Sign in to use this feature.

Years

Between: -

Article Types

Countries / Regions

Search Results (13)

Search Parameters:
Journal = Micromachines
Section = C1: Micro/Nanoscale Electrokinetics

Order results
Result details
Results per page
Select all
Export citation of selected articles as:
11 pages, 2041 KiB  
Article
Surface Porousization of Hard Carbon Anode Materials for Sodium-Ion Batteries
by Qianhui Huang, Shunzhang You and Chenghao Yang
Micromachines 2025, 16(7), 771; https://doi.org/10.3390/mi16070771 - 30 Jun 2025
Viewed by 512
Abstract
Sodium-ion batteries (SIBs) have been considered as a promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the commercial graphite anode is not suitable for SIBs due to its low Na+ ion storage capability. Currently, hard carbon has been considered [...] Read more.
Sodium-ion batteries (SIBs) have been considered as a promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the commercial graphite anode is not suitable for SIBs due to its low Na+ ion storage capability. Currently, hard carbon has been considered a promising anode material for SIBs. Herein, the surface porousized hard carbon anode materials have been prepared by using hydrogen peroxide (H2O2) with a hydrothermal method (HC-HO) and utilized as the anode material for SIBs. The porous structure of HC-HO provides more storage space for Na+ ions and enhances the intercalation/deintercalation reversibility and diffusion rate of Na+ ions. Moreover, HC-HO can effectively alleviate the particle volume expansion and generate a thin and stable SEI film during charge/discharge processes. Thus, the HC-HO exhibits a high reversible capacity (314.4 mAh g−1 with an ICE of 92.3% at 0.05 C), excellent rate performance (241.4 mAh g−1 at 3 C), and outstanding cycling stability (a capacity retention of 78.6% after 500 cycles at 1 C). The preparation of porous hard carbon provides new ideas for the future development direction of hard carbon. Full article
(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

18 pages, 908 KiB  
Article
Diffusiophoresis of a Weakly Charged Dielectric Fluid Droplet in a Cylindrical Pore
by Lily Chuang, Sunny Chen, Nemo Chang, Jean Chien, Venesa Liao and Eric Lee
Micromachines 2025, 16(6), 707; https://doi.org/10.3390/mi16060707 - 13 Jun 2025
Viewed by 515
Abstract
Diffusiophoresis of a weakly charged dielectric droplet in a cylindrical pore is investigated theoretically in this study. The governing fundamental electrokinetic equations are solved with a patched pseudo-spectral method based on Chebyshev polynomials, coupled with a geometric mapping scheme to take care of [...] Read more.
Diffusiophoresis of a weakly charged dielectric droplet in a cylindrical pore is investigated theoretically in this study. The governing fundamental electrokinetic equations are solved with a patched pseudo-spectral method based on Chebyshev polynomials, coupled with a geometric mapping scheme to take care of the irregular solution domain. The impact of the boundary confinement effect upon the droplet motion is explored in detail, which is most profound in narrow channels. We found, among other things, that the droplet moving direction may reverse with varying channel widths. Enhanced motion-inducing double-layer polarization due to the presence of a nearby channel wall is found to be responsible for it. In particular, an interesting and seemingly peculiar phenomenon referred to as the “solidification phenomenon” is observed here at some specific critical droplet sizes or electrolyte strengths in narrow channels, under which all the droplets move at identical speeds regardless of their viscosities. They move like a rigid particle without the surface spinning motions and the induced interior recirculating vortex flows. As the corresponding shear rate is zero at this point, the droplet is resilient to undesirable exterior shear stresses tending to damage the droplet in motion. This provides a helpful guideline in the fabrication of liposomes in drug delivery in terms of the optimal liposome size, as well as in the microfluidic and nanofluidic manipulations of cells, among other potential practical applications. The effects of other parameters of electrokinetic interest are also examined. Full article
Show Figures

Figure 1

21 pages, 38577 KiB  
Article
A Novel Variable Volume Capillary Microgripper for Micromanipulation in Aqueous Media
by Enrique Mancha-Sánchez, Andrés J. Serrano-Balbontín, Inés Tejado and Blas M. Vinagre
Micromachines 2025, 16(6), 633; https://doi.org/10.3390/mi16060633 - 27 May 2025
Viewed by 374
Abstract
This study presents a novel capillary microgripper for manipulating micrometer-sized objects directly within aqueous environments. The system features dynamic, vision-based feedback control of a non-volatile silicone oil droplet volume, enabling precise adjustment of the capillary bridge force for the adaptable capture of varying [...] Read more.
This study presents a novel capillary microgripper for manipulating micrometer-sized objects directly within aqueous environments. The system features dynamic, vision-based feedback control of a non-volatile silicone oil droplet volume, enabling precise adjustment of the capillary bridge force for the adaptable capture of varying object sizes. This approach ensures extended working time and stable operation in water, mitigating the issues associated with evaporation common in other systems. COMSOL Multiphysics simulations analyzed capillary bridge formation. Experimental validation demonstrated successful different object shapes and sizes capture in an aqueous environment and further explored active release strategies necessary due to the non-volatile fluid, confirming the system potential for robust underwater micromanipulation. Full article
(This article belongs to the Special Issue Complex Fluid Flows in Microfluidics)
Show Figures

Figure 1

21 pages, 5078 KiB  
Article
Experimental and Numerical Study of Slug-Flow Velocity Inside Microchannels Through In Situ Optical Monitoring
by Samuele Moscato, Emanuela Cutuli, Massimo Camarda and Maide Bucolo
Micromachines 2025, 16(5), 586; https://doi.org/10.3390/mi16050586 - 17 May 2025
Cited by 1 | Viewed by 434
Abstract
Miniaturization and reliable, real-time, non-invasive monitoring are essential for investigating microfluidic processes in Lab-on-a-Chip (LoC) systems. Progress in this field is driven by three complementary approaches: analytical modeling, computational fluid dynamics (CFD) simulations, and experimental validation techniques. In this study, we present an [...] Read more.
Miniaturization and reliable, real-time, non-invasive monitoring are essential for investigating microfluidic processes in Lab-on-a-Chip (LoC) systems. Progress in this field is driven by three complementary approaches: analytical modeling, computational fluid dynamics (CFD) simulations, and experimental validation techniques. In this study, we present an on-chip experimental method for estimating the slug-flow velocity in microchannels through in situ optical monitoring. Slug flow involving two immiscible fluids was investigated under both liquid–liquid and gas–liquid conditions via an extensive experimental campaign. The measured velocities were used to determine the slug length and key dimensionless parameters, including the Reynolds number and Capillary number. A comparison with analytical models and CFD simulations revealed significant discrepancies, particularly in gas–liquid flows. These differences are mainly attributed to factors such as gas compressibility, pressure fluctuations, the presence of a liquid film, and leakage flows, all of which substantially affect flow dynamics. Notably, the percentage error in liquid–liquid flows was lower than that in gas–liquid flows, largely due to the incompressibility assumption inherent in the model. The high-frequency monitoring capability of the proposed method enables in situ mapping of evolving multiphase structures, offering valuable insights into slug-flow dynamics and transient phenomena that are often difficult to capture using conventional measurement techniques. Full article
(This article belongs to the Special Issue Complex Fluid Flows in Microfluidics)
Show Figures

Figure 1

35 pages, 3239 KiB  
Review
A Review on AC-Dielectrophoresis of Nanoparticles
by Tonoy K. Mondal, Aaditya V. B. Bangaru and Stuart J. Williams
Micromachines 2025, 16(4), 453; https://doi.org/10.3390/mi16040453 - 11 Apr 2025
Viewed by 3302
Abstract
Dielectrophoresis at the nanoscale has gained significant attention in recent years as a low-cost, rapid, efficient, and label-free technique. This method holds great promise for various interdisciplinary applications related to micro- and nanoscience, including biosensors, microfluidics, and nanomachines. The innovation and development of [...] Read more.
Dielectrophoresis at the nanoscale has gained significant attention in recent years as a low-cost, rapid, efficient, and label-free technique. This method holds great promise for various interdisciplinary applications related to micro- and nanoscience, including biosensors, microfluidics, and nanomachines. The innovation and development of such devices and platforms could promote wider applications in the field of nanotechnology. This review aims to provide an overview of recent developments and applications of nanoparticle dielectrophoresis, where at least one dimension of the geometry or the particles being manipulated is equal to or less than 100 nm. By offering a theoretical foundation to understand the processes and challenges that occur at the nanoscale—such as the need for high field gradients—this article presents a comprehensive overview of the advancements and applications of nanoparticle dielectrophoresis platforms over the past 15 years. This period has been characterized by significant progress, as well as persistent challenges in the manipulation and separation of nanoscale objects. As a foundation for future research, this review will help researchers explore new avenues and potential applications across various fields. Full article
(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

14 pages, 1307 KiB  
Article
Transient Gel Diffusiophoresis of a Spherical Colloidal Particle
by Hiroyuki Ohshima
Micromachines 2025, 16(3), 266; https://doi.org/10.3390/mi16030266 - 26 Feb 2025
Viewed by 669
Abstract
A general theory is presented to analyze the time-dependent, transient diffusiophoresis of a charged spherical colloidal particle in an uncharged gel medium containing a symmetrical electrolyte when an electrolyte concentration gradient is suddenly applied. We derive the inverse Laplace transform of an approximate [...] Read more.
A general theory is presented to analyze the time-dependent, transient diffusiophoresis of a charged spherical colloidal particle in an uncharged gel medium containing a symmetrical electrolyte when an electrolyte concentration gradient is suddenly applied. We derive the inverse Laplace transform of an approximate expression for the relaxation function R(t), which describes the time-course of the ratio of the diffusiophoretic mobility of a weakly charged spherical colloidal particle, possessing a thin electrical double layer, to its steady-state diffusiophoretic mobility. The relaxation function depends on the mass density ratio of the particle to the electrolyte solution, the particle radius, the Brinkman screening length, and the kinematic viscosity. However, it does not depend on the type of electrolyte (e.g., KCl or NaCl), which affects only the steady-state gel diffusiophoretic mobility. It is also found that the expression for the relaxation function in transient gel diffusiophoresis of a weakly charged spherical colloidal particle with a thin electrical double layer takes the same form as that for its transient gel electrophoresis. Full article
Show Figures

Figure 1

19 pages, 2387 KiB  
Review
Electro-Elastic Instability and Turbulence in Electro-osmotic Flows of Viscoelastic Fluids: Current Status and Future Directions
by Chandi Sasmal
Micromachines 2025, 16(2), 187; https://doi.org/10.3390/mi16020187 - 4 Feb 2025
Cited by 2 | Viewed by 1031
Abstract
The addition of even minute amounts of solid polymers, measured in parts per million (ppm), into a simple Newtonian fluid like water significantly alters the flow behavior of the resulting polymer solutions due to the introduction of fluid viscoelasticity. This viscoelastic behavior, which [...] Read more.
The addition of even minute amounts of solid polymers, measured in parts per million (ppm), into a simple Newtonian fluid like water significantly alters the flow behavior of the resulting polymer solutions due to the introduction of fluid viscoelasticity. This viscoelastic behavior, which arises due to the stretching and relaxation phenomena of polymer molecules, leads to complex flow dynamics that are starkly different from those seen in simple Newtonian fluids under the same conditions. In addition to polymer solutions, many other fluids, routinely used in various industries and our daily lives, exhibit viscoelastic properties, including emulsions; foams; suspensions; biological fluids such as blood, saliva, and cerebrospinal fluid; and suspensions of biomolecules like DNA and proteins. In various microfluidic platforms, these viscoelastic fluids are often transported using electro-osmotic flows (EOFs), where an electric field is applied to control fluid movement. This method provides more precise and accurate flow control compared to pressure-driven techniques. However, several experimental and numerical studies have shown that when either the applied electric field strength or the fluid elasticity exceeds a critical threshold, the flow in these viscoelastic fluids becomes unstable and asymmetric due to the development of electro-elastic instability (EEI). These instabilities are driven by the normal elastic stresses in viscoelastic fluids and are not observed in Newtonian fluids under the same conditions, where the flow remains steady and symmetric. As the electric field strength or fluid elasticity is further increased, these instabilities can transition into a more chaotic and turbulent-like flow state, referred to as electro-elastic turbulence (EET). This article comprehensively reviews the existing literature on these EEI and EET phenomena, summarizing key findings from both experimental and numerical studies. Additionally, this article presents a detailed discussion of future research directions, emphasizing the need for further investigations to fully understand and harness the potential of EEI and EET in various practical applications, particularly in microscale flow systems where better flow control and increased transport rates are essential. Full article
(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

10 pages, 3639 KiB  
Article
On-Chip DNA Assembly via Dielectrophoresis
by Xichuan Rui, Lin-Sheng Wu and Xin Zhao
Micromachines 2025, 16(1), 76; https://doi.org/10.3390/mi16010076 - 11 Jan 2025
Viewed by 1056
Abstract
On-chip gene synthesis has the potential to improve the synthesis throughput and reduce the cost exponentially. While there exist several microarray-based oligo synthesis technologies, on-chip gene assembly has yet to be demonstrated. This work introduces a novel on-chip DNA assembly method via dielectrophoresis [...] Read more.
On-chip gene synthesis has the potential to improve the synthesis throughput and reduce the cost exponentially. While there exist several microarray-based oligo synthesis technologies, on-chip gene assembly has yet to be demonstrated. This work introduces a novel on-chip DNA assembly method via dielectrophoresis (DEP) that can potentially be integrated with microarray-based oligo synthesis on the same chip. Our DEP chip can selectively manipulate oligos and guide their movement without perturbing the surrounding fluid medium, thus aiding in DNA assembly. Helical forked electrode design has been optimized for compatibility with DEP, ensuring efficient control over target oligos. By applying an alternating current signal set at 2 MHz, we successfully achieve the desired directed movement of oligonucleotides. Additionally, chemical treatments combined with photoirradiation enabled the connection of complementary gene sequences and the subsequent release of single-stranded DNA products. Sequencing results validate the effective assembly of DNA fragments, approximately 500 base pairs in length, using our DEP device. Full article
(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

20 pages, 3757 KiB  
Article
Analytical Solutions for Electroosmotic Flow and Heat Transfer Characteristics of Nanofluids in Circular Cylindrical Microchannels with Slip-Dependent Zeta Potential Considering Thermal Radiative Effects
by Zouqing Tan and Xiangcheng Ren
Micromachines 2025, 16(1), 63; https://doi.org/10.3390/mi16010063 - 5 Jan 2025
Viewed by 1323
Abstract
This study analyzes the impact of slip-dependent zeta potential on the heat transfer characteristics of nanofluids in cylindrical microchannels with consideration of thermal radiation effects. An analytical model is developed, accounting for the coupling between surface potential and interfacial slip. The linearized Poisson–Boltzmann [...] Read more.
This study analyzes the impact of slip-dependent zeta potential on the heat transfer characteristics of nanofluids in cylindrical microchannels with consideration of thermal radiation effects. An analytical model is developed, accounting for the coupling between surface potential and interfacial slip. The linearized Poisson–Boltzmann equation, along with the momentum and energy conservation equations, is solved analytically to obtain the electrical potential field, velocity field, temperature distribution, and Nusselt number for both slip-dependent (SD) and slip-independent (SI) zeta potentials. Subsequently, the effects of key parameters, including electric double-layer (EDL) thickness, slip length, nanoparticle volume fraction, thermal radiation parameters, and Brinkman number, on the velocity field, temperature field, and Nusselt number are discussed. The results show that the velocity is consistently higher for the SD zeta potential compared to the SI zeta potential. Meanwhile, the temperature for the SD case is higher than that for the SI case at lower Brinkman numbers, particularly for a thinner EDL. However, an inverse trend is observed at higher Brinkman numbers. Similar trends are observed for the Nusselt number under both SD and SI zeta potential conditions at different Brinkman numbers. Furthermore, for a thinner EDL, the differences in flow velocity, temperature, and Nusselt number between the SD and SI conditions are more pronounced. Full article
(This article belongs to the Section C1: Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

4 pages, 191 KiB  
Editorial
Editorial for the Micro/Nanoscale Electrokinetics Section
by Xiangchun Xuan
Micromachines 2024, 15(12), 1414; https://doi.org/10.3390/mi15121414 - 25 Nov 2024
Viewed by 881
Abstract
Electrokinetics is the study of fluid flow and particle motion driven by electricity [...] Full article
(This article belongs to the Section C1: Micro/Nanoscale Electrokinetics)
10 pages, 1280 KiB  
Article
Flowing Liquid Crystal Torons Around Obstacles
by Júlio P. A. Santos, Mahmoud Sedahmed, Rodrigo C. V. Coelho and Margarida M. Telo da Gama
Micromachines 2024, 15(11), 1302; https://doi.org/10.3390/mi15111302 - 26 Oct 2024
Cited by 3 | Viewed by 1284
Abstract
Liquid crystal torons, localized topological structures, are known for their stability and dynamic behaviour in response to external stimuli, making them attractive for advanced material applications. In this study, we investigate the flow of torons in chiral nematic liquid crystals around obstacles. We [...] Read more.
Liquid crystal torons, localized topological structures, are known for their stability and dynamic behaviour in response to external stimuli, making them attractive for advanced material applications. In this study, we investigate the flow of torons in chiral nematic liquid crystals around obstacles. We simulate the fluid flow and director field interactions using a hybrid numerical method combining lattice Boltzmann and finite difference techniques. Our results reveal that the toron dynamical behaviour depends strongly on the impact parameter from the obstacle. At impact parameters smaller than half cholesteric pitch, the flowing toron is destabilized by the interaction with the obstacle; otherwise, the flowing toron follows a trajectory with a deflection which decays exponentially with the impact parameter. Additionally, we explore the scattering of torons by multiple obstacles, providing insights into how the dynamics of these structures respond to complex environments. Full article
(This article belongs to the Special Issue Complex Fluid Flows in Microfluidics)
Show Figures

Figure 1

35 pages, 15586 KiB  
Review
Constrained Volume Micro- and Nanoparticle Collection Methods in Microfluidic Systems
by Tanner N. Wells, Holger Schmidt and Aaron R. Hawkins
Micromachines 2024, 15(6), 699; https://doi.org/10.3390/mi15060699 - 25 May 2024
Cited by 1 | Viewed by 1807
Abstract
Particle trapping and enrichment into confined volumes can be useful in particle processing and analysis. This review is an evaluation of the methods used to trap and enrich particles into constrained volumes in microfluidic and nanofluidic systems. These methods include physical, optical, electrical, [...] Read more.
Particle trapping and enrichment into confined volumes can be useful in particle processing and analysis. This review is an evaluation of the methods used to trap and enrich particles into constrained volumes in microfluidic and nanofluidic systems. These methods include physical, optical, electrical, magnetic, acoustic, and some hybrid techniques, all capable of locally enhancing nano- and microparticle concentrations on a microscale. Some key qualitative and quantitative comparison points are also explored, illustrating the specific applicability and challenges of each method. A few applications of these types of particle trapping are also discussed, including enhancing biological and chemical sensors, particle washing techniques, and fluid medium exchange systems. Full article
(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

16 pages, 2767 KiB  
Article
Optimizing Optical Dielectrophoretic (ODEP) Performance: Position- and Size-Dependent Droplet Manipulation in an Open-Chamber Oil Medium
by Md Aminul Islam and Sung-Yong Park
Micromachines 2024, 15(1), 119; https://doi.org/10.3390/mi15010119 - 11 Jan 2024
Cited by 1 | Viewed by 2359
Abstract
An optimization study is presented to enhance optical dielectrophoretic (ODEP) performance for effective manipulation of an oil-immersed droplet in the floating electrode optoelectronic tweezers (FEOET) device. This study focuses on understanding how the droplet’s position and size, relative to light illumination, affect the [...] Read more.
An optimization study is presented to enhance optical dielectrophoretic (ODEP) performance for effective manipulation of an oil-immersed droplet in the floating electrode optoelectronic tweezers (FEOET) device. This study focuses on understanding how the droplet’s position and size, relative to light illumination, affect the maximum ODEP force. Numerical simulations identified the characteristic length (Lc) of the electric field as a pivotal factor, representing the location of peak field strength. Utilizing 3D finite element simulations, the ODEP force is calculated through the Maxwell stress tensor by integrating the electric field strength over the droplet’s surface and then analyzed as a function of the droplet’s position and size normalized to Lc. Our findings reveal that the optimal position is xopt= Lc+ r, (with r being the droplet radius), while the optimal droplet size is ropt = 5Lc, maximizing light-induced field perturbation around the droplet. Experimental validations involving the tracking of droplet dynamics corroborated these findings. Especially, a droplet sized at r = 5Lc demonstrated the greatest optical actuation by performing the longest travel distance of 13.5 mm with its highest moving speed of 6.15 mm/s, when it was initially positioned at x0= Lc+ r = 6Lc from the light’s center. These results align well with our simulations, confirming the criticality of both the position (xopt) and size (ropt) for maximizing ODEP force. This study not only provides a deeper understanding of the position- and size-dependent parameters for effective droplet manipulation in FEOET systems, but also advances the development of low-cost, disposable, lab-on-a-chip (LOC) devices for multiplexed biological and biochemical analyses. Full article
(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
Show Figures

Figure 1

Back to TopTop