Search Results (9)

Stretchable semiconductors capable of maintaining electrical performance under large mechanical deformation are essential for reliable wearable electronic devices. However, polymer semiconductors often suffer from electrical degradation when subjected to tensile strain. In this study, electrical stability under strain was achieved by using a rubber-blended poly(2,5-bis(2-octyldodecyl)-3,6-di(thiophen-2-yl)diketopyrrolo[3,4-c]pyrrole-1,4-dione-alt-thieno[3,2-b]thiophene) (DPPT-TT) polymer semiconductor based on a conjugated polymer/elastomer phase separation-induced elasticity (CONPHINE) structure. Unlike most previous studies on fully stretchable thin-film transistors (TFTs), which primarily report overall performance changes under mechanical strain, this work systematically identifies the dominant origin of electrical performance degradation through a stepwise electrical analysis encompassing the gate insulating layer, the semiconductor layer, and complete devices. Bottom-gate top-contact (BGTC) and bottom-gate bottom-contact (BGBC) devices were fabricated on rigid Si/SiO₂ substrates to examine the intrinsic properties of the DPPT-TT/styrene-ethylene-butylene-styrene (SEBS) CONPHINE film. As a result, the device exhibits 90% mobility retention even at 100% tensile strain applied parallel to the charge transport direction. Quantitative resistance analysis using the Y-function method reveals that variations in channel resistance play a dominant role in strain-induced performance degradation, whereas changes in contact resistance contribute only marginally. These findings demonstrate that stabilizing channel resistance, rather than contact resistance, is important for achieving high mobility retention under large mechanical deformation, thereby providing concrete and quantitative design guidelines for reliable stretchable TFTs. Full article

Bullous pemphigoid (BP), the most prevalent autoimmune blistering skin disorder, has been associated with dipeptidyl peptidase-4 inhibitor (DPP4i) treatment in type 2 diabetic patients. This study aimed to investigate the association of DPP4 gene variants, rs3788979 and rs12617656, with classic BP (cBP)- and DPP4i-associated BP predisposition. Fifty-six (56) unrelated patients with cBP, 32 DPP4i-associated BP patients, 60 healthy controls, and 49 diabetic patients receiving DPP4i were included. Genotyping was performed using polymerase chain reaction-restriction fragment length polymorphism assay (PCR-RFLP). Statistical analyses were conducted using SPSS software. For rs3788979, the CT+TT genotypes were significantly associated with increased risk of DPP4i-associated BP compared with cBP [(Odds Ratio (OR) = 2.80, 95% Confidence Interval (CI) = 1.07–7.35; p-value = 0.034] and healthy controls (OR = 0.30, 95% CI = 0.13–0.86; p-value = 0.020). The T allele was also enriched in DPP4i-associated BP (OR = 2.57, 95% CI = 1.09–6.07; p-value = 0.027). Additionally, the TC genotype of rs12617656 (OR = 2.29, 95% CI = 1.04–5.03, p-value = 0.039) showed significant association with cBP susceptibility. These findings highlight DPP4 variants as potential BP risk factors, supporting personalized risk assessment prior to initiating gliptin therapy. Large-scale studies are warranted to validate these associations. Full article

P-type polymer field-effect transistors (PFETs) achieve wide applications due to their environmental compatibility and inherent flexibility. However, the dielectric in PFETs presents a vulnerability that restricts the development of the advancement of p-type power devices and power integrated circuits with high voltage in power devices. In this work, we provide a novel method that employs p-type polymer DPPT-TT high-voltage PFETs with a stair gate dielectric structure (SGD) at both the source and drain sides. The breakdown voltage of this device is significantly increased, rising from 19 V to 80 V. This improvement is attributable to the SGD structure’s ability to reduce the electric field between the source and drain. Although the step gate length (L_SGD) is 50 μm, the on-state resistance only increases by 20% in comparison to conventional devices. The step region contributes an additional resistance of 2.5 × 10⁴ Ω/μm. The operational mechanism of the SGD PFET is demonstrated by TCAD simulations. Full article

Brain-inspired flexible neuromorphic devices are of great significance for next-generation high-efficiency wearable sensing and computing systems. In this paper, we propose a flexible organic electrochemical transistor using poly[(bithiophene)-alternate-(2,5-di(2-octyldodecyl)- 3,6-di(thienyl)-pyrrolyl pyrrolidone)] (DPPT-TT) as the organic semiconductor and poly(methyl methacrylate) (PMMA)/LiClO₄ solid-state electrolyte as the gate dielectric layer. Under gate voltage modulation, an electric double layer (EDL) forms between the dielectric layer and the channel, allowing the device to operate at low voltages. Furthermore, by leveraging the double layer effect and electrochemical doping within the device, we successfully mimic various synaptic behaviors, including excitatory post-synaptic currents (EPSC), paired-pulse facilitation (PPF), high-pass filtering characteristics, transitions from short-term plasticity (STP) to long-term plasticity (LTP), and demonstrate its image recognition and storage capabilities in a 3 × 3 array. Importantly, the device’s electrical performance remains stable even after bending, achieving ultra-low-power consumption of 2.08 fJ per synaptic event at −0.001 V. This research may contribute to the development of ultra-low-power neuromorphic computing, biomimetic robotics, and artificial intelligence. Full article

The selection of the π-conjugation spacers in semi-conducting polymer backbone is one of the important factors for determining the optoelectrical and morphological properties in organic photodiodes. To study the effects of π-conjugation spacers in donor–acceptor (D-A)-type alternating copolymers on their device performances in all-polymer-based photodiodes (all-PPDs), a series of diketopyrrolopyrrole (DPP)-based copolymers as polymer donors (P_Ds) were designed and synthesized. In detail, three different π-conjugation spacers, thiophene (T for P1), thienothiophene (TT for P2), and bithiophene (BT for P3), were incorporated into the DPP-based copolymer structures. Interestingly, all-PPDs based on the series of P1–P3 as P_Ds and N2200 as a polymer acceptor (P_A) exhibited totally distinct device performances in terms of external quantum efficiency (EQE), dark current density (J_D), and ideal detectivity (D*). The P1-based device showed suppressed J_D (6.1 × 10⁻¹¹ A/cm² at −1 V) compared to those of the P2- and P3-based devices due to the lower lying of the highest occupied molecular orbital (HOMO) level of P1. However, the P3-based all-PPD showed higher EQE (16% at 630 nm wavelength and −1 V) compared to those of the P1- and P2-based devices. And, it mainly originated from the better molecular packing and final blend film morphology, as confirmed by morphological analyses. Full article

Although advanced age, male sex, and some comorbidities impact the clinical course of COVID-19, these factors only partially explain the inter-individual variability in disease severity. Some studies have shown that genetic polymorphisms contribute to COVID-19 severity; however, the results are inconclusive. Thus, we investigated the association between polymorphisms in ACE1, ACE2, DPP9, IFIH1, IFNAR2, IFNL4, TLR3, TMPRSS2, and TYK2 and the clinical course of COVID-19. A total of 694 patients with COVID-19 were categorized as: (1) ward inpatients (moderate symptoms) or patients admitted at the intensive care unit (ICU; severe symptoms); and (2) survivors or non-survivors. In females, the rs1990760/IFIH1 T/T genotype was associated with risk of ICU admission and death. Moreover, the rs1799752/ACE1 Ins and rs12329760/TMPRSS2 T alleles were associated with risk of ICU admission. In non-white patients, the rs2236757/IFNAR2 A/A genotype was associated with risk of ICU admission, while the rs1799752/ACE1 Ins/Ins genotype, rs2236757/IFNAR2 A/A genotype, and rs12329760/TMPRSS2 T allele were associated with risk of death. Moreover, some of the analyzed polymorphisms interact in the risk of worse COVID-19 outcomes. In conclusion, this study shows an association of rs1799752/ACE1, rs1990760/IFIH1, rs2236757/IFNAR2, rs12329760/TMPRSS2, and rs2304256/TYK2 polymorphisms with worse COVID-19 outcomes, especially among female and non-white patients. Full article

Surface acoustic wave (SAW) sensors based on reduced graphene oxide/poly (diketopyrrolopyrrolethiophene-thieno [3,2-b]thiophene-thiophene) (rGO/DPP2T-TT) composite sensing films for the detection of ammonia were investigated at room temperature in this study. The rGO/DPP2T-TT composite films were deposited onto ST-X quartz SAW resonators by a drop-casting method. FESEM, EDS, and XRD characterizations showed that the rGO/DPP2T-TT composite film was successfully synthesized and exhibited numerous wrinkles and a rough structure, which are crucial for gas adsorption. The frequency response to 500–1400 ppb ammonia shown by the prepared SAW sensor coated with rGO/DPP2T-TT composite film increased linearly as the ammonia concentration increased. The sensor based on a rGO/DPP2T-TT composite film exhibited a positive frequency shift of 55 Hz/ppm, and its frequency response to 500 ppb ammonia was 35 Hz. The sensors thus show promising potential in detecting sub-ppm concentration levels of NH₃ at room temperature, which opens up possibilities for applications in the noninvasive detection of NH₃ in the breath. As a result, the rGO/DPP2T-TT composite sensor can be a good candidate for in situ medical diagnosis and indoor/outdoor environment monitoring. Full article

GLP-1 receptor agonists stimulate GLP-1R to promote insulin secretion, whereas DPP4 inhibitors slow GLP-1 degradation. Both approaches are incretin-based therapies for T2D. In addition to GLP-1 analogs, small nonpeptide GLP-1RAs such as LY3502970, TT-OAD2, and PF-06882961 have been considered as possible therapeutic alternatives. Pseudostellaria heterophylla, Linum usitatissimum, and Drymaria diandra are plants rich in cyclopeptides with hypoglycemic effects. Our previous study demonstrated the potential of their cyclopeptides for DPP4 inhibition. Reports of cyclic setmelanotide as an MC4R (GPCR) agonist and cyclic α-conotoxin chimeras as GLP-1RAs led to docking studies of these cyclopeptides with GLP-1R. Heterophyllin B, Pseudostellarin B, Cyclolinopeptide B, Cyclolinopeptide C, Drymarin A, and Diandrine C are abundant in these plants, with binding affinities of −9.5, −10.4, −10.3, −10.6, −11.2, and −11.9 kcal/mol, respectively. The configuration they demonstrated established multiple hydrogen bonds with the transmembrane region of GLP-1R. DdC:(cyclo)-GGPYWP showed the most promising docking score. The results suggest that, in addition to DPP4, GLP-1R may be a hypoglycemic target of these cyclopeptides. This may bring about more discussion of plant cyclopeptides as GLP-1RAs. Moreover, peptides derived from the HB precursor (IFGGLPPP), including IFGGWPPP, IFPGWPPP, IFGGYWPPP, and IFGYGWPPPP, exhibited diverse interactions with GLP-1R and displayed backbones available for further research. Full article

Low power gas sensors with high sensitivity and selectivity are desired for many practical applications. Devices based on organic field effect transistors are promising because they can be fabricated at modest cost and are low power devices. Organic field effect transistors fabricated in bottom-gate bottom-contact configuration using the organic semiconductor [2,5-(2-octyldodecyl)-3,6-diketopyrrolopyrrole-alt-5,5-(2,5-di(thien-2-yl)thieno] [3,2-b]thiophene) (DPP-T-TT) were systematically investigated to determine the response characteristics to a series of alkylamines and ammonia. The highest sensitivity was to dibutylamine with a limit of detection of 0.025 ppb, followed by n-butylamine, 0.056 ppb, and ammonia, 2.17 ppb. A model was constructed based on the Antoine equation that successfully allows the empirical prediction of the sensitivity and selectivity of the gas sensor to various analytes including amines and alcohols based on the Antoine C parameter and the heat of the vaporization of the analyte. Full article