Search Results (11)

The ubiquitous presence of mutagenic and potentially carcinogenic N-nitrosamine impurities in medicines has become a major issue in the pharmaceutical industry in recent years. Rigorous mitigation strategies to limit their amount in drug products are, therefore, needed. The removal of nitrite, which is a prerequisite reagent for the N-nitrosation of amines, has been acknowledged as one of the most promising strategies. We have conducted an extensive literature search to identify nineteen structurally diverse nitrite scavengers and screened their activity experimentally under pharmaceutically relevant conditions. In the screening phase, we have identified six compounds that proved to have the best nitrite scavenging properties: ascorbic acid (vitamin C), sodium ascorbate, maltol, propyl gallate, para-aminobenzoic acid (PABA), and l-cysteine. These were selected for investigation as inhibitors of the formation of N-methyl-N-nitrosoaniline (NMA) from N-methylaniline and N-nitroso-N’-phenylpiperazine (NPP) from N-phenylpiperazine in both solution and model tablets. Much faster kinetics of NMA formation compared to NPP was observed, but the former was less stable at high temperatures. Vitamin C, PABA, and l-cysteine were recognized as the most effective inhibitors under most studied conditions. The nitrite scavenging activity does not directly translate into N-nitrosation inhibitory effectiveness, indicating other reaction pathways may take place. The study presents an important contribution to identifying physiologically acceptable chemicals that could be added to drugs to prevent N-nitrosation during manufacture and storage. Full article

Glasdegib is a recently approved drug for the treatment of acute myeloid leukemia. It is formulated and marketed in monomaleate salt form. In our investigation, we were able to prepare a glasdegib dimaleate form, which could, in theory, exist in double-salt form or as a mixture of salt and co-crystal species. Therefore, the obtained crystals of glasdegib dimaleate were characterized via ¹⁵N ssNMR and single-crystal X-ray diffraction, which revealed that the obtained glasdegib dimaleate exists in double-salt form. This is a surprising finding based on the pK_a values for glasdegib and maleic acid. Furthermore, we fully characterized the new dimaleate form using thermal analyses (DSC and TGA) and spectroscopy (IR and Raman). Finally, the physicochemical properties, such as solubility and chemical stability, of both forms were determined and compared. Full article

Venetoclax is an orally bioavailable, B-cell lymphoma-2 selective inhibitor used for the treatment of chronic lymphocytic leukemia, small lymphocytic lymphoma, and acute myeloid leukemia. Venetoclax’s crystal structure was until now determined only when it was bound to a B-cell lymphoma-2 (BCL-2) protein, while the crystal structure of this active pharmaceutical ingredient alone has not been reported yet. Herein, we present the first successful crystallization, which provided crystals of venetoclax suitable for X-ray diffraction analysis. The crystal structure of venetoclax hydrate was successfully determined. The asymmetric unit is composed of two crystallographically independent molecules of venetoclax and two molecules of interstitial water. Intramolecular N–H⋯O hydrogen bonding is present in both molecules, and a molecular overlay shows differences in their molecular conformations, which is also observed in respect to venetoclax molecules from known crystal structures of BCL-2:venetoclax complexes. A supramolecular structure is achieved through various N–H⋯N, O–H⋯O, C–H⋯O, C–H⋯π, C–Cl⋯π, ONO⋯π, and π⋯π interactions. The obtained crystals were additionally characterized with spectroscopic techniques, such as IR and Raman, as well as with thermal analysis. Full article

Venetoclax is an orally bioavailable, B-cell lymphoma-2 (BCL-2) selective inhibitor, used for the treatment of various types of blood cancers, such as chronic lymphocytic leukemia (CLL) and small lymphocytic lymphoma (SLL). In this study we investigated the degradation of venetoclax under various stress conditions including acidic, basic, oxidative, photolytic and thermolytic conditions. We isolated and identified six of its main degradation products produced in forced degradation studies. The structures of the isolated degradation products were determined by using nuclear magnetic resonance (NMR) spectroscopy, high resolution mass spectrometry (HRMS) and infrared (IR) spectroscopy. Additionally, one oxidation degradation product was identified with comparison to a commercially obtained venetoclax impurity. We proposed the key degradation pathways of venetoclax in solution. To the best of our knowledge, no structures of degradation products of venetoclax have been previously published. The study provides novel and primary knowledge of the stability characteristics of venetoclax under stress conditions. Venetoclax is currently the only BCL-2 protein inhibitor on the market. In addition to single agent treatment, it is effective in combinational therapy, so future drug development involving venetoclax can be expected. A better insight into the stability properties of the therapeutic can facilitate future studies involving venetoclax and aid in the search of new similar therapeutics. Full article

This article presents the development of a reversed-phase ultra-high-performance liquid chromatographic method for determining process-related impurities in ropinirole hydrochloride drug substance applying the analytical quality by design approach. The current pharmacopeial method suffers from selectivity issues due to two coelutions of two pairs of impurities. The development of a new method began with preliminary experiments, based on which the Acquity UPLC BEH C8 was selected as the most appropriate column. The effects of six different critical method parameters (CMPs) were then investigated using a fractional factorial screening design. Column temperature, the ratio of methanol in mobile phase B, and gradient slope turned out to be highly significant CMPs in achieving critical resolutions, and they were further evaluated using a central composite face-centered response-surface design. Mathematical models were created by applying a multiple linear regression method. Based on the elution order of an unknown degradation impurity and impurity C, two design spaces were established, and for each design space an optimal combination of CMPs was determined. The method developed was validated for precision, accuracy, linearity, and sensitivity, and it was proven suitable for determining nine process-related impurities of ropinirole. Full article

Tenofovir alafenamide fumarate (TAF) is the newest prodrug of tenofovir that constitutes several drug products used for the treatment of HIV/AIDS. Although the solid-state properties of its predecessor tenofovir disoproxil fumarate have been investigated and described in the literature, there are no data in the scientific literature on the solid state properties of TAF. In our report, we describe the preparation of two novel polymorphs II and III of tenofovir alafenamide monofumarate (TA MF2 and TA MF3). The solid-state structure of these compounds was investigated in parallel to the previously known tenofovir alafenamide monofumarate form I (TA MF1) and tenofovir alafenamide hemifumarate (TA HF). Interestingly, the single-crystal X-ray diffraction of TA HF revealed that this derivative exists as a co-crystal form. In addition, we prepared a crystalline tenofovir alafenamide free base (TA) and its hydrochloride salt (TA HCl), which enabled us to determine the structure of TA MF derivatives using ¹⁵N-ssNMR (¹⁵N-solid state nuclear magnetic resonance). Surprisingly, we observed that TA MF1 exists as a mixed ionization state complex or pure salt, while TA MF2 and TA MF3 can be obtained as pure co-crystal forms. Full article

d-cycloserine is a broad-spectrum antibiotic that is currently being used as a secondary choice in the treatment of tuberculosis. In recent years, it has become more popular, due to its effect on the nervous system. In this current study, we provide evidence that The International Pharmacopoeia HPLC–UV method for d-cycloserine impurity profiling is not repeatable due to the variable response of cycloserine dimer, one of d-cycloserine impurities. Therefore, we introduced the DOSY (diffusion ordered spectroscopy) NMR (nuclear magnetic resonance) technique to determine the levels of d-cycloserine impurities in pharmaceutical dosage forms. The DOSY NMR technique allowed separation of d-cycloserine, its degradation products, and key process impurities in concentrations below pharmacopoeial specification limits. The proposed DOSY NMR method allowed accurate identification and quantification of the cycloserine dimer, which was not possible through the use of the pharmacopoeial HPLC method. The current method has the potential for practical use in analytical laboratories of the pharmaceutical industry. Full article

This article presents the development of a reversed-phase (RP) high-performance liquid chromatographic (HPLC) method for determination of process-related impurities in a celecoxib drug substance following Analytical Quality by Design (AQbD) principles. The method from European Pharmacopeia (EP) for celecoxib drug substance does not sufficiently separate celecoxib from its EP impurity B because the system suitability criterion is not achieved (resolution NLT 1.8). The same issue was observed with the proposed method from United States Pharmacopeia (USP) for celecoxib capsules, where EP impurity A elutes under the main peak. A new HPLC method was developed that eliminates the disadvantages of the two pharmacopeial methods and is capable of efficiently separating and determining all seven impurities listed in EP and the proposed USP monographs. The development of a new HPLC method started with method scouting, in which various C18 and phenyl stationary phases were tested. Improved selectivity was obtained only with a chiral stationary phase. An immobilized Chiralpak IA-3 column used in RP mode turned out to be the most appropriate for method optimization. The ratio of acetonitrile in the mobile phase, flow rate, and column temperature were recognized as critical method parameters (CMPs) and were further investigated using a central composite face response-surface design. A multiple linear regression (MLR) method was applied to fit the mathematical models on the experimental data to determine factor–response relationships. The models created show adequate fit and good prediction abilities. The Monte Carlo simulation method was used to establish the design space. The method developed was verified in terms of precision, sensitivity, accuracy, and linearity, and the results showed that the new method is suitable for determination of seven process-related impurities of celecoxib. Full article

Reactive impurities originating from excipients can cause drug stability issues, even at trace amounts. When produced during final dosage form storage, they are especially hard to control, and often, factors inducing their formation remain unidentified. Oxidative degradation dependent formation of formaldehyde and formic acid is responsible for N-methylation and N-formylation of amine-moiety-containing drug substances. A very popular combination of polyethylene glycols and iron oxides, used in more than two-thirds of FDA-approved tablet formulation drugs in 2018, was found to be responsible for increased concentrations of N-methyl impurity in the case of paroxetine hydrochloride. We propose a novel testing approach for early identification of potentially problematic combinations of excipients and drug substances. The polyethylene glycol 6000 degradation mechanism and kinetics in the presence of iron oxides is studied. The generality of the proposed stress test setup in view of the susceptibility of amine-moiety-containing drug substances to N-methylation and N-formylation is evaluated. Full article

Drug substance degradation kinetics in solid dosage forms is rarely mechanistically modeled due to several potential micro-environmental and manufacturing related effects that need to be integrated into rate laws. The aim of our work was to construct a model capable of predicting individual degradation product concentrations, taking into account also formulation composition parameters. A comprehensive study was done on active film-coated tablets, manufactured by layering of the drug substance, a primary amine compound saxagliptin, onto inert tablet cores. Formulation variables like polyethylene glycol (PEG) 6000 amount and film-coat polymer composition are incorporated into the model, and are connected to saxagliptin degradation, via formation of reactive impurities. Derived reaction equations are based on mechanisms supported by ab initio calculations of individual reaction activation energies. Alongside temperature, relative humidity, and reactant concentration, the drug substance impurity profile is dependent on micro-environmental pH, altered by formation of acidic PEG degradation products. A consequence of pH lowering, due to formation of formic acid, is lower formation of main saxagliptin degradation product epi-cyclic amidine, a better resistance of formulation to high relative humidity conditions, and satisfactory tablet appearance. Discovered insights enhance the understanding of degradational behavior of similarly composed solid dosage forms on overall drug product quality and may be adopted by pharmaceutical scientists for the design of a stable formulation. Full article

Super-statins are synthetic inhibitors of 3-hydroxy-3-methylglutaryl-coenzyme A reductase, which is the rate-limiting enzyme responsible for the biosynthesis of cholesterol. All of the super-statins with a C=C double bond spacer between the heterocyclic and the dihydroxycarboxylic moiety that are currently on the market exist as E-isomers. To extend the understanding of conformational and thermodynamic preferences of Z-isomeric super-statin analogues, this study focused on analyzing pitavastatin and its lactonized derivatives via NMR spectroscopy and ab initio calculations. Z-isomeric pitavastatin analogues exist in solution as a pair of interconverting rotamers, where the Gibbs free energies between the major and minor rotamers are within 0.12 and 0.25 kcal mol⁻¹ and the rotational energy barriers are between 15.0 and 15.9 kcal mol⁻¹. The analysis of long-range coupling constants and ab initio calculations revealed that rotation across the C5'–C7 single bond is essential for generating a pair of atropisomers. The overall comparison of the results between Z-isomeric pitavastatin and rosuvastatin analogues demonstrated that the former are to some extent more flexible to attain numerous conformations. Demonstrating how structural differences between super-statin analogues induce distinctive conformational preferences provides important insight into the super-statins’ conformational variability and may well improve future drug design. Full article