Search Results (20)

Azaspiracids are a type of polyether toxin. Currently, the existing detection methods for azaspiracids all have certain drawbacks. Aptamers offer a cost-effective and convenient approach for the detection of azaspiracids. By employing the Capture-SELEX (Systematic evolution of ligands by exponential enrichment) method to screen aptamers specific to azaspiracid-2, a high-affinity aptamer can be identified for toxin detection. The bin ding affinity of the toxin is verified using biolayer interferometry (BLI) technology. Additionally, computer simulations are utilized to explore the binding sites of the aptamer and conduct molecular dynamics simulations to investigate the stability of the aptamer–toxin complex. Further optimization of the obtained aptamers is carried out to enhance their affinity for the toxin. Ultimately, two aptamers, JD2-RM3-27C28T and JD3-RMM1, are obtained, with dissociation constants (K_D) improved by two orders of magnitude (K_D = 8.7 × 10⁻⁸ M and K_D = 6.8 × 10⁻⁸ M, respectively). These aptamers have the advantage of being incorporated into a new AZA2 assay that is more accurate and ethical than biological monitoring methods, and more economical than LC-MS. In the future, this is expected to demonstrate significant advantages in the fields of food safety, environmental toxin monitoring, toxin exposure diagnosis, and public health monitoring. Full article

Deltamethrin (Del), a widely utilized pyrethroid pesticide, exhibits significant risks to human health due to its persistent environmental residues. This study aims to develop an efficient sensing detector for rapid Del detection through aptamer-based recognition. A modified Capture-SELEX strategy successfully identified Del-1, a high-affinity DNA aptamer demonstrating specific binding to Del with a dissociation constant (Kd) of 82.90 ± 6.272 nM. Molecular docking analysis revealed strong intermolecular interactions between Del-1 and Del, exhibiting a favorable binding energy of −7.35 kcal·mol⁻¹. Leveraging these findings, we constructed a colorimetric detector using gold nanoparticles (AuNPs) and poly dimethyl diallyl ammonium chloride (PDDA)-mediated aggregation modulation. The sensing detector employed dual detection parameters: (1) a characteristic color transition from red to blue and (2) a quantitative ∆A650/A520 ratio measurement. This optimized system achieved a detection limit of 54.57 ng·mL⁻¹ with exceptional specificity against other competitive pesticides. Practical validation using spiked fruit samples (apples and pears) yielded satisfactory recoveries of 74–118%, demonstrating the sensor’s reliability in real-sample analysis. The developed methodology presents a promising approach for the on-site monitoring of pyrethroid contaminants in agricultural products. Full article

Chronic immunoinflammatory rheumatic diseases, such as axial spondyloarthritis (AxSpA), are accompanied by a dysregulation of bone remodeling. Among potential biomarkers of bone metabolism, the Wnt pathway antagonist, Dickkopf-1 (DKK-1), is of particular interest because of its potential to reflect a shift towards joint ossification or osteoporosis, but its diagnostic value needs validation. There is still a lack of stable and efficient methods of measuring serum DKK-1 levels suitable for longitude studies. The use of aptamer-based diagnostic assays could be very promising for this purpose. We generated novel anti-DKK-1 DNA aptamers from a combinatorial library with a pre-defined sequence pattern in the randomized region. This approach showed high efficacy, as only four SELEX rounds of selection produced high-affinity aptamers with dissociation constants ranging from 1.3 to 3.7 nM. A family of their truncated versions was also developed by rational design. Novel DNA aptamers functioned as capture components in a microplate ELISA-like assay with HRP-conjugated anti-DKK-1 antibody as a reporter component. We succeeded in revealing the aptamer/aptamer sandwich pairs that provided an aptamer-only sandwich colorimetric assay. The aptamer/antibody colorimetric test systems were also examined in the analyses of blood serum from AxSpA patients and shown sufficient workability. However, in a number of cases we registered significant differences between assays based on TD10 and DK4 aptamers and made some suggestions about the origin of this effect. Full article

To combat the growing threat of antibiotic resistance, environmental testing for antibiotic contamination is gaining an increasing role. This study aims to develop an easy-to-use assay for the detection of the fluoroquinolone antibiotic levofloxacin. Levofloxacin is used in human and veterinary medicine and has been detected in wastewater and river water. An RNA aptamer against levofloxacin was selected using RNA Capture-SELEX. The 73 nt long aptamer folds into three stems with a central three-way junction. It binds levofloxacin with a K_d of 6 µM and discriminates the closely related compound ciprofloxacin. Furthermore, the selection process was analyzed using a next-generation sequencing approach to better understand the sequence evolution throughout the selection. The aptamer was used as a bioreceptor for the development of a lateral flow assay. The biosensor exploited the innate characteristic of RNA Capture-SELEX to select aptamers that displace a complementary DNA oligonucleotide upon ligand binding. The lateral flow assay achieved a limit of visual detection of 100 µM. While the sensitivity of this assay constrains its immediate use in environmental testing, the present study can serve as a template for the selection of RNA aptamer-based biosensors. Full article

Bio-SELEX is a revolutionary method for the discovery of novel biomarkers within biological samples, offering profound insights into diagnosing both infectious and non-infectious diseases. This innovative strategy involves three crucial steps: Traditional SELEX, Pull Down, and mass spectrometry. Firstly, Traditional SELEX involves the systematic selection of specific nucleic acid sequences (aptamers) that bind to the target molecules of interest. These aptamers are generated through iterative rounds of selection, amplification, and enrichment, ultimately yielding highly selective ligands. Secondly, the Pull-Down phase employs these aptamers to capture and isolate the target biomarkers from complex biological samples. This step ensures the specificity of the selected aptamers in binding to their intended targets. Lastly, mass spectrometry is utilized to identify and quantify the captured biomarkers, providing precise information about their presence and concentration in the sample. These quantitative data are invaluable in disease diagnosis and monitoring. Bio-SELEX’s significance lies in its ability to discover biomarkers for a wide range of diseases, spanning infectious and non-infectious conditions. This approach holds great promise for early disease detection, personalized medicine, and the development of targeted therapies. By harnessing the power of aptamers and mass spectrometry, Bio-SELEX advances our understanding of disease biology and opens new avenues for improved healthcare. Full article

A capture systematic evolution of ligands by exponential enrichment (Capture-SELEX) was described to discover novel aptamers specific for 5-hydroxymethylfurfural (5-HMF), and a biosensor based on molecular beacon was constructed to detect 5-HMF. The ssDNA library was immobilized to streptavidin (SA) resin to select the specific aptamer. The selection progress was monitored using real-time quantitative PCR (Q-PCR), and the enriched library was sequenced by high-throughput sequencing (HTS). Candidate and mutant aptamers were selected and identified by Isothermal Titration Calorimetry (ITC). The FAM-aptamer and BHQ1-cDNA were designed as the quenching biosensor to detect 5-HMF in milk matrix. After the 18th round selection, the Ct value decreased from 9.09 to 8.79, indicating that the library was enriched. The HTS results indicated that the total sequence numbers for 9th, 13th, 16th, and 18th were 417054, 407987, 307666, and 259867, but the number of sequences for the top 300 sequences was gradually increased from 9th to 18th, and the ClustalX2 analysis showed that there were four families with high homology rate. ITC results indicated that the K_d values of H1 and its mutants H1-8, H1-12, H1-14, and H1-21 were 2.5 μM, 1.8 μM, 1.2 μM, 6.5 μM, and 4.7 μM. The linear range of the quenching biosensor was from 0 μM to 75 μM, and it had a similar linear range in the 0.1% milk matrix. This is the first report to select a novel aptamer specific for 5-HMF and develop quenching biosensor for the rapid detection of 5-HMF in milk matrix. Full article

Dengue infection, caused by the dengue virus, is a global threat which requires immediate attention and appropriate disease management. The current diagnosis of dengue infection is largely based on viral isolation, RT-PCR and serology-based detection, which are time-consuming and expensive, and require trained personnel. For early diagnosis of dengue, the direct detection of a dengue antigenic target is efficacious, and one such target is NS1. NS1-based detection is primarily antibody-centric and is beset by drawbacks pertaining to antibodies such as the high cost of synthesis and large batch-to-batch variation. Aptamers are potential surrogates of antibodies and are much cheaper, without exhibiting batch-to-batch variation. Given these advantages, we sought to isolate RNA aptamers against the NS1 protein of dengue virus serotype 2. A total of 11 cycles of SELEX were carried out, resulting in two potent aptamers, DENV-3 and DENV-6, with dissociation constant values estimated at 37.57 ± 10.34 nM and 41.40 ± 9.29 nM, respectively. These aptamers can be further miniaturized to TDENV-3 and TDENV-6a with an increased LOD upon their usage in direct ELASA. Moreover, these truncated aptamers are highly specific against the dengue NS1 while showing no cross-reactivity against the NS1 of the Zika virus, the E2 protein of the Chikungunya virus or the LipL32 protein of Leptospira, with target selectivity retained even in human serum. The usage of TDENV-3 as the capturing probe and TDENV-6a as the detection probe underpinned the development of an aptamer-based sandwich ELASA for the detection of dengue NS1. The sensitivity of the sandwich ELASA was further improved with the stabilization of the truncated aptamers and the repeated incubation strategy, which enabled a LOD of 2 nM when used with the target NS1 spiked in human serum diluted at 1:2000. Full article

Thiamethoxam, a nicotinic pesticide used worldwide, can cause great harm to the environment and even to human health, and aptamers, known as chemical antibodies, have high affinity and specificity for the target, as well as great potential in detecting small molecules such as pesticides. In this paper, we report a highly sensitive biosensor system for thiamethoxam residue detection based on aptamer technology. After 15 rounds of screening with the pressurized GO-SELEX technology, we found that the aptamer libraries of the 5th and 9th rounds showed high affinity by the capture method. Four candidate aptamers were obtained by high-throughput sequencing and secondary structure prediction. Among them, the aptamer named Thi-5R-18 from the 5th round was demonstrated to possess the highest affinity by isothermal titration calorimetry, with a dissociation constant (Kd) of 4.935 × 10⁻⁵ M. The results of molecular docking showed that thiamethoxam and Thi-5R-18 were combined with bases G-15, A-19, and T-71 through hydrogen bonding and π–π interaction.Thi-5R-18 was used as a recognition element to construct a AuNPs colorimetric aptasensor, achieving an ultralow detection limit of 0.37 nM. More importantly, this colorimetric aptasensor can be used for quantitative detection of thiamethoxam on tea leaves, with a recovery of 96.94%~105.86%. This study provides a highly sensitive biosensor for detection of thiamethoxam residue. Full article

Small-molecule contaminants, such as antibiotics, pesticides, and plasticizers, have emerged as one of the substances most detrimental to human health and the environment. Therefore, it is crucial to develop low-cost, user-friendly, and portable biosensors capable of rapidly detecting these contaminants. Antibodies have traditionally been used as biorecognition elements. However, aptamers have recently been applied as biorecognition elements in aptamer-based biosensors, also known as aptasensors. The systematic evolution of ligands by exponential enrichment (SELEX) is an in vitro technique used to generate aptamers that bind their targets with high affinity and specificity. Over the past decade, a modified SELEX method known as Capture-SELEX has been widely used to generate DNA or RNA aptamers that bind small molecules. In this review, we summarize the recent strategies used for Capture-SELEX, describe the methods commonly used for detecting and characterizing small-molecule–aptamer interactions, and discuss the development of aptamer-based biosensors for various applications. We also discuss the challenges of the Capture-SELEX platform and biosensor development and the possibilities for their future application. Full article

With the incidence of harmful algal blooms (HABs) increasing in recent years, the urgent demand for the detection of domoic acid (DA), an amnesic shellfish toxin mainly produced by red tide algae Pseudonitzschia, has aroused increasing attention. Aptamers, a new molecular recognition element, provide clarity in the monitoring of DA. In this study, aptamers of DA were successfully screened by Capture-SELEX. Through identification and truncation optimization, aptamer C1-d with a high affinity (K_D value, 109 nM) and high specificity for DA was obtained. The binding mechanism between DA and the aptamer was explored by molecular docking and molecular dynamics (MD) simulation, revealing the critical sites for DA–aptamer interaction. Meanwhile, a BLI-based aptasensor was constructed by C1-d, which displayed a linear range from 0.625 to 10 μM and a LOD of 13.7 nM. This aptasensor exhibited high specificity, good precision and repeatability, and high recovery rates for real samples; the process of detection could be completed in 7 min. This study is the first to identify and investigate the binding mechanism of DA–aptamer interaction and constructed a BLI-based aptasensor for DA, which lays a theoretical foundation for the detection and prevention of DA. Full article

Limitations in the detection of cocirculating flaviviruses such as Dengue and Zika lead us to propose the use of aptameric capture of the viral RNA in combination with RT-PCR (APTA-RT-PCR). Aptamers were obtained via SELEX and next-generation sequencing, followed by colorimetric and fluorescent characterizations. An APTA-RT-PCR assay was developed, optimized, and tested against the viral RNAs in 108 serum samples. After selection, sequence APTAZC10 was designed as a bifunctional molecular beacon (APTAZC10-MB), exhibiting affinity for the viral targets. APTA-RT-PCR was able to detect Dengue and Zika RNA in 43% and 8% of samples, respectively. Our results indicate that APTAZC10-MB and APTA-RT-PCR will be useful to improve the detection of Dengue and Zika viruses in a fast molecular assay for the improvement of infectious disease surveillance. Full article

Zika virus became a major public health problem in early 2015, when cases of Guillain–Barré syndrome and microcephaly were associated with viral infection. Currently, ZIKV is endemic in all tropical areas of the world, and the chance for future Zika epidemics remains very real and accurate diagnosis is crucial. The aim of this work was to select specific ssDNA aptamers that bind to the entire Zika virus and can be used to compose specific diagnostics, without cross-reactivity with other flaviviruses. Zika virus was cultivated in Vero cells and used as a target for aptamer selection. Aptamers specific for the ZIKV were selected using whole-virus SELEX, with counterselection for other flavivirus. Secondary and tertiary structures were evaluated and the molecular anchoring between the aptamers and target were simulated by the HDOCK server. Aptamer interaction was evaluated by ELISA/ELASA and the dissociation constant (Kd) was calculated by thermophoresis. Four ZIKV-specific aptamers were selected. The best two were further characterized and proved to be specific for ZIKV. Aptamers are capable of binding specifically to the ZIKV and differentiate from Dengue virus. The aptamers selected in this work can be used as capture agents in the composition of diagnostic tests to specifically detect ZIKV infection. Full article

Malachite green oxalate (MG) is a kind of veterinary drug, which is freely soluble in water and hazardous to aquatic products, resulting in food toxicity and human health problems. The demand for effective and sensitive detection of MG residues is increasing in food safety. In this work, three DNA aptamers MG-36-12/16/17 targeting MG with good affinity (K_d values were 169.78, 71.94, and 102.46 μM, respectively) were obtained by Capture-SELEX. Furthermore, MG-36-12, MG-76-16-6A, and MG-36-17 were found to perform sensitively and specifically to detect MG as a sensing probe in a FRET fluorescent aptasensor, where the FAM-labeled aptamer and GO were employed as efficient energy donor–acceptor pair. The linear range of this aptasensor using aptamer MG-36-12 was from 1.71 to 514.29 ng/mL and the LOD was as low as 0.79 ng/mL. Additionally, the fluorescent assay using aptamer MG-36-17 to detect MG exhibited a linear relationship from 1.71 to 857.14 ng/mL and a LOD of 2.13 ng/mL. Meanwhile, the aptasensor showed high specificity to MG with no cross-reactivity to other veterinary drugs and had a mean recovery of 81.54% to 100.96% in actual water samples from the aquatic product market. Full article

Gymnodimines (GYMs), belonging to cyclic imines (CIs), are characterized as fast-acting toxins, and may pose potential risks to human health and the aquaculture industry through the contamination of sea food. The existing detection methods of GYMs have certain defects in practice, such as ethical problems or the requirement of complicated equipment. As novel molecular recognition elements, aptamers have been applied in many areas, including the detection of marine biotoxins. However, GYMs are liposoluble molecules with low molecular weight and limited numbers of chemical groups, which are considered as “challenging” targets for aptamers selection. In this study, Capture-SELEX was used as the main strategy in screening aptamers targeting gymnodimine-A (GYM-A), and an aptamer named G48nop, with the highest K_D value of 95.30 nM, was successfully obtained by screening and optimization. G48nop showed high specificity towards GYM-A. Based on this, a novel aptasensor based on biolayer interferometry (BLI) technology was established in detecting GYM-A. This aptasensor showed a detection range from 55 to 1400 nM (linear range from 55 to 875 nM) and a limit of detection (LOD) of 6.21 nM. Spiking experiments in real samples indicated the recovery rate of this aptasensor, ranging from 96.65% to 109.67%. This is the first study to report an aptamer with high affinity and specificity for the challenging marine biotoxin GYM-A, and the new established aptasensor may be used as a reliable and efficient tool for the detection and monitoring of GYMs in the future. Full article

Furaneol is an aroma compound which occurs naturally in foods and is used as an artificial flavor. Detection of furaneol is required in food science and food processing industry. Capture- Systematic Evolution of Ligands by EXponential enrichment (SELEX) protocol was applied for the isolation of an aptamer binding to furaneol, a small volatile organic substance contributing to the flavor of various products. Thirteen cycles of selection were performed. The resulting DNA pool was cloned, using blunt-end cloning, and ninety-six plasmids were sequenced and analyzed. Eight oligonucleotides were selected as aptamer candidates and screened for the ability to bind to furaneol, using three different methods—magnetic-beads associated elution assay, SYBR Green I assay, and exonuclease protection assay. One of the candidates was further characterized as an aptamer. The apparent equilibrium constant was determined to be (1.1 ± 0.4) µM, by the fluorescent method. The reported aptamer was applied for development of the ion-sensitive field-effect transistor (ISFET)-based biosensor, for the analysis of furaneol, in the concentration range of 0.1–10 µM. Full article