Search Results (649)

A facile and single-step synthesis of poly(L-Cysteine) (p(L-Cys)) particles through microemulsion polymerization using tetrakis(hydroxymethyl) phosphonium chloride (THPC) as crosslinker is accomplished for the first time. The L-Cys:THPC ratio in p(L-Cys) particles was calculated as 80:20% (by weight) with elemental analyses, and the generation of p(L-Cys) particles was confirmed. SEM imaging revealed a popcorn-like morphology of the p(L-Cys) particles with a 1–20 µm particle size range. The isoelectric point of p(L-Cys) particles was determined at pH 1.15 via zeta potential measurements. The hydrolytic degradation of p(L-Cys) particles was determined as about 85% within 3 h (by weight). The p(L-Cys) particles displayed excellent blood compatibility with a hemolysis % ratio of <2.3% and a blood clotting index of 95% at 1 mg/mL concentration. Moreover, cell compatibility tests up to 50 mg/mL against L929 fibroblast cells exhibited about 90% cell viability for p(L-Cys) particles versus 58% for L-Cys molecule. The antimicrobial efficacy of the L-Cys molecules was notably enhanced in p(L-Cys) particles, exhibiting a 5-fold reduction in minimal bactericidal concentration (MBC) values against E. coli (Gram-negative, ATCC 8739) and a 2-fold reduction against S. aureus (Gram-positive, ATCC 6538). Additionally, the antioxidant capacity of p(L-Cys) particles was retained somewhat, measured as 0.14 ± 0.01 µM versus 2.25 ± 0.03 µM Trolox equivalent/g for L-Cys. Therefore, p(L-Cys) particles are versatile and offer a unique avenue for immense biomedical use. Full article

Curcuminoids demonstrate diverse pharmacological activity as antioxidant, neuroprotective, antitumor, and anti-inflammatory drugs. Dimethoxycurcumin (DMC) is a metabolically stable analog of curcumin, and both drugs modify the activity of several epigenetic enzymes that affect DNA methylation and histone modifications. 5-hydroxymethylcytosine (5hmC) is an epigenetic mark involved in active demethylation and in gene expression regulation. The effect of curcuminoids on the activity and expression of TET enzymes involved in 5hmC oxidation and active demethylation in leukemia cells is unclear. In this study, we investigated the impact of curcumin and DMC on the activity and expression of the three isoforms of TET enzymes. We also studied their effect on global 5hmC and performed a genome-wide analysis of 5hmC distribution at the single CpG level using oxidative bisulfite sequencing, which can differentiate between 5hmC and 5-methylcytosine. Both curcumin and DMC increased the activity and the mRNA expression of the three isoforms of TET. Concordantly, they also increased the global 5hmC level in leukemia cells. Single CpG analysis showed that both drugs induced a 5hmC increase and active demethylation at gene promoters, CpG islands and shores, exons, introns, and intergenic regions. Curcumin induced a promoter 5hmC increase in 194 genes and promoter-active demethylation in 154 genes. On the other hand, DMC induced a promoter 5hmC increase in 173 genes and promoter-active demethylation in 171 genes. Our study identifies curcuminoids as active demethylators through the activation of TET enzymes and provides a rationale for testing their combination with DNA hypomethylating agents in leukemia animal models. Full article

This study investigates the performance of phenol–formaldehyde adhesives containing Eucalyptus lignin as an extender in their formulation. A commercial phenol–formaldehyde resin was used, and five different types of lignin were tested: (1) kraft lignin precipitated with carbon dioxide, (2) kraft lignin precipitated with sulfuric acid, (3) soda lignin precipitated with hydrochloric acid, (4) soda lignin precipitated with sulfuric acid, and (5) a second soda lignin where the wood underwent a phosphoric acid extraction process prior to alkaline extraction. The lignins were used both unmodified and activated through three different processes: hydroxymethylation, phenolysis in an acidic medium, and alkaline phenolysis. Adhesives were formulated with substitution percentages of the base resin ranging from 10% to 60%, in addition to a reference adhesive that contained no lignin. Wooden test specimens were manufactured to determine the tensile shear strength. Results indicate that best performance is achieved when lignins are activated through hydroxymethylation and when soda lignin is used. Under optimal conditions, it is possible to replace at least 45% of the base resin with activated Eucalyptus soda lignin, which represents a reduction of at least 30% in the cost of the final adhesive. This substitution results in a 46% increase in adhesive strength compared to the base adhesive (without lignin). These findings suggest that the valorization Eucalyptus soda lignin could have significant economic and environmental benefits. Full article

Flavor is a pivotal indicator influencing the meat quality and palatability of premium broiler chickens, shaped by multiple factors. The flavor differences among broiler chicken breeds/lines stem from the specificity of their metabolite profiles and volatile flavor compounds. This study aims to identify key metabolites and pathways that regulate flavor variations in high-quality broilers, providing data support and theoretical references for breeding superior broiler lines and developing technologies to enhance flavor quality. Breast Muscle tissue from 15-week-old roosters of the S3 and H lines (n = 6) was used as experimental material. Broad-targeted metabolomics and volatile metabolomics technologies were employed to identify key metabolites and volatile organic compounds (VOCs) influencing the flavor of breast meat in these two high-quality broiler lines. Broad-target metabolomics identified 167 differentially expressed metabolites (VIP > 1, p < 0.05) between the two strains, including 141 upregulated and 26 downregulated metabolites. These metabolites were primarily amino acids and their derivatives, and were significantly enriched in metabolic pathways such as ABC transporters (p < 0.05). Leu-Tyr, Ile-Tyr, Val-Leu, Val-Ile, and Tyr-Ala were identified as key metabolites influencing the flavor formation of breast meat from both high-quality broiler lines. Volatile metabolomics results identified 33 downregulated VOCs (VIP > 1 and p < 0.05). The flavor differences between the two strains primarily involved fatty and grassy flavor. Key flavor markers included 2-Nonanone, 2-Nonanone, 3-hydroxymethyl, 2-Methylheptanoic acid, and Hexanoic acid, butyl ester as the primary flavor markers. These significantly downregulated volatiles are formed through lipid oxidation and amino acid degradation pathways, respectively, collectively shaping the more pronounced fatty and grassy aromas in the S3 strain. Correlation analysis revealed a significant negative correlation between Met-Asn and Hexanoic acid, butyl ester, suggesting it may represent a key regulatory pathway influencing green flavor formation. In summary, this study elucidates key metabolites and pathways governing flavor differences in high-quality broiler rooster breast meat, providing a scientific foundation for poultry breeding, optimization of farming practices, and flavor regulation in meat products. Full article

We investigated the adsorption and aggregation properties of 2,13-bis(hydroxymethyl)-[7]thiaheterohelicene ([7]TH-diol) on the Ag(111) surface by scanning tunneling microscopy (STM) and molecular dynamics (MD) simulation. STM observation revealed that both racemic and enantiopure [7]TH-diol formed apparently similar “zigzag” chain structures. To elucidate the molecular arrangements in these structures, MD simulation successfully differentiates the formation mechanisms of these structures, demonstrating that hetero-chiral chains are stabilized primarily by van der Waals forces, whereas homo-chiral chains are stabilized through hydrogen bonding. The formation of homo-chiral chains is driven by the alignment of hydroxymethyl groups between the neighboring molecules, whereas the steric hindrance of helical skeletons affects chain growth. These findings highlight the critical role of inter-molecular interactions—particularly hydrogen bonding—in the self-assembly of helicene molecules. Full article

5-hydroxymethylfurfural (5-HMF) has been shown to exert neuroprotective effects in a global cerebral ischemia mouse model in our previous study, where it demonstrated antioxidant and anti-inflammatory properties. However, studies on its antidepressant mechanisms remain scarce. Since oxidative stress and neuroinflammation are closely associated with depression, this study investigated the antidepressant effects of 5-HMF, focusing on its potential inhibition of oxidative stress via the Nrf2 pathway and its role in microglial M1 polarization-mediated neuroinflammation. An acute depression mouse model induced by intraperitoneal injection of lipopolysaccharide (LPS) was utilized. Mice received 5-HMF (12 mg/kg) or an equal volume of vehicle via intraperitoneal injection 30 min prior to and 5 min after LPS administration. At 24 h post-modeling, behavioral tests (sucrose preference, forced swim, and open field tests) were conducted to evaluate the antidepressant effect of 5-HMF. Histological damage in the hypothalamus was assessed using Nissl staining and terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) staining. Immunofluorescence was performed to evaluate M1 polarization of hypothalamic microglia. Oxidative stress damage was assessed by measuring malondialdehyde (MDA), carbonyl groups, and 8-hydroxy-2′-deoxyguanosine (8-OHdG) levels. Nrf2 DNA-binding activity was examined using an ELISA-based assay. The expression of inflammatory cytokines, Nrf2, and downstream antioxidant proteins was analyzed by ELISA kits and Western blotting. 5-HMF significantly alleviated LPS-induced depression-like behaviors, reduced hypothalamic neuronal damage, decreased oxidative stress, and inhibited microglial M1 polarization. It also regulated the expression of inflammatory cytokines (IL-1β, IL-6, TNF-α, IL-4, and IL-10) and activated the Nrf2 signaling pathway, enhancing nuclear translocation efficiency. Notably, these effects were significantly attenuated by the Nrf2 inhibitor brusatol. In conclusion, 5-HMF exerts neuroprotective effects by modulating Nrf2-mediated oxidative stress responses and suppressing microglial M1 polarization-driven neuroinflammation. These findings suggest that 5-HMF may provide therapeutic potential for alleviating depression symptoms induced by acute inflammation. Full article

Background/Objectives: Heterofunctional cationic polyester dendrimers derived from a 2-(bromomethyl)-2-(hydroxymethyl)propane-1,3-diol (BHP-diol) based AB₂C monomer were evaluated as efficient and biodegradable nonviral carriers for siRNA delivery. Methods: These dendrimers feature dual internal and external charge architectures, enabling precise control of charge distribution and siRNA interaction strength. Results: They achieved complete siRNA complexation at nitrogen-to-phosphate (N/P) ratios of 0.50–2.14 and provided up to 93% RNase protection, outperforming amino-functional scaffolds based on 2,2-bis(methylol)propionic acid (bis-MPA). In human (T98G) and murine (GL261) glioblastoma cells, the dendrimers exhibited minimal cytotoxicity while achieving 52–61% target protein knockdown, a two- to three-fold improvement over conventional polyester dendrimers, and approaching the silencing efficiency of the commercial Interferin^® reagent. Conclusions: The combination of high complexation efficiency, strong nuclease resistance, and excellent biocompatibility establishes these heterofunctional dendrimers as a new generation of precisely tunable, biodegradable vectors for therapeutic siRNA delivery. Full article

Tetrakis (Hydroxymethyl) Phosphonium chloride (THPC) in aqueous solution reacts with amines to form aminomethylenephosphines. The reaction was studied with piperidine, and THPC was used with PEI. The reaction with PEI leads to new polymers with phosphine groups (PEI-P) and phosphine oxide (PEI-PO) after oxidation by hydrogen peroxide. These polymers coordinate cations of transition metals, lanthanides and actinides. Full article

Cyanothioacetamide readily reacts with aromatic aldehydes in an aqueous–alcoholic medium in the presence of triethylamine as a catalyst, resulting in arylmethylene cyanothioacetamides (3-aryl-2-cyanothioacrylamides). The latter react with formaldehyde (HCHO), yielding N-(hydroxymethyl) derivatives. This work proposes a method for the preparation of new derivatives of N-(hydroxyalkyl)thioacrylamides. The details of the synthesis and spectral data are discussed. Biological effects are also considered as 2,4-D herbicide antidotes (safeners). Full article

2-Oxazolines are five-membered heterocyclic compounds with significant biological properties. They also play an important role in organic synthesis, acting as chiral ligands and protecting groups for hydroxyamino acids and amino alcohols. Poly(2-oxazolines) are known coating materials, for example, in biomedicine. Classic synthetic methods of 2-oxazolines involve a dehydrative cyclisation reaction between amino alcohols and carboxylic acids, acid chlorides, nitriles, imidates, and aldehydes. However, the electrophilic intramolecular cyclization of unsaturated amides is becoming an increasingly important synthetic method for the preparation of 2-oxazolines. This brief review summarizes procedures for synthesizing oxazolines using the electrophilic intramolecular oxidative cyclisation of N-allyl and N-propargyl amides, as published between 2014 and 2024. It covers the synthesis of 5-halomethyl-, 5-trifluoromethyl-, 5-sulfonylmethyl-, 5-sulfenylmethyl-, 5-selenylmethyl-, 5-acetoxymethyl-, 5-hydroxymethyl-, 5-aminomethyl-, 5-alkilo-, and 5-alkylideneoxazolines. Full article

Traditional Fe-based materials are limited for Cr(VI) remediation due to low reactivity, oxidation, and aggregation. Although chitosan coatings improve stability, they hinder efficient liquid-solid separation. To overcome this, a novel phosphorus-modified magnetic chitosan adsorbent (PCC/Fe₃O₄) was synthesized using Fe₃O₄ as the core and tetrakis hydroxymethyl phosphonium sulfate (THPS) as a cross-linking agent. The composite exhibited a high surface area (20.67 m²/g) and superparamagnetism, enabling easy magnetic recovery. PCC/Fe₃O₄ demonstrated superior Cr(VI) removal capabilities compared to unmodified chitosan and raw Fe₃O₄, achieving a saturated adsorption capacity of 23.6 mg/g under the selected conditions (pH 6, initial Cr(VI) concentration of 1 mg/L), which were chosen to balance adsorption efficiency, adsorbent stability, and environmental relevance. The main removal mechanism includes electrostatic attraction, redox reaction, and ligand exchange. PCC/Fe₃O₄ maintained 86% efficiency after 5 d aging and >90% efficiency after five cycles, demonstrating excellent stability and reusability and strong potential for practical environmental remediation. Full article

Heavy metal ions in herbal medicine sometimes exceed the standard limit, inducing severe and harmful problems in human health. Exploring new nanomaterials to chelate heavy metal ions and reduce their concentration in herbal decoctions could be a solution route. In this study, the nanoadsorbent poly(2-(hydroxymethyl)acrylic acid (PHMAA) was prepared via free radical polymerization and the hydrolysis method. PHMAA showed excellent dispersion in aqueous solution and self-assembled into spherical aggregates with a negative surface charge. After freeze-drying, PHMAA was a white solid powder with a loose porous structure. PHMAA presented no significant influence on the cell viability and weight of normal BALB/c mice. PHMAA showed good removal efficiency towards Cd²⁺ ions in aqueous solution; the removal rate exceeded 80%. In herbal decoctions, PHMAA presented moderate to good removal capacity towards Cd²⁺ ions; the removal rate was 60%, 83%, and 89% for the Morindae officinalis radix decoction, Ligusticum wallichii decoction, and Coptidis rhizome decoction, separately. When the concentration of Cd²⁺ ions in the decoction was decreased to 5 μg/mL, PHMAA also presented good removal efficiency. During the removal process, PHMAA played no influence on the active ingredients. To conclude, PHMAA showed good biosafety and removal capacity towards Cd²⁺ ions, which might be utilized as nanoadsorbents to reduce the concentration of Cd²⁺ ions in aqueous solution and herbal decoctions. Full article

As an eco-friendly flame-retardant additive, magnesium hydroxide (MH) is widely employed in low-smoking, halogen-free polymer materials due to its environmentally benign nature. In order to enhance flame retardancy performance, the modified MH was modified with tetrakis(hydroxymethyl)phosphonium sulfate (THPS) by a one-pot hydrothermal method. The resulting morphology was characterized using scanning electron microscopy (SEM), and it shows the dispersion of nanometer particles and almost no aggregation. The X-ray photoelectron spectroscopy (XPS) along with Raman spectroscopy show that the THPS is connected with the Mg(OH)₂ by chemical bond. The sample was incorporated into ethylene–vinyl acetate (EVA) to evaluate the flame retardancy was assessed via limiting oxygen index (LOI) and vertical burning tests (UL-94). The results show that THPS modified MH effectively enhanced the flame retardancy, achieving a V-0 rating and an LOI value of 31.3%. In addition, the composites retain good mechanical integrity. The thermal analysis with TGA and DTG shows the formation of the MgO decomposition product, along with water vapor and phosphorus-containing radicals released by modified MH in the combustion process, forming a strong flame-retardant protective layer. In addition, the maximum smoke density of EVA/MHP-3 composite was 155.4, lower than 411.3 for EVA/MH, with a 62.2% reduction in total smoke production. The result shows that THPS is effective for improving the flame-retardant efficiency of inorganic metal hydroxide in polymer composites. Full article

Caffeic acid (CA), 3-O-caffeoylquinic acid (3-CQA), and 5-O-caffeoylquinic acid (5-CQA) were subjected to treating stimulated mouse P815 mast cells to unravel their antiallergic potential. β-Hexosaminidase release, appearance, morphology change, cytokine secretions, and degranulation-related pathway gene expressions, including Mas-related G protein-coupled receptor, member B2 (MRGP receptor B2), and inositol 1,4,5-triphosphate receptor 2 (IP3 receptor 2), in the stimulated mast cells were measured. An ELISA was used to determine the secreted cytokines. The relative gene expression folds were analyzed with reverse transcription real-time quantitative polymerase chain reaction. Correlations between gene expressions and different parameters were analyzed using the Pearson product–moment correlation coefficient (r). The results showed that CA had a superior effect than 3-CQA and 5-CQA on reducing β-hexosaminidase release, IL-4, and IL-6 cytokine secretions by the compound 48/80 (C48/80)- and 5-hydroxymethyl-2-furaldehyde (5-HMF)-stimulated mast cells. CA increased intact mast cell numbers but reduced granule releases, evidencing that CA may soothe activated mast cells. CA reduced IP3 receptor 2 gene expression. There were positive correlations between IP3 receptor 2 gene expression and IL-4 and IL-6 cytokine secretions. Our results conclude that CA might inhibit degranulation, IL-4 and IL-6 cytokine secretions, and IP3 receptor 2 gene expression in C48/80-stimulated mouse P815 mast cells. Full article

An investigation of the effect of intense Hot Water Extraction (HWE) on the chemical properties and processability of shredded hemp stalks (Cannabis sativa L.) is presented in this study. The chemical composition of untreated hemp was compared to that of hemp subjected to V and XV successive HWE cycles. This study investigated changes in selected chemical compounds, such as extractives, lignin, cellulose, ash, and monosaccharides such as glucose and xylose. Additionally, post-HWE liquids were analyzed. Lignin content was determined by the UV–VIS spectrophotometry method, whereas monosaccharides (glucose, xylose) and inhibitors (formic acid, acetic acid, levulinic acid, ethanol, 5-(hydroxymethyl)furfural, and furfural) were identified by HPLC. Extractives and ash were effectively removed by the HWE process, decreasing from 3.2 to 2.0% and from 3.9% to 2.7%, respectively. The reduction in acid-soluble lignin was an important finding, indicating a selective modification of the lignin matrix. By the end of V cycles, xylose content in the liquid phase significantly increased from 117.9% to 19.4%, indicating a reduction in hemicelluloses. The cellulose content of the solid material rose from 42.9% to 46.2% at the end of XV cycles. Full article