Search Results (21)

Image-assisted digital shade guides are increasingly popular for shade matching; however, research on their accuracy remains limited. This study aimed to compare the accuracy and reliability of color coordination in image-assisted digital shade guides constructed using calibrated images of their shade tabs captured by a mirrorless camera (Canon, Tokyo, Japan) (MC-DSG) and a smartphone camera (Samsung, Seoul, Korea) (SC-DSG), using a spectrophotometer as the reference standard. Twenty-nine VITA Linearguide 3D-Master shade tabs were photographed under controlled settings with both cameras equipped with cross-polarizing filters. Images were calibrated using Adobe Photoshop (Adobe Inc., San Jose, CA, USA). The L* (lightness), a* (red-green chromaticity), and b* (yellow-blue chromaticity) values, which represent the color attributes in the CIELAB color space, were computed at the middle third of each shade tab using Adobe Photoshop. Specifically, L* indicates the brightness of a color (ranging from black [0] to white [100]), a* denotes the position between red (+a*) and green (–a*), and b* represents the position between yellow (+b*) and blue (–b*). These values were used to quantify tooth shade and compare them to reference measurements obtained from a spectrophotometer (VITA Easyshade V, VITA Zahnfabrik, Bad Säckingen, Germany). Mean color differences (∆E₀₀) between MC-DSG and SC-DSG, relative to the spectrophotometer, were compared using a independent t-test. The ∆E₀₀ values were also evaluated against perceptibility (PT = 0.8) and acceptability (AT = 1.8) thresholds. Reliability was evaluated using intraclass correlation coefficients (ICC), and group differences were analyzed via one-way ANOVA and Bonferroni post hoc tests (α = 0.05). SC-DSG showed significantly lower ΔE₀₀ deviations than MC-DSG (p < 0.001), falling within acceptable clinical AT. The L* values from MC-DSG were significantly higher than SC-DSG (p = 0.024). All methods showed excellent reliability (ICC > 0.9). The findings support the potential of smartphone image-assisted digital shade guides for accurate and reliable tooth shade assessment. Full article

The purpose of the research is to identify the features of development of a pattern of green infrastructure of megapolises as a basis of sustainable development. The advancement algorithm of green infrastructure of megapolises is implemented for the first time and it is a scientific novelty. The structural features of green infrastructure, namely the division of surface elements into central and peripheral cores, and the division of linear elements into natural and natural–artificial corridors are highlighted by means of an example of Shymkent city, (Republic of Kazakhstan). Their maps were made taking into account the territorial and industrialized structure. Proposals were made to improve the functioning of the green infrastructure of Shymkent city, promoting sustainable development and creating a population-friendly environment. The analysis of green infrastructure and the impact of socio-economic and demographic infrastructure on the environment was carried out on the advancement of the green infrastructure of megapolises; the main methodological principles were determined. The statistical, cartographic, analytical, comparative and empirical methods were used in this research. The work was carried out using the following software: CorelDraw X4, Microsoft Word, Microsoft Excel, 2Gis 3.16, Adobe Photoshop. Full article

Background/Objectives: The purpose of this in vitro study was to evaluate and compare the internal adaptation and cement film thickness of cast-gold custom post and core (CPC), three-dimensionally (3D)-printed titanium (Ti) CPC, and milled Ti CPC. Methods: Forty-eight 3D printed resin models, simulating a tooth prepared to receive a CPC, were fabricated. Models were randomly assigned to one of three groups (n = 16 per group): (A) cast-gold CPC (control group), (B) 3D-printed Ti CPC, and (C) milled Ti CPC. Following the manufacturing of CPCs, each CPC was cemented using dual-cure polymerizing resin cement. Then, each model/post-and-core assembly was sectioned at the coronal, middle, and apical thirds of the post at a specific point. Each section was photographed using a microscope in a standardized setting (25×). The pixel count for cement surface area was calculated for each image using Adobe Photoshop software. Descriptive statistics of the mean and standard deviation of the cement film thickness around posts were calculated. Kruskal–Wallis and Dwass–Steel–Critchlow–Fligner tests were used for statistical analysis, with a significance level of α = 0.05. Results: Pairwise comparisons in the coronal section revealed a statistically significant difference (p < 0.05) between groups A and B and groups B and C. In the middle section, there was a statistically significant difference (p < 0.05) between groups A and B only. In the apical section, there was a statistically significant difference (p < 0.05) between all groups. Conclusions: Within the limitation of the present study, neither 3D printed nor milled Ti CPC could achieve comparable cement film thickness to cast-gold CPC in all three sections. Cast-gold CPC cement film thickness was found to be more reduced and consistent, thus having superior internal adaptation to 3D-printed and milled Ti CPCs. Full article

Introduction: Dental occlusion refers to the static and dynamic relationships that are established between the teeth of the two arches and is an important factor in the homeostasis of the dento-maxillary system. The objective of the present study was to compare two digital occlusal analysis systems: the T-Scan III system and the Medit I600 intraoral scanner. Materials and Methods: The study was carried out on 20 students from the Faculty of Dental Medicine Craiova, whose dental occlusion was assessed with the T-Scan III system and with the Medit I600 intraoral scanner. Dental occlusion was assessed in the maximum intercuspation position, the edge-to-edge protrusion position, and the edge-to-edge position in right and left laterotrusion. The images of the 2D occlusal contact areas obtained by both methods were converted to .jpeg format and then transferred to Adobe Photoshop CS6 2021 (Adobe Systems, San Jose, CA, USA) for comparison. The recorded data were statistically processed. Results: Analyzing the data provided by the two digital occlusal analysis systems, it was found that the T-Scan III system provided data related to the amplitude of the occlusal forces, the surface on which they were distributed (the contact surface), the dynamics of the occlusal contacts, and the proportion in which they were distributed at the level of the two hemiarches, and the Medit I600 intraoral scanner performed an evaluation of the occlusal interface of the two arches, highlighting the extent of the contact areas with the degree of overlapping of the occlusal components. Although both methods of occlusal analysis recorded the highest values for the maximum intercuspation position, the results could not be compared. Conclusions: The two digital systems provide different data in occlusal analysis. As the T-Scan III system is considered the gold standard for occlusal analysis, more studies are needed to understand the data provided by the Medit I600 intraoral scanner and their significance. Full article

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4^® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990–0.999). The determination coefficients (R²) suggested that only 30–35% of the actual age results could be explained by the pulp/tooth ratio. The smallest differences were observed with Cameriere’s formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (−12.1 years) populations. (4) Conclusions: The equations employed showed little agreement between the actual age and the estimated age. Full article

Bisphenol A diglycidyl ether (BADGE) is widely present in the inner coating of metal food cans, from which it can migrate into food and generate harmful derivatives during storage, such as bisphenol A (2,3-dihydroxypropyl) glycidyl ether, bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether, and bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether. Here, a gold-nanoparticle-based immunochromatographic strip assay based on a broad-spectrum polyclonal antibody was developed for the simultaneous detection of BADGE and its derivatives, which could be accomplished within 15 min. The quantitative analysis of the visualization results was performed using Adobe Photoshop CC 2021, and the detection limit, defined as the concentration causing 15% inhibition, was 0.97 ng/mL. The recoveries of BADGE and its derivatives at various spiking levels in canned food samples ranged from 79.86% to 93.81%. The detection results of the proposed immunochromatographic strip assay were validated via high-performance liquid chromatography, showing a good correlation coefficient (R² = 0.9580). Full article

(1) Background: Facial scanners are used in different fields of dentistry to digitalize the soft tissues of the patient’s face. The development of technology has allowed the patient to have a 3-dimensional virtual representation, facilitating facial integration in the diagnosis and treatment plan. However, the accuracy of the facial scanner and the obtaining of better results with respect to the manual or two-dimensional (2D) method are questionable. The objective of this clinical trial was to evaluate the usefulness and accuracy of the 3D method (a dual-structured light facial scanner) and compare it with the 2D method (photography) to obtain facial analysis in the maximum intercuspation position and smile position. (2) Methods: A total of 60 participants were included, and nine facial landmarks and five interlandmarks distances were determined by two independent calibrated operators for each participant. All measurements were made using three methods: the manual method (manual measurement), the 2D method (photography), and the 3D method (facial scanner). All clinical and lighting conditions, as well as the specific parameters of each method, were standardized and controlled. The facial interlandmark distances were made by using a digital caliper, a 2D software program (Adobe Photoshop, version 21.0.2), and a 3D software program (Meshlab, version 2020.12), respectively. The data were analyzed by SPSS statistical software. The Kolmogorov–Smirnov test revealed that trueness and precision values were normally distributed (p > 0.05), so a Student’s t-test was employed. (3) Results: Statistically significant differences (p ≤ 0.01) were observed in all interlandmark measurements in the 2D group (photography) to compare with the manual group. The 2D method obtained a mean accuracy value of 2.09 (±3.38) and 2.494 (±3.67) in maximum intercuspation and smile, respectively. On the other hand, the 3D method (facial scanner) obtained a mean accuracy value of 0.61 (±1.65) and 0.28 (±2.03) in maximum intercuspation and smile, respectively. There were no statistically significant differences with the manual method. (4) Conclusions: The employed technique demonstrated that it influences the accuracy of facial records. The 3D method reported acceptable accuracy values, while the 2D method showed discrepancies over the clinically acceptable limits. Full article

In this work, indoxyl-glucoside was used as the substrate to develop a cost-effective, paper-based analytical device for the fluorescent and colorimetric dual-mode detection of β-glucosidase activity through a smartphone. The β-glucosidase can hydrolyze the colorless substrate indoxyl-glucoside to release indoxyl, which will be self-oxidized to generate green products in the presence of oxygen. Meanwhile, the green products emit bright blue-green fluorescence under ultraviolet–visible light irradiation at 365 nm. Fluorescent or colorimetric images were obtained by a smartphone, and the red-green-blue channels were analyzed by the Adobe Photoshop to quantify the β-glucosidase activity. Under the optimum conditions, the relative fluorescent and colorimetric signals have a good linear relationship with the activity of β-glucosidase, in the range of 0.01–1.00 U/mL and 0.25–5.00 U/mL, and the limits of detection are 0.005 U/mL and 0.0668 U/mL, respectively. The activities of β-glucosidase in a crude almond sample measured by the fluorescent and colorimetric methods were 23.62 ± 0.53 U/mL and 23.86 ± 0.25 U/mL, respectively. In addition, the spiked recoveries of normal human serum and crude almond samples were between 87.5% and 118.0%. In short, the paper-based device, combined with a smartphone, can provide a simple, environmentally friendly, and low-cost method for the fluorescent and colorimetric dual-mode detection of β-glucosidase activity. Full article

Phalangeal fractures are common events among the upper limbs accounting for 10% of all human body fractures. Fracture complete healing process may persevere several months or years. Most phalangeal fractures present favorable union within 3 to 6 weeks. In the literature, biophysical stimulation has yielded favorable outcomes in the treatment of hand fractures. A survey involving hospitals in the US reported the use of biophysical stimulation (72%) in relation to nonhealing fractures at three months after trauma. A noninvasive procedure such as biophysical stimulation may be preferential prior to consideration of invasive procedures. In this retrospective study, we analyzed 80 phalangeal fractures, 43 of which did not show any radiographic sign of healing 30 days after surgery; on radiograms, we calculated radiographic data and the total active motion (TAM) for clinical comparison. All radiographic images were evaluated using Adobe Photoshop CS3 (version 10.0, Adobe Systems Inc., San Jose, CA, USA). We calculated the index of relative bone healing each month after surgery starting from 30 days, which was considered as T1, and followed up for a total of 6 months after stimulation (T6) with better results in stimulated groups. We concluded that prompt administration of biophysical stimulation supports fracture healing and yields an important improvement in the union rate compared with nontreatment. Above all, our patients experienced less injury-related distress between the fracture and repair period, which consequently reduced immobilization time, envisaging an early rehabilitation interval, with a better patient hand outcome. Full article

In this study, a paper-based sensor was developed for the detection of hydrogen-peroxide-related biomarkers, with glucose oxidase catalyzing as an example. Potassium iodide can catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine in the presence of hydrogen peroxide to colorize the paper-based biosensor detection area, which was imaged by a scanner, and the color intensity was analyzed by the Adobe Photoshop. Under the optimal conditions, the color intensity shows a good linear relationship with hydrogen peroxide and glucose concentrations in the ranges of 0.1–5.0 mM and 0.5–6.0 mM, respectively. The detection limit of hydrogen peroxide is 0.03 mM and the limit of quantification of glucose is 0.5 mM. Besides, the method was employed in measuring glucose concentration in fruit samples, and the spiked recoveries are in the range of 95.4–106.1%. This method is cost-effective, environmentally friendly, and easy to be operated, which is expected to realize the point-of-care testing of more hydrogen-peroxide-related biomarkers. Full article

This study aimed to evaluate the color change of teeth bleached with light activation using two different objective color measurement approaches after two years of clinical follow-up. A cross-sectional retrospective clinical study according to STROBE was followed including 30 participants. The 25% hydrogen peroxide gel (Philips Zoom) was applied with a supplementary LED light for 15 min in four cycles. Tooth color was assessed based on CIEL*a*b* values using a spectrophotometer (Spectroshade) at different time points (baseline, post bleaching, 1 week, 1 year, and 2 years). Standardized digital photographs were taken at each time point. The L*, a*, and b* values were measured from the digital photographs using Adobe Photoshop software. The color difference (ΔE) was separately calculated using the L*, a*, and b* values obtained with spectrophotometric and photographic analyses at each evaluation time. Data were analyzed with non-parametric tests (p < 0.05). A color regression was detected by both measurement approaches after 1 and 2 years (p < 0.05). Greater ΔE values were acquired with the spectrophotometer compared to the digital photographic analysis (p < 0.05). Although a greater color change was observed with the spectrophotometer, both approaches were able to detect the color rebound using the 25% hydrogen peroxide light-activated in-office system. Digital photographic analysis might therefore be used to assess color change after bleaching. Full article

The Lower Paleozoic carbonate reservoir in the Tarim Basin is a hotspot area for deep oil and gas exploration in China. Although the Lower Cambrian of the Bachu Uplift has not encountered industrial oil flow, rich bitumen has been found there. As the most direct trace of petroleum migration, the effective identification of bitumen is the key to studying the hydrocarbon transportation path. In this study, the Adobe Photoshop quantification (PSQ) method is used to identify the bitumen content in the Xiaoerblak Formation in Well Shutan 1, and, combined with the bitumen characteristics of the Shihuiyao section, a high-quality petroleum transverse transport layer is determined. The results indicate the following: (1) In Well Shutan 1, bitumen is mainly concentrated in the middle and upper parts of the Xiaoerblak Formation with high porosity and high permeability. (2) The shale of the Yuertus Formation in the Shihuiyao section has low hydrocarbon generation potential. However, the overlying Xiaoerblak Formation has developed multistage bituminous veins and bitumen-encapsulated gravels, which is the result of multiple instances of horizontal hydrocarbon migration. (3) After combining the bitumen characteristics of Well Shutan 1 and the Shihuiyao section, it is confirmed that there are high-quality lateral transport conductors in the middle and upper parts of the Xiaoerblak Formation, and the Subsalt Cambrian dolomite reservoir has great exploration potential. Full article

Biological imaging is an essential tool to visualise and obtain reference data. In this context, the programme ImageJ has been widely used in many disciplines to determine the surface areas of planar biological samples in marine and aquatic experimental biology. Despite its range of advantages, ImageJ is relatively time-consuming, because of the need to manually select the target areas for quantification. Hence, we here evaluated the freeware programme Photopea as a potential alternative by comparing the accuracy and time required for the surface area quantification of exemplary algae compared with established ImageJ analysis. Our results show that Photopea is equally accurate as ImageJ, but 45% more time efficient. This time efficiency originates from using colour contrast that reduces the time needed to analyse each picture. Photopea thus offers an accurate, rapid, and cost-free tool to easily obtain reference data from field and laboratory experiments. This tool is particularly useful for experiments with an extensive sample size of specimens and thus can increase the power of study results. Full article

Immunohistochemical quantification of inflammatory cells in skin biopsies is a valuable tool for diagnosing skin diseases and assessing treatment response. The quantification of individual cells in biopsies is time-consuming, tedious, and difficult. In this study, we presented and compared two methods for the quantification of CD8⁺ T cells in skin biopsies from patients with psoriasis using both commercial software (Adobe Photoshop) and open-source software (Qupath). In addition, we provided a detailed, step-by-step description of both methods. The methods are scalable by replacing the CD8 antibody with other antibodies to target different cells. Moreover, we investigated the correlation between quantifying CD8⁺ cells normalized to area or epidermal length and cell classifications, compared cell classifications in QuPath with threshold classifications in Photoshop, and analyzed the impact of data normalization to epidermal length or area on inflammatory cell densities in skin biopsies from patients with psoriasis. We found a satisfactory correlation between normalizing data to epidermal length and area for psoriasis skin. However, when non-lesional and lesional skin samples were compared, a significant underestimation of inflammatory cell density was found when data were normalized to area instead of epidermal length. Finally, Bland–Altman plots comparing Qupath and Photoshop to quantify inflammatory cell density demonstrated a good agreement between the two methods. Full article

This study aimed to investigate and compare the reliability and accuracy of tooth shade selection in the model using 30 milled crowns via five methods: (1) digital single-lens reflex (DSLR) camera with twin flash (TF) and polarized filter (DSLR + TF), (2) DSLR camera with a ring flash (RF) and polarized filter (DSLR + RF), (3) smartphone camera with light corrector and polarized filter (SMART), (4) intraoral scanner (IOS), and (5) spectrophotometer (SPEC). These methods were compared with the control group or manufacturer’s shade. The CIE Lab values (L, a, and b values) were obtained from five of the methods to indicate the color of the tooth. Adobe Photoshop was used to generate CIE Lab values from the digital photographs. The reliability was calculated from the intraclass correlation based on two repetitions. The accuracy was calculated from; (a) ΔE calculated by the formula comparing each method to the control group, (b) study and control groups were analyzed by using the Kruskal–Wallis test, and (c) the relationship between study and control groups were calculated using Spearman’s correlation. The reliability of the intraclass correlation of L, a, and b values obtained from the five methods showed satisfactory correlations ranging from 0.732–0.996, 0.887–0.994, and 0.884–0.999, respectively. The ΔE from all groups had statistically significant differences when compared to the border of clinical acceptance (ΔE = 6.8). The ΔE from DSLR + TF, DSLR + RF, SMART, and SPEC were higher than clinical acceptance (ΔE > 6.8), whereas the ΔE from IOS was 5.96 and all of the L, a, and b values were not statistically significantly different from the manufacturer’s shade (p < 0.01). The ΔE of the DSLR + RF group showed the least accuracy (ΔE = 19.98), whereas the ∆E of DSLR + TF, SMART, and SPEC showed similar accuracy ∆E (ΔE = 10.90, 10.57, and 11.57, respectively). The DSLR camera combined with a ring flash system and polarized filter provided the least accuracy. The intraoral scanner provided the highest accuracy. However, tooth shade selection deserves the combination of various techniques and a professional learning curve to establish the most accurate outcome. Full article