Search Results (1,234)

With the widespread diffusion of personal Internet of Things (IoT) devices, Electromagnetic Side-Channel Attacks (EM-SCAs), which exploit electromagnetic emissions to uncover critical data such as cryptographic keys, are becoming extremely common. Existing shielding approaches typically rely on bulky or opaque materials, which limit integration in modern IoT environments; this motivates the need for a transparent, lightweight, and easily integrable solution. Thus, to address this threat, we propose the use of electromagnetic metasurfaces with shielding capabilities, fabricated with an optically transparent conductive film. This film can be easily integrated into glass substrates, offering a novel and discrete shielding solution to traditional methods, which are typically based on opaque dielectric media. The paper presents two proof-of-concept case studies for shielding against EM-SCAs. The first one investigates the design and fabrication of a passive metasurface aimed at shielding emissions from chip processors in IoT devices. The metasurface is conceived to attenuate a specific frequency range, characteristic of the considered IoT processor, with a target attenuation of 30 dB. At the same time, the metasurface ensures that signals from 4G and 5G services are not affected, thus preserving normal wireless communication functioning. Conversely, the second case study introduces an active metasurface for dynamic shielding/transmission behavior, which can be modulated through diodes according to user requirements. This active metasurface is designed to block undesired electromagnetic emissions within the 150–465 MHz frequency range, which is a common band for screen gleaning security threats. The experimental results demonstrate an attenuation of approximately 10 dB across the frequency band when the shielding mode is activated, indicating a substantial reduction in signal transmission. Both the case studies highlight the potential of transparent metasurfaces for secure and dynamic electromagnetic shielding, suggesting their discrete integration in building windows or other environmental structural elements. Full article

A compact quad-band multiple-input multiple-output (MIMO) antenna for terahertz communications is presented in this work. The proposed antenna consists of a truncated square patch with inverted-U-shaped and C-shaped slots. The operating frequencies of the proposed antenna are 0.38 THz, 0.43 THz, 0.61 THz, and 0.7 THz, with reflection coefficients of −13.8 dB, −22.1 dB, −27.3 dB, and −14.8 dB, respectively, and a −10 dB impedance bandwidth of 9 GHz, 18 GHz, 18 GHz, and 21 GHz, respectively. The peak gain values of a single element antenna at 0.38 THz, 0.43 THz, 0.61 THz, and 0.7 THz are 3.3 dB, 4.8 dB, 4.7 dB, and 5.5 dB, respectively. The dual-triangular MIMO configuration was investigated. The peak gains of the MIMO configurations at 0.38 THz, 0.43 THz, 0.61 THz, and 0.7 THz are 10.6 dB, 12.2 dB, 15.6 dB, and 15.2 dB, respectively. The envelope correlation coefficient (ECC) and the diversity gain (DG) of the proposed antenna were investigated and are presented herein. The proposed MIMO antenna demonstrates lower coupling and higher isolation at the operating frequency bands. Therefore, it is a suitable candidate for beyond 5G and 6G wireless communications applications, such as for nanodevices used in the internet of things and in wearables. Full article

In line with the trend of “native intelligence”, artificial intelligence (AI) will be more deeply integrated into communication networks in the future. Quality of AI service (QoAIS) will become an important factor in measuring the performance of native AI wireless networks. Networks should reasonably allocate multi-dimensional resources to ensure QoAIS for users. Extended Reality (XR) is one of the important application scenarios for future 6G networks. To ensure both the accuracy and latency requirements of users for AI services are met, this paper proposes a resource allocation algorithm called Asynchronous Multi-Agent Deep Deterministic Policy Gradient with Independent State and Action (A-MADDPG-ISA). The proposed algorithm supports agents to use different dimensional state spaces and action spaces; therefore, it enables agents to address different strategy issues separately and makes the algorithm design more flexible. The actions of different agents are executed asynchronously, enabling actions outputted earlier to be transmitted as additional information to other agents. The simulation results show that the proposed algorithm has a 10.41% improvement compared to MADDPG (Multi-Agent Deep Deterministic Policy Gradient). Furthermore, to overcome the limitations of directly applying AI or manual rule-based schemes to real networks, this research establishes a digital twin network (DTN) system and designs pre-validation functionality. The DTN system contributes to better ensuring users’ QoAIS. Full article

Multi-hop relaying can solve the problems of limited single-hop wireless communication distance, poor signal quality, or the inability to communicate directly by “relaying” data transmission through multiple intermediate nodes. It serves as the cornerstone for building large-scale, highly reliable, and self-adapting wireless networks, especially for the Internet of Things (IoT) and future 6G. This paper focuses on a decode-and-forward (DF) multi-hop relay network that employs simultaneous wireless information and power transfer (SWIPT) technology, with relays operating in a passive state. We first investigate the optimization of the power splitting (PS) ratio at each relay, given the source node transmit power, to maximize end-to-end network throughput. Subsequently, we jointly optimized the PS ratios and the source transmit power to minimize the source transmit power while satisfying the system’s minimum quality of service (QoS) requirement. Although both problems are non-convex, they can be reformulated as convex optimization problems. Closed-form optimal solutions are then derived based on the Karush–Kuhn–Tucker (KKT) conditions and a recursive method, respectively. Moreover, we find that the closed-form optimal solutions for the PS ratios corresponding to the two problems are identical. Through simulations, we validate that the performance of the two proposed schemes based on the closed-form solutions is optimal, while also demonstrating their extremely fast algorithm execution speeds, thereby proving the deployment value of the two proposed schemes in practical communication scenarios. Full article

The rapid evolution of wireless communication toward Fifth Generation (5G) networks has enabled unprecedented performance improvement in terms of data rate, latency, reliability, sustainability, and connectivity. Recent years have witnessed an excessive deployment of new 5G networks worldwide. This deployment lead to an exponential growth in traffic flow and a massive number of connected devices requiring a new generation of energy-hungry base stations (BSs). This results in increased power consumption, higher operational costs, and greater environmental impact, making energy efficiency (EE) a critical research challenge. This paper presents a comprehensive survey of EE optimization strategies in 5G networks. It reviews the transition from traditional methods such as resources allocation, energy harvesting, BS sleep modes, and power control to modern artificial intelligence (AI)-driven solutions employing machine learning, deep reinforcement learning, and self-organizing networks (SON). Comparative analyses highlight the trade-offs between energy savings, network performance, and implementation complexity. Finally, the paper outlines key open issues and future directions toward sustainable 5G and beyond-5G (B5G/Sixth Generation (6G)) systems, emphasizing explainable AI, zero-energy communications, and holistic green network design. Full article

With the development of 6G technology, conventional wireless communication systems are increasingly unable to meet stringent performance requirements in complex and dynamic environments. Therefore, integrated sensing and communication (ISAC), which enables efficient spectrum sharing, has attracted growing attention as a promising solution. This paper provides a comprehensive survey of reconfigurable intelligent surface (RIS)-unmanned aerial vehicle (UAV)-assisted ISAC systems. It first introduces a four-dimensional quantitative evaluation framework grounded in information theory. Then, we provide a structured overview of coordination mechanisms between different types of RIS and UAV platforms within ISAC architectures. Furthermore, we analyze the application characteristics of various multiple access schemes in these systems. Finally, the main technical challenges and potential future research directions are discussed and analyzed. Full article

This work presents the fabrication and characterization of a bow-tie antenna integrated uni-traveling carrier photodiode (UTC-PD) on a silicon carbide (SiC) substrate for efficient terahertz (THz) wave generation. The proposed device exploits the superior thermal conductivity and mechanical robustness of SiC to overcome the self-heating limitations associated with conventional indium phosphide (InP)-based photodiodes. An epitaxial layer transfer technique was utilized to bond InP/InGaAs UTC-PD structures onto SiC. The study systematically examines the influence of critical geometric parameters, specifically the mesa diameter and length between the antenna arms, on the emitted THz intensity in the 300 GHz frequency band. Experimental results show that the THz radiation efficiency is primarily governed by the mesa diameter, reflecting the trade-off between light absorption, device capacitance, and bandwidth, while the length between the antenna arms exhibits only a weak influence within the investigated parameter range. The fabricated device demonstrates strong linearity between photocurrent and THz output power up to 7.5 mA, after which saturation occurs due to space-charge effects. This work provides crucial insights for optimizing SiC-based bow-tie antenna integrated UTC-PD devices to realize robust, high-power THz sources vital for future high-data-rate wireless communication systems such as beyond 5G and 6G networks. Full article

The advent of sixth-generation (6G) imposes stringent demands on wireless networks, while traditional 2D rigid reconfigurable intelligent surfaces (RISs) face bottlenecks in regulatory freedom and scenario adaptability. To address this, stacked intelligent metasurfaces (SIMs) have emerged. This paper presents a systematic review of SIM technology. It first elaborates on the SIM multi-layer stacked architecture and wave-domain signal-processing principles, which overcome the spatial constraints of conventional RISs. Then, it analyzes challenges, including beamforming and channel estimation for SIM, and explores its application prospects in key 6G scenarios such as integrated sensing and communication (ISAC), low earth orbit (LEO) satellite communication, semantic communication, and UAV communication, as well as future trends like integration with machine learning and nonlinear devices. Finally, it summarizes the open challenges in low-complexity design, modeling and optimization, and performance evaluation, aiming to provide insights to promote the large-scale adoption of SIM in next-generation wireless communications. Full article

The advancement of Automotive Industry 4.0 has promoted the development of Vehicle to Vehicle (V2V) and Internet of Vehicles (IoV) communication, which marks the new era for intelligent, connected and automated transportation. Despite the benefits of this metamorphosis in terms of effectiveness and convenience, new obstacles to safety, inter-connectivity, and cybersecurity emerge. The tire pressure monitoring system (TPMS) is one prominent feature that senses tire pressure, which is closely related to vehicle stability, braking performance and fuel efficiency. However, the majority of TPMSs currently in use are based on the use of insecure and proprietary wireless communication links that can be breached by attackers so as to interfere with not only tire pressure readings but also sensor data manipulation. For this purpose, we design a secure TPMS architecture suitable for real-time IoV sensing. The framework is experimentally implemented using a Raspberry Pi 3B+ (Raspberry Pi Ltd., Cambridge, UK) as an independent autonomous control unit (ACU), interfaced with vehicular pressure sensors and a LoRa SX1278 (Semtech Corporation, Camarillo, CA, USA) module to support low-power, long-range communication. The gathered sensor data are encrypted, their integrity checked, source authenticated by lightweight cryptographic algorithms and sent to a secure server locally. To validate this approach, we show a three-node exhibition where Node A (raw data and tampered copy), B (unprotected copy) and C (secure auditor equipped with alerting of tampering and weekly rotation of the ID) realize detection of physical level threats at top speeds. The validated datasets are further enriched in a MATLAB R2024a simulator by replicating the data of one vehicle by 100 virtual vehicles communicating using over 5G, LoRaWAN and LoRa P2P as communication protocols under urban, rural and hill-station scenarios. The presented statistics show that, despite 5G ultra-low latency, LoRa P2P consistently provides better reliability and energy efficiency and is more resistant to attacks in the presence of various terrains. Considering the lack of private vehicular 5G infrastructure and the regulatory restrictions, this work simulated and evaluated the performance of 5G communication, while LoRa-based communication was experimentally validated with a hardware prototype. The results underline the trade-offs among LoRa P2P and an infrastructure-based uplink 5G mode, when under some specific simulation conditions, as opposed to claiming superiority over all 5G modes. In conclusion, the presented Raspberry Pi–MATLAB hybrid solution proves to be an effective and scalable approach to secure TPMS in IoV settings, intersecting real-world sensing with large-scale network simulation, thus enabling safer and smarter next-generation vehicular systems. Full article

Unmanned aerial vehicles (UAVs) are playing increasingly important roles in military operations, disaster relief, agriculture, and communications. However, their performance is limited by energy management problems, especially in hybrid systems such as those combining fuel cells with a lithium battery. The potential of deep learning to significantly improve UAV power management is investigated in this work through adaptive forecasting and real-time optimization. We develop smart algorithms that automatically balance energy efficiency and communication performance for heterogeneous wireless networks. The simulation results demonstrate energy consumption savings, optimized flight altitudes, and spectral efficiency improvements compared to Fixed Weight and Fuzzy Logic Weight schemes. At saturated user densities, the model enables up to 42% lower energy consumption and 54% higher throughput. Moreover, predictive models based on recurrent and transformer-based deep networks allow UAVs to predict energy requirements over a variety of mission and environmental contexts, shifting from reactive approaches to proactive control. The adoption of these methods in UAV-aided beyond-5G (B5G) and future 6G network scenarios can potentially prolong endurance times and enhance mission connectivity and reliability in challenging environments. This work lays the foundation for an all-aspect framework to control and manage UAV energy in the 5G era, which takes advantage of not only deep learning but also edge computing and hybrid power systems. Deep learning is confirmed to be a keystone of sustainable, autonomous, and energy-aware UAVs operation for next-generation networks. Full article

Following the persistent evolution of terrestrial 5G wireless systems, a new field of underwater communication has emerged for various related applications like environmental monitoring, underwater mining, and marine research. However, establishing reliable high-speed underwater networks remains notoriously difficult due to the severe RF attenuation in conductive seawater, which strictly limits range coverage. In this article, we focus on a comprehensive review of different antenna types for future underwater communication and sensing systems, evaluating their performance and suitability for Autonomous Underwater Vehicles (AUVs). We critically examine and compare distinct antenna technologies, including Magnetic Induction (MI) coils, electrically short dipoles, wideband traveling wave antennas, printed planar antennas, and novel magnetoelectric (ME) resonators. Specifically, these antennas are compared in terms of physical footprint, operating frequency, bandwidth, and realized gain, revealing the trade-offs between miniaturization and radiation efficiency. Our analysis aims to identify the benefits and weaknesses of the different antenna types while emphasizing the necessity of innovative antenna designs to overcome the fundamental propagation limits of the underwater channel. Full article

Semantic communication systems leverage deep neural networks to extract and transmit essential information, achieving superior performance in bandwidth-constrained wireless environments. However, their vulnerability to backdoor attacks poses critical security threats, where adversaries can inject malicious triggers during training to manipulate system behavior. This paper introduces Selective Communication Unlearning (SCU), a novel defense mechanism based on Variational Information Bottleneck (VIB) principles. SCU employs a two-stage approach: (1) joint unlearning to remove backdoor knowledge from both encoder and decoder while preserving legitimate data representations, and (2) contrastive compensation to maximize feature separation between poisoned and clean samples. Extensive experiments on the RML2016.10a wireless signal dataset demonstrate that SCU achieves 629.5 ± 191.2% backdoor mitigation (5-seed average; 95% CI: [364.1%, 895.0%]), with peak performance of 1486% under optimal conditions, while maintaining only 11.5% clean performance degradation. This represents an order-of-magnitude improvement over detection-based defenses and fundamentally outperforms existing unlearning approaches that achieve near-zero or negative mitigation. We validate SCU across seven signal processing domains, four adaptive backdoor types, and varying SNR conditions, demonstrating unprecedented robustness and generalizability. The framework achieves a 243 s unlearning time, making it practical for resource-constrained edge deployments in 6G networks. Full article

Visible Light Communication (VLC) systems commonly employ optical orthogonal frequency division multiplexing (O-OFDM) to achieve high data rates, benefiting from its robustness against multipath effects and intersymbol interference (ISI). However, a key limitation of asymmetrically clipped direct current biased optical–OFDM (ACO-OFDM) systems lies in their inherently high peak-to-average power ratio (PAPR), which significantly affects signal quality and system performance. This paper proposes a joint chaotic encryption and modified μ-non-linear logarithmic companding (μ-MLCT) scheme for ACO-OFDM–based VLC systems to simultaneously enhance security and reduce PAPR. First, image data is encrypted at the upper layer using a hybrid chaotic system (HCS) combined with Arnold’s cat map (ACM), mapped to quadrature amplitude modulation (QAM) symbols and further encrypted through chaos-based symbol scrambling to strengthen security. A μ-MLCT transformation is then applied to mitigate PAPR and enhance both peak signal-to-noise ratio (PSNR) and bit-error-ratio (BER) performance. A mathematical model of the proposed secured ACO-OFDM system is developed, and the corresponding BER expression is derived and validated through simulation. Simulation results and security analyses confirm the effectiveness of the proposed solution, showing gains of approximately 13 dB improvement in PSNR, 2 dB in BER performance, and a PAPR reduction of about 9.2 dB. The secured μ-MLCT-ACO-OFDM not only enhances transmission security but also effectively reduces PAPR without degrading PSNR and BER. As a result, it offers a robust and efficient solution for secure image transmission with low PAPR, making it well-suitable for emerging wireless networks such as cognitive and 5G/6G systems. Full article

Autonomous vehicles (AVs) are transforming transportation by improving safety, efficiency, and intelligence through integrated sensing, computing, and communication technologies. However, their growing reliance on Vehicle-to-Everything (V2X) communication exposes them to cybersecurity vulnerabilities, particularly at the physical layer. Among these, jamming attacks represent a critical threat by disrupting wireless channels and compromising message delivery, severely impacting vehicle coordination and safety. This work investigates the robustness of New Radio (NR)-V2X-enabled vehicular systems under jamming conditions through a dual-methodology approach. First, two Cooperative Intelligent Transport System (C-ITS) scenarios standardized by 3GPP—Do Not Pass Warning (DNPW) and Intersection Movement Assist (IMA)—are implemented in the OMNeT++ simulation environment using Simu5G, Veins, and SUMO. The simulations incorporate four types of jamming strategies and evaluate their impact on key metrics such as packet loss, signal quality, inter-vehicle spacing, and collision risk. Second, a complementary laboratory experiment is conducted using AnaPico vector signal generators (a Keysight Technologies brand) and an Anritsu multi-channel spectrum receiver, replicating controlled wireless conditions to validate the degradation effects observed in the simulation. The findings reveal that jamming severely undermines communication reliability in NR-V2X systems, both in simulation and in practice. These findings highlight the urgent need for resilient NR-V2X protocols and countermeasures to ensure the integrity of cooperative autonomous systems in adversarial environments. Full article

Advanced two-dimensional (2D) beam steering is essential for unlocking the full potential of terahertz (THz) systems in future 6G communications and high-resolution imaging. However, achieving wide-angle, high-speed, and high-precision 2D beam control within a compact THz platform remains a significant challenge. In this work, we experimentally demonstrate an optoelectronic $2\times 2$ THz antenna array that enables flexible 2D beam steering, beam hopping, and beam scanning around the 300 GHz band. This work employs a $2\times 2$ microstrip patch antenna (MPA) array directly driven by InGaAs/InP UTC-PDs on a silicon carbide (SiC) substrate. The relative phases of the four radiating elements are precisely programmed using an optical phased array (OPA), which provides fully decoupled and low-latency phase control in the optical domain. Experimentally, we demonstrate 2D beam steering and 2D beam hopping among three representative directions at a polar angle of ${25}^{\circ }$ and azimuth angles of ${60}^{\circ }$, ${180}^{\circ }$, and ${300}^{\circ }$. Furthermore, continuous 2D beam scanning at a fixed polar angle of ${25}^{\circ }$ is achieved, enabling a full ${360}^{\circ }$ azimuth sweep within 0.43 s while maintaining high beam quality. These results confirm that the proposed UTC-PD based $2\times 2$ MPA array provides a practical and robust approach for 2D THz beam manipulation, and offers strong potential for future 6G wireless links and THz imaging applications. Full article