteorological Administration—Beijing (CAM-BJ). The statistical characterization of FY-4A AMVs was firstly analyzed, and an optimal observation error in each vertical level was obtained. Three groups of retrospective runs over a one-month period were conducted, and the impact of assimilating the AMVs with different strategies on the forecasts of the CMA-BJ system were compared and evaluated. The results suggested that the optimal observation errors reduced the standard deviation of the background departures for U and V wind, leading to an improvement in the standard deviation in the corresponding analysis departures of about 8.3% for U wind and 7.3% for V wind. Assimilating FY-4A AMV data with a quality indicator (QI) above 80 and the optimal observation errors reduced the error of upper wind forecast in the CMA-BJ system. A benefit was also obtained in the error of surface wind forecast after 6 h of the forecasts, although it was not significant. For rainfall forecast with different thresholds, the score skills increased slightly after 6 h of the forecasts. There was an overall improvement for the overprediction of 24 h accumulated precipitation forecast including the AMVs, even when conventional observations were relatively rich. The application of FY-4A AMVs with a QI > 80 and adjustment to observation errors has a positive impact on the upper wind forecast in the CMA-BJ system, improving the score skill of rainfall forecasting. Full article

Satellite data play an irreplaceable role in global observation data systems. Effective comprehensive application of satellite products will inevitably improve numerical weather prediction. FengYun-4 (FY-4) series satellites can provide not only radiance data but also retrieval data with high temporal and spatial resolutions. To evaluate the potential benefits of the combination application of FY-4 Advanced Geostationary Radiance Imager (AGRI) products on Typhoon Saola analysis and forecast, two group of experiments are set up with the Weather Research and Forecasting model (WRF). Compared with the benchmark experiment, whose sea surface temperature (SST) is from the National Centers for Environmental Prediction (NCEP) reanalysis data, the SST replacement experiments with FY-4 A/B SST products significantly improve the track and precipitation forecast, especially with the FY-4B SST product. Based on the above results, AGRI clear-sky and all-sky assimilations with FY-4B SST are implemented with a self-constructed AGRI assimilation module. The results show that the AGRI all-sky assimilation experiment can obtain better analyses and forecasts. Furthermore, it is proven that the combination application of AGRI radiance and SST products is beneficial for typhoon prediction. Full article

Extreme weather events like typhoons have become more frequent due to global climate change. Current typhoon monitoring methods include manual monitoring, mathematical morphological methods, and artificial intelligence. Manual monitoring is accurate but labor-intensive, while AI offers convenience but requires accuracy improvements. Mathematical morphology methods, such as brightness temperature perturbation (BTP) and a spatio-temporally consistent (STC) Scale-Invariant Feature Transform (SIFT), remain mainstream for typhoon positioning. This paper enhances BTP and STC SIFT methods for application to Fengyun 4A (FY-4A) Advanced Geosynchronous Radiation Imager (AGRI) L1 data, incorporating parallax correction for more accurate surface longitude and latitude positioning. The applicability of these methods for different typhoon intensities and monitoring time resolutions is analyzed. Automated monitoring with one-hour observation intervals in the northwest Pacific region demonstrates high positioning accuracy, reaching 25 km or better when compared to best path data from the China Meteorological Administration (CMA). For 1 h remote sensing observations, BTP is more accurate for typhoons at or above typhoon intensity, while STC SIFT is more accurate for weaker typhoons. In the current era of a high temporal resolution of typhoon monitoring using geostationary satellites, the method presented in this paper can serve the national meteorological industry for typhoon monitoring, which is beneficial to national pre-disaster prevention work as well as global meteorological research. Full article

Global dust events have become more frequent due to climate change and increased human activity, significantly impacting air quality and human health. Previous studies have mainly focused on determining atmospheric dust pollution levels through atmospheric parameter simulations or AOD values obtained from satellite remote sensing. However, research on the quantitative description of dust intensity and its cross-regional transport characteristics still faces numerous challenges. Therefore, this study utilized Fengyun-4A (FY-4A) satellite Advanced Geostationary Radiation Imager (AGRI) imagery, Cloud-Aerosol Lidar, and Infrared Pathfinder Satellite Observation (CALIPSO) lidar, and other auxiliary data, to conduct three-dimensional spatiotemporal monitoring and a cross-regional transport analysis of two typical dust events in the Beijing–Tianjin–Hebei (BTH) region of China using four dust intensity indices Infrared Channel Shortwave Dust (Icsd), Dust Detection Index (DDI), dust value (DV), and Dust Strength Index (DSI)) and the HYSPLIT model. We found that among the four indices, DDI was the most suitable for studying dust in the BTH region, with a detection accuracy (POCD) of >88% at all times and reaching a maximum of 96.14%. Both the 2021 and 2023 dust events originated from large-scale deforestation in southern Mongolia and the border area of Inner Mongolia, with dust plumes distributed between 2 and 12 km being transported across regions to the BTH area. Further, when dust aerosols are primarily concentrated below 4 km and PM10 concentrations consistently exceed 600 µg/m³, large dust storms are more likely to occur in the BTH region. The findings of this study provide valuable insights into the sources, transport pathways, and environmental impacts of dust aerosols. Full article

Near-surface air temperature (T_a) estimation by geostationary meteorological satellites is mainly carried out under clear-sky conditions. In this study, we propose an all-weather T_a estimation method utilizing FY-4A Advanced Geostationary Radiation Imager (AGRI) and the Global Forecast System (GFS), along with additional auxiliary data. The method includes two neural-network-based T_a estimation models for clear and cloudy skies, respectively. For clear skies, AGRI LST was utilized to estimate the T_a (T_a,clear), whereas cloud top temperature and cloud top height were employed to estimate the T_a for cloudy skies (T_a,cloudy). The estimated T_a was validated using the 2020 data from 1211 stations in China, and the RMSE values of the T_a,clear and T_a,cloudy were 1.80 °C and 1.72 °C, while the correlation coefficients were 0.99 and 0.986, respectively. The performance of the all-weather T_a estimation model showed clear temporal and spatial variation characteristics, with higher accuracy in summer (RMSE = 1.53 °C) and lower accuracy in winter (RMSE = 1.88 °C). The accuracy in southeastern China was substantially better than in western and northern China. In addition, the dependence of the accuracy of the T_a estimation model for LST, CTT, CTH, elevation, and air temperature were analyzed. The global sensitivity analysis shows that AGRI and GFS data are the most important factors for accurate T_a estimation. The AGRI-estimated T_a showed higher accuracy compared to the ERA5-Land data. The proposed models demonstrated potential for T_a estimation under all-weather conditions and are adaptable to other geostationary satellites. Full article

The Advanced Geostationary Radiation Imager (AGRI) sensor on board the geostationary satellite Fengyun-4B (FY-4B) is capable of capturing particles in different phases in the atmospheric environment and acquiring aerosol observation data with high spatial and temporal resolution. To understand the quality of the Land Aerosol (LDA) product of AGRI and its application prospects, we conducted a comprehensive evaluation of the AGRI LDA AOD. Using the 550 nm AGRI LDA AOD (550 nm) of nearly 1 year (1 October 2022 to 30 September 2023) to compare with the Aerosol Robotic Network (AERONET), MODIS MAIAC, and Himawari-9/AHI AODs. Results show the erratic algorithmic performance of AGRI LDA AOD, the correlation coefficient (R), mean error (Bias), root mean square error (RMSE), and the percentage of data with errors falling within the expected error envelope of $\pm (0.05+0.15\times {\mathrm{AOD}}_{AERONET})$ (within EE15) of the LDA AOD dataset are 0.55, 0.328, 0.533, and 34%, respectively. The LDA AOD appears to be overestimated easily in the southern and western regions of China and performs poorly in the offshore areas, with an R of 0.43, a Bias of 0.334, a larger RMSE of 0.597, and a global climate observing system fraction (GCOSF) percentage of 15% compared to the inland areas (R = 0.60, Bias = 0.163, RMSE = 0.509, GCOSF = 17%). Future improvements should focus on surface reflectance calculation, water vapor attenuation, and more suitable aerosol model selection to improve the algorithm’s accuracy. Full article

The Fengyun-4B (FY-4B) satellite is currently the primary operational geostationary meteorological satellite in China, replacing the previous FY-4A satellite. The advanced geostationary radiation imager (AGRI) aboard the FY-4B satellite provides an operational sea surface temperature (SST) product with a high observation frequency of 15 min. This paper conducts the first data quality assessment of operational SST products from the FY-4B/AGRI using quality-controlled measured SSTs from the in situ SST quality monitor dataset and foundation SSTs produced by the operational sea surface temperature and sea ice analysis (OSTIA) system from July 2023 to January 2024. The FY-4B/AGRI SST product provides a data quality level flag on a pixel-by-pixel basis. Accuracy evaluations are conducted on the FY-4B/AGRI SST product with different data quality levels. The results indicate that the FY-4B/AGRI operational SST generally has a negative mean bias compared to in situ SST and OSTIA SST, and that the accuracy of the FY-4B/AGRI SST, with an excellent quality level, can meet the needs of practical applications. The FY-4B/AGRI SST with an excellent quality level demonstrates a strong correlation with in situ SST and OSTIA SST, with a correlation coefficient R exceeding 0.99. Compared with in situ SST, the bias, root mean square error (RMSE), and unbiased RMSE (ubRMSE) of the FY-4B/AGRI SST with an excellent quality level are −0.19, 0.66, and 0.63 °C in daytime, and −0.15, 0.70, and 0.68 °C at night, respectively. Compared with OSTIA SST, the bias, RMSE, and ubRMSE of the FY-4B/AGRI SST with an excellent data quality level are −0.10, 0.64, and 0.63 °C in daytime, and −0.13, 0.68, and 0.67 °C at night. The FY-4B/AGRI SST tends to underestimate the sea water temperature in mid–low-latitude regions, while it tends to overestimate sea water temperature in high-latitude regions and near the edges of the full disk. The time-varying validation of FY-4B/AGRI SST accuracy shows weak fluctuations with a period of 3–4 months. Hourly accuracy verification shows that the difference between the FY-4B/AGRI SST and OSTIA SST reflects a diurnal effect. However, FY-4B/AGRI SST products need to be used with caution around midnight to avoid an abnormal accuracy. This paper also discusses the relationships between the FY-4B/AGRI SST and satellite zenith angle, water vapor content, wind speed, and in situ SST, which have an undeniable impact on the underestimation of the FY-4B/AGRI operational SST. The accuracy of the FY-4B/AGRI operational SST retrieval algorithm still needs to be further improved in the future. Full article

Accurate cloud detection is a crucial initial stage in optical satellite remote sensing. In this study, a daytime cloud mask model is proposed for the Advanced Geostationary Radiation Imager (AGRI) onboard the Fengyun 4A (FY-4A) satellite based on a deep learning approach. The model, named “Convolutional and Attention-based Cloud Mask Net (CACM-Net)”, was trained using the 2021 dataset with CALIPSO data as the truth value. Two CACM-Net models were trained based on a satellite zenith angle (SZA) < 70° and >70°, respectively. The study evaluated the National Satellite Meteorological Center (NSMC) cloud mask product and compared it with the method established in this paper. The results indicate that CACM-Net outperforms the NSMC cloud mask product overall. Specifically, in the SZA < 70° subset, CACM-Net enhances accuracy, precision, and F1 score by 4.8%, 7.3%, and 3.6%, respectively, while reducing the false alarm rate (FAR) by approximately 7.3%. In the SZA > 70° section, improvements of 12.2%, 19.5%, and 8% in accuracy, precision, and F1 score, respectively, were observed, with a 19.5% reduction in FAR compared to NSMC. An independent validation dataset for January–June 2023 further validates the performance of CACM-Net. The results show improvements of 3.5%, 2.2%, and 2.8% in accuracy, precision, and F1 scores for SZA < 70° and 7.8%, 11.3%, and 4.8% for SZA > 70°, respectively, along with reductions in FAR. Cross-comparison with other satellite cloud mask products reveals high levels of agreement, with 88.6% and 86.3% matching results with the MODIS and Himawari-9 products, respectively. These results confirm the reliability of the CACM-Net cloud mask model, which can produce stable and high-quality FY-4A AGRI cloud mask results. Full article

The traditional method for retrieving cloud optical thickness (COT) is carried out through a Look-Up Table (LUT). Researchers must make a series of idealized assumptions and conduct extensive observations and record features in this scenario, consuming considerable resources. The emergence of deep learning effectively addresses the shortcomings of the traditional approach. In this paper, we first propose a daytime (SOZA < 70°) COT retrieval algorithm based on FY-4A AGRI. We establish and train a Convolutional Neural Network (CNN) model for COT retrieval, CM4CR, with the CALIPSO’s COT product spatially and temporally synchronized as the ground truth. Then, a deep learning method extended from video prediction models is adopted to predict COT values based on the retrieval results obtained from CM4CR. The COT prediction model (CPM) consists of an encoder, a predictor, and a decoder. On this basis, we further incorporated a time embedding module to enhance the model’s ability to learn from irregular time intervals in the input COT sequence. During the training phase, we employed Charbonnier Loss and Edge Loss to enhance the model’s capability to represent COT details. Experiments indicate that our CM4CR outperforms existing COT retrieval methods, with predictions showing better performance across several metrics than other benchmark prediction models. Additionally, this paper also investigates the impact of different lengths of COT input sequences and the time intervals between adjacent frames of COT on prediction performance. Full article