Search Results (28)

Camellia oleifera Abel (C. oleifera) is an evergreen shrub classified under the Camellia genus. It is an important oil species and has great economic benefits. At present, C. oleifera is widely cultivated in the Yangtze River Basin in South China, and its wild species are mainly distributed in the native forests of Hainan Province. Therefore, in the current study, we used the MaxEnt model to predict the suitable habitat for C. oleifera and different environmental factors affecting its current and future distribution. The AUC values exceeded 0.98, showing that the simulation of the model was good, and the TSS values were all above 0.96, indicating that the model was feasible. The results showed that C. oleifera was mainly distributed in Southern China, with a total area of 56.68 × 10⁴ km². The suitable habitats of Camellia oleifera are affected by the precipitation of the warmest quarter (bio18), human activity, soil available water content (awc_class), and minimum temperature of the coldest month and seasonal temperature (bio04). Furthermore, rainfall in the warmest quarter (bio18) was recognized as a crucial factor impacting its distribution. Under future climate conditions, the suitable habitat area of C. oleifera is projected to expand with a slight northward shift in its distribution center. Therefore, in addition to maintaining the current planting area of C. oleifera, the planting area can be appropriately expanded upward along the current area and along the Yangtze River Basin. Full article

Rosa hybrida is one the most commonly cultivated ornamental plant of economic importance and faces major challenges under heat stress. Melatonin has been widely shown to regulate plant stress response; however, the exact mechanism involved in heat stress in R. hybrida has yet to be determined. Here, we observed that R. hybrida in vitro plantlets supplemented with melatonin in the culture medium exhibited higher chlorophyll content, relative ion leakage, and fresh weight after 12 d of high-temperature treatment; the optimal concentration was established at 5 mg/L. Using molecular and biochemical techniques, we explored the roles of a melatonin synthase gene RhCOMT1, which expression was influenced by heat stress and melatonin. RhCOMT1 was located in the nuclear-cytoplasmic under ambient conditions, while heat stress translocated the distribution of RhCOMT1 to chloroplasts. Overexpression of RhCOMT1 in rose petal enhanced thermotolerance, and silencing of RhCOMT1 reduced thermotolerance via affect H₂O₂ content and relative ion leakage. These findings collectively emphasize the pivotal role of melatonin in enhancing thermotolerance to R. hybrida by alleviation of oxidative stress, through modulation of RhCOMT1 expression and location. Full article

The photo-thermochemical cycle (PTC) for water splitting offers a sustainable method for hydrogen production by efficiently utilizing solar energy. This study explored the use of CeO₂ as a catalyst in the PTC system to enhance hydrogen yield. A nanostructured CeO₂ catalyst was synthesized via the sol-gel method, achieving an H₂ yield of 8.35 μmol g⁻¹ h⁻¹. Stability tests over five cycles showed consistent yields between 7.22 and 8.35 μmol g⁻¹ h⁻¹. Analysis revealed that oxygen vacancies (V_Os) increased after the photoreaction and depleted during the thermal reaction, which aligns with the expected PTC mechanism for hydrogen production. Single-factor experiments highlighted that photoreaction duration mainly influenced V_Os generation, while thermal duration and temperature impacted V_Os consumption and intermediate reaction rates. A response surface methodology (RSM) model predicted optimal conditions for maximum H₂ yield (8.85 μmol g⁻¹ h⁻¹) with a photoreaction duration of 46.6 min, thermal duration of 45.4 min, and thermal temperature of 547.2 °C. Full article

Trichoderma is a widely studied ascomycete fungal genus, including more than 400 species. However, genetic information on Trichoderma is limited, with most species reporting only DNA barcodes. Mitochondria possess their own distinct DNA that plays a pivotal role in molecular function and evolution. Here, we report 42 novel mitochondrial genomes (mitogenomes) combined with 18 published mitogenomes of Trichoderma. These circular mitogenomes exhibit sizes of 26,276–94,608 bp, typically comprising 15 core protein-coding genes (PCGs), 2 rRNAs, and 16–30 tRNAs; however, the number of endonucleases and hypothetical proteins encoded in the introns of PCGs increases with genome size enlargement. According to the result of phylogenetic analysis of the whole mitogenome, these strains diverged into six distinct evolutionary branches, supported by the phylogeny based on 2830 single-copy nuclear genes. Comparative analysis revealed that dynamic Trichoderma mitogenomes exhibited variations in genome size, gene number, GC content, tRNA copy, and intron across different branches. We identified three mutation hotspots near the regions encoding nad3, cox2, and nad5 that caused major changes in the mitogenomes. Evolutionary analysis revealed that atp9, cob, nad4L, nad5, and rps3 have been influenced by positive selection during evolution. This study provides a valuable resource for exploring the important roles of the genetic and evolutionary dynamics of Trichoderma mitogenome in the adaptive evolution of biocontrol fungi. Full article

Chinese cabbage (Brassica rapa L. ssp. pekinensis) is an important food crop. However, its growth and development are commonly impacted by black spot disease. To examine the response mechanisms of Chinese cabbage to black spot disease, transcriptome and metabolome sequencing were performed on the leaves of Chinese cabbage genotypes J405 (resistant) and B214 (susceptible), 48 h post-infection (hpi) with Alternaria brassicicola. Expression of essential genes in the jasmonic acid, cytokinin, and auxin signaling pathways of both Chinese cabbage genotypes was inhibited. The expression of the pathogenesis-related protein 1 (PR1) gene mediated by the salicylic acid pathway is inhibited in the Chinese cabbage genotype B214. The basic endochitase B (CHIB) gene in the ethylene pathway of both Chinese cabbage genotypes was upregulated. The accumulation of reactive oxygen species in the disease spots of Chinese cabbage genotype J405 was greater than in genotype B214. The respiratory burst oxidase (RBOH) gene in the reactive oxygen species metabolic pathway was significantly upregulated in genotype J405, while no change was observed in genotype B214. We found that oxidation-reduction-related genes such as type-2 peroxiredoxin genes, NADPH-dependent thioredoxin reductase genes, glutathione peroxidase genes, and glutathione S-transfer genes were differentially expressed across both Chinese cabbage genotypes at 48 hpi. Metabolomics demonstrated that delta-tocopherol and S-hexyl glutathione were all downregulated in genotype J405, while they were upregulated in genotype B214. This approach also identified differential expression of genes in the carotenoid biosynthesis pathway, the glycinebetaine biosynthesis pathway, as well as in the specific sulfur glycoside metabolism pathway. These findings indicate that ethylene signaling is important in the hormone signaling regulatory network-mediated disease resistance and defense in Chinese cabbage. When facing pathogen infection, hormone transduction pathways associated with growth and development in Chinese cabbage are inhibited. The accumulation of reactive oxygen species and the outbreak of various secondary metabolites may endow the Chinese cabbage genotype J405 with increased resistance to black spot disease. Full article

Pithiness is one of the physiological diseases of radishes, which is accompanied by the accumulation of reactive oxygen species (ROS) during the sponging of parenchyma tissue in the fleshy roots. A respiratory burst oxidase homolog (Rboh, also known as NADPH oxidase) is a key enzyme that catalyzes the production of ROS in plants. To understand the role of Rboh genes in radish pithiness, herein, 10 RsRboh gene families were identified in the genome of Raphanus sativus using Blastp and Hmmer searching methods and were subjected to basic functional analyses such as phylogenetic tree construction, chromosomal localization, conserved structural domain analysis, and promoter element prediction. The expression profiles of RsRbohs in five stages (Pithiness grade = 0, 1, 2, 3, 4, respectively) of radish pithiness were analyzed. The results showed that 10 RsRbohs expressed different levels during the development of radish pithiness. Except for RsRbohB and RsRbohE, the expression of other members increased and reached the peak at the P2 (Pithiness grade = 2) stage, among which RsRbohD1 showed the highest transcripts. Then, the expression of 40 genes related to RsRbohD1 and pithiness were analyzed. These results can provide a theoretical basis for improving pithiness tolerance in radishes. Full article

The EPIDERMAL PATTERNING FACTOR (EPF) plays a crucial role in plant response to abiotic stress. While the EPF has been extensively studied in model plants such as Arabidopsis thaliana, there is a lack of research on identifying EPF genes in the whole sorghum genome and its response to drought stress. In this study, we employed bioinformatics tools to identify 12 EPF members in sorghum. Phylogenetic tree analysis revealed that SbEPFs can be categorized into four branches. Further examination of the gene structure and protein conservation motifs of EPF family members demonstrated the high conservation of the SbEPF sequence. The promoter region of SbEPFs was found to encompass cis-elements responsive to stress and plant hormones. Moreover, real-time fluorescence quantitative results indicated that the SbEPFs have a tissue-specific expression. Under drought stress treatment, most SbEPF members were significantly up-regulated, indicating their potential role in drought response. Our research findings establish a foundation for investigating the function of SbEPFs and offer candidate genes for stress-resistant breeding and enhanced production in sorghum. Full article

Heat shock transcription factors (HSFs) play a crucial role in regulating plant growth and response to various abiotic stresses. In this study, we conducted a comprehensive analysis of the AeHSF gene family at genome-wide level in kiwifruit (Actinidia eriantha), focusing on their functions in the response to abiotic stresses. A total of 41 AeHSF genes were identified and categorized into three primary groups, namely, HSFA, HSFB, and HSFC. Further transcriptome analysis revealed that the expression of AeHSFA2b/2c and AeHSFB1c/1d/2c/3b was strongly induced by salt, which was confirmed by qRT-PCR assays. The overexpression of AeHSFA2b in Arabidopsis significantly improved the tolerance to salt stress by increasing AtRS5, AtGolS1 and AtGolS2 expression. Furthermore, yeast one-hybrid, dual-luciferase, and electrophoretic mobility shift assays demonstrated that AeHSFA2b could bind to the AeRFS4 promoter directly. Therefore, we speculated that AeHSFA2b may activate AeRFS4 expression by directly binding its promoter to enhance the kiwifruit’s tolerance to salt stress. These results will provide a new insight into the evolutionary and functional mechanisms of AeHSF genes in kiwifruit. Full article

Background: Students are a priority population in mental health research. This study aimed to explore the risk factors of anxiety and depression symptoms among college students in Chongqing, a megacity under the impact of COVID-19, and to provide a basis for determining the priorities of public health policies and implementing effective educational health care interventions. Methods: In this cross-sectional study conducted in Chongqing, China, the data came from web-based stratified random sampling. Anxiety and depression symptoms were measured by the Self-Rating Anxiety Scale (SAS) and the Center for Epidemiological Studies Depression Scale (CES-D), respectively, and risk factors were analyzed by logistic regression. Results: Data were obtained from 915 college students (34.75% were male, and 65.25% were female) with age (20.29 ± 1.51) in Chongqing, China. The prevalence rates of anxiety and depression were 19.78% and 22.62%, respectively. Logistic regression analysis revealed that the risk factors of anxiety symptoms were associated with junior years, sleep time of less than 6 h a day, influence on career planning, and depression symptoms. Comprehensive, science and engineering, and medicine disciplines, having siblings, poorer mastery of study, and anxiety symptoms were risk factors for developing depression symptoms. Conclusions: During the pandemic, college students experienced varying degrees of anxiety and depression. Our research findings highlight the necessity of universities and relevant departments providing precise mental health education for college students under major public health emergencies. Full article

Deltamethrin (DM), a Type II pyrethroid, is widely used worldwide in agriculture, household applications, and medicine. Recent studies have shown that DM exerts a variety of toxic effects on organs such as the kidney, heart muscle, and nerves in animals. However, little is known about the effects of high-dose DM on growth and development, and the mechanism of toxicity remains unclear. Using the Caenorhabditis elegans model, we found that high-dose DM caused a delay in nematode development. Our results showed that high-dose DM reduced the activation of the endoplasmic reticulum unfolded protein response (UPR^ER). Further studies revealed that high-dose DM-induced developmental toxicity and reduced capacity for UPR^ER activation were associated with the IRE-1/XBP-1 pathway. Our results provide new evidence for the developmental toxicity of DM and new insights into the mechanism of DM toxicity. Full article

Ultrafast electron diffraction (UED) is a powerful tool for observing the evolution of transient structures at the atomic level. However, temporal resolution is a huge challenge for UEDs, mainly depending on the pulse duration. Unfortunately, the Coulomb force between electrons causes the pulse duration to increase continually when propagating, reducing the temporal resolution. In this paper, we theoretically design a radio frequency (RF) compression cavity using the finite-element method of electromagnetic–thermal coupling to overcome this limitation and obtain a high-brightness, short-pulse-duration, and stable electron beam. In addition, the cavity’s size parameters are optimized, and a water-cooling system is designed to ensure stable operation. To the best of our knowledge, this is the first time that the electromagnetic–thermal coupling method has been used to study the RF cavity applied to UED. The results show that the RF cavity operates in TM010 mode with a resonant frequency of 2970 MHz and generates a resonant electric field. This mode of operation generates an electric field that varies periodically and transiently, compressing the electronic pulse duration. The electromagnetic–thermal coupling method proposed in this study effectively improves the temporal resolution of UED. Full article

This paper explores the implementation and application of non-uniform ambient fields from two perspectives: constant heat source and abrupt heat source variation. On the one hand, the proper orthogonal decomposition (POD) method is used to find the optimum air supply parameters for different target temperatures at multiple demand points. The one-parameter, two-parameter and three-parameter cases were considered, respectively, and the parameters obtained from the search for optimisation were verified, yielding mean deviations of 0.405 K, 0.368 K and 0.380 K and mean errors of 1.48%, 1.61% and 1.68%, respectively. The accuracy of the reconstructed results of the POD method and the reliability of the POD method for finding the best results are verified step by step with the help of the experimental platform. The validation results show that the average error between the reconstructed data and the experimental data for the POD method does not exceed 5%; the average errors between the measured and set demand temperatures at the target point are 1.2% and 0.8%. On the other hand, the gappy POD method is used to accurately fill in the elements of the system with arbitrary missing data and to reconstruct the flow field in the presence of missing (gappy) data with a limited number of sensors combined with POD. The errors of the gappy POD method reconstruction are 0.54% and 1.75%. POD and gappy POD methods can better create non-uniform temperature fields in practical scenarios according to actual needs. The results of the study can provide a methodological reference for real-time reconstruction and real-time control of the indoor flow field environment. It also serves as a help and suggestion for the actual project in terms of end-regulation system and reverse design method. Full article

Polyimide (PI) membrane is an ideal gas separation material due to its advantages of high designability, good mechanical properties and easy processing; however, it has equilibrium limitations in gas selectivity and permeability. Introducing nanoparticles into polymers is an effective method to improve the gas separation performance. In this work, nano-attapulgite (ATP) functionalized with KH-550 silane coupling agent was used to prepare polyimide/ATP composite membranes by in-situ polymerization. A series of characterization and performance tests were carried out on the membranes. The obtained results suggested a significant increase in gas permeability upon increasing the ATP content. When the content of ATP was 50%, the gas permeability of H₂, He, N₂, O₂, CH₄, and CO₂ reached 11.82, 12.44, 0.13, 0.84, 0.10, and 4.64 barrer, which were 126.87%, 119.40%, 160.00%, 140.00%, 150.00% and 152.17% higher than that of pure polyimide, respectively. No significant change in gas selectivity was observed. The gas permeabilities of membranes at different pressures were also investigated. The inefficient polymer chain stacking and the additional void volume at the interface between the polymer and TiO₂ clusters leaded to the increase of the free volume, thus improving the permeability of the polyimide membrane. As a promising separation material, the PI/ATP composite membrane can be widely used in gas separation industry. Full article

The effects of nanoparticles (NPs) on microbiota homeostasis and their physiological relevance are still unclear. Herein, we compared the modulation and consequent pharmacological effects of oral administration of (−)-epigallocatechin-3-gallate (EGCG)-loaded β-cyclodextrin (β-CD) NPs (EGCG@β-CD NPs) and EGCG on gut microbiota. EGCG@β-CD NPs were prepared using self-assembly and their influence on the intestinal microbiome structure was analyzed using a metagenomics approach. The “Encapsulation efficiency (EE), particle size, polydispersity index (PDI), zeta potential” of EGCG@β-CD NPs were recorded as 98.27 ± 0.36%, 124.6 nm, 0.313 and –24.3 mV, respectively. Surface morphology of EGCG@β-CD NPs was observed as spherical. Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and molecular docking studies confirmed that EGCG could be well encapsulated in β-CD and formed as EGCG@β-CD NPs. After being continuously administered EGCG@β-CD NPs for 8 weeks, the serum cholesterol (TC), low-density lipoprotein cholesterol (LDL-C) and liver malondialdehyde (MDA) levels in the rats were significantly decreased, while the levels of catalase (CAT) and apolipoprotein-A1 (apo-A1) in the liver increased significantly in the hyperlipidemia model of rats, when compared to the high-fat-diet group. Furthermore, metagenomic analysis revealed that the ratio of Verrucomicrobia/Bacteroidetes was altered and Bacteroidetes decreased in the high-fat diet +200 mg/kg·bw EGCG@β-CD NPs group, while the abundance of Verrucomicrobia was significantly increased, especially Akkermansia muciniphila in rat feces. EGCG@β-CD NPs could be a promising EGCG delivery strategy to modulate the gut microbiota, enhancing its employment in the prevention of hyperlipidemia. Full article

Ultrafast detection is an effective method to reveal the transient evolution mechanism of materials. Compared with ultra-fast X-ray diffraction (XRD), the ultra-fast electron beam is increasingly adopted because the larger scattering cross-section is less harmful to the sample. The keV single-shot ultra-fast electron imaging system has been widely used with its compact structure and easy integration. To achieve both the single pulse imaging and the ultra-high temporal resolution, magnetic lenses are typically used for transverse focus to increase signal strength, while radio frequency (RF) cavities are generally utilized for longitudinal compression to improve temporal resolution. However, the detection signal is relatively weak due to the Coulomb force between electrons. Moreover, the effect of RF compression on the transverse focus is usually ignored. We established a particle tracking model to simulate the electron pulse propagation based on the 1-D fluid equation and the 2-D mean-field equation. Under considering the relativity effect and Coulomb force, the impact of RF compression on the transverse focus was studied by solving the fifth-order Rung–Kutta equation. The results show that the RF cavity is not only a key component of longitudinal compression but also affects the transverse focusing. While the effect of transverse focus on longitudinal duration is negligible. By adjusting the position and compression strength of the RF cavity, the beam spot radius can be reduced from 100 $\mathsf{\mu }$m to 30 $\mathsf{\mu }$m under the simulation conditions in this paper. When the number of single pulse electrons remains constant, the electrons density incident on the sample could be increased from $3.18\times {10}^{12}$ ${\mathrm{m}}^{-2}$ to $3.54\times {10}^{13}$ ${\mathrm{m}}^{-2}$, which is 11 times the original. The larger the electron density incident on the sample, the greater the signal intensity, which is more conducive to detecting the transient evolution of the material. Full article