Search Results (13)

Puerarin (daidzein-8-C-glucoside), one of the bioactive isoflavones, has attracted attention in various industries due to its excellent pharmacological effects such as antioxidant effect, estrogen-like activity, reduction of blood sugar, and neuroprotective effect. Puerarin is most abundantly found in the roots of Pueraria lobata (RPL) among various biomass sources. To improve the utilization feasibility of puerarin, a high-yield extraction process should be designed for RPL. This study aimed to optimize the extraction process to more efficiently recover puerarin from RPL while using generally recognized as safe solvents as extraction solvents, considering the potential industrial applications of puerarin. The extraction variables were optimized by the one-factor-at-a-time method, response surface methodology, and time profiling study. As a result, puerarin yield was achieved at 60.56 mg/g biomass under optimal conditions (ethanol concentration of 46.06%, extraction temperature of 65.02 °C, ratio of extraction solvent to biomass of 11.50 mL/g, and extraction time of 22 min). High puerarin yield achieved in this study contributed to improving the industrial applicability of puerarin. Full article

In this study, a transient viscosity adjustment method using a coaxial nozzle was explored to fabricate nanofibers from non-spinnable m-poly(hydroxyamide) (m-PHA). Unlike conventional electrospinning methods that often require additives to induce fiber formation, this approach relies on a sheath-core configuration, introducing tetrahydrofuran (THF) to the sheath to temporarily adjust solution viscosity. The diffusion of THF into the core m-PHA solution resulted in momentary solidification at the interface, promoting nanofiber formation without compromising polymer solubility. SEM and rheological analyses confirmed that optimized sheath-to-core flow ratios yielded nanofibers with significantly reduced particle formation. Notably, increasing the THF flow rate facilitated a faster solidification rate, enhancing jet elongation and resulting in uniform nanofibers with diameters of approximately 180–190 nm. Although complete nanofibers without beads were not achieved in this study, this coaxial electrospinning approach presents a possible pathway for fabricating nanofibers from polymers with limited spinnability, potentially expanding the application scope of electro-spun materials in high-performance fields. Full article

Sea buckthorn berries (SBB) are well known for being rich in natural bioactive compounds with high pharmacological activity. In this study, the optimization of extraction parameters was performed to recover phenolic compounds with high antioxidant activity from SBB. This study involved a systematic optimization approach, including screening for a variety of parameters, including temperature, time, ethanol concentration, agitation, and solid loading. On the basis of Plackett–Burman design (PBD) model, the two most significant parameters (agitation and solid loading) were selected, and the correlation model between those parameters and multiple responses was derived via response surface methodology (RSM). As a result, the optimal extraction condition for maximizing phenolic content and antioxidant activity was determined to be agitation at 109.54 rpm and a solid loading of 172.67 g/L. Under optimal conditions, SBB extract showed a total phenolic content of 0.21 mg/mL and ABTS and DPPH activities of 27.27% and 58.16%, respectively. The SBB extract prepared under optimal conditions was found to contain caffeic acid, vanillic acid, rutin, and vitamin B1 (thiamine). This work is the first challenge to design an optimization model for the efficient recovery of antioxidants from SBB and is significant in that the model can be applied simply and economically to conventional extraction processes. Full article

Peanut shells (PSs) generated from agricultural waste contain valuable compounds with bioactive properties such as anti-aging, antimicrobial, and antioxidant properties, making it desirable to recycle them as a sustainable resource. The aim of this study is to design an effective luteolin recovery process as the first step of an integrated biorefinery utilizing PSs as raw material. The major extraction variables and their ranges for luteolin recovery from PSs were determined (0–60 °C, 1–5 h, 0–100% MeOH concentration) and a predictive model was derived through a response surface methodology (RSM). Based on the predictive model, the equation determined for the maximal extraction of luteolin at 1 h was as follows: y = –1.8475x + 159.57, and the significant range of variables was as follows: 33.8 °C ≤ temperature (x) ≤ 48.5 °C and 70.0% ≤ MeOH concentration (y) ≤ 97.5%, respectively. High antioxidant and elastase inhibitory activities of PS extracts were confirmed, and these results support their potential to be used as functional materials. In addition, 39.2% of the solid residue after extraction was carbohydrate, which has potential as a carbon source for fermentation. This study provides a useful direction on an integrated biorefinery approach for sustainable agricultural waste valorization. Full article

Carbon aerogel is a promising material in various applications, such as water treatment, insulators, catalysts, and sensors, due to its porosity, low density, conductivity, and good chemical stability. In this study, an inexpensive carbon aerogel was prepared through lyophilization and post-pyrolysis using waste paper. However, carbon aerogel, in the form of short belts, is randomly entangled without a crosslinking agent and has weak mechanical properties, thus limiting its applications, which would otherwise be various. In this paper, a novel strategy is proposed to fabricate a PDMS-coated carbon aerogel (Aerogel@PDMS). Benefiting from microwave heating, precise PDMS coating onto the carbon frame was able to be carried out in a short amount of time. PDMS coating firmly tied the carbon microstructure, maintaining a unique aerogel property without blocking its porous structure. FE-SEM, RAMAN, XPS, and FT-IR were all used to confirm the surface change in PDMS coating. Compressible stability and water contact angle measurement showed that Aerogel@PDMS is a perspective organic solvent absorbent due to its good resilience and its hydrophobicity, and, as a result, its organic solvent absorption capacity and repeated absorption were evaluated, ultimately suggesting a promising material in oil clean-up and pollution remediation in water. Based on our experimental results, we identified elastic carbon aerogels provided by a novel coating technology. In the future, then, the developed carbon/PDMS composite can be examined as a promising option for various applications, such as environmental sensors, virus sensors, and wearable sensors. Full article

Mandarin peels (MPs), a food-processing residue, have several restrictions on their disposal and can cause serious environmental pollution. In this study, MP was used to fabricate a functional bioelastomer with antioxidant and antibacterial activities. Bioactive compounds were recovered from MPs in liquid form and added to the bioelastomer during fabrication to maintain the mechanical strength of the bioelastomer. The radical scavenging activities of the fabricated bioelastomer (B–MPE 15%) were 3.3% for DPPH and 20.8% for ABTS, respectively. In addition, B–MPE 15% exhibited antibacterial activity against gram-positive (Staphylococcus aureus), gram-negative (Escherichia coli), and antibiotic-resistant bacteria (Methicillin-resistant S. aureus and Vancomycin resistant Enterococcus). The chemical properties of B–MPE 15% were not significantly different from those of the control group (bare PDMS). Tensile strength, elongation at break, and water vapor transmission rate of B–MPE 15% were found to be 5.1 N/mm², 649%, and 33.3 g/(m² day), respectively. Therefore, the addition of MP extracts did not significantly affect the physical properties. The fabricated bioelastomer with antibacterial and antioxidant activities is expected to be utilized in the food packaging, pharmaceutical, and medical industries. Our research is expected to represent a future-oriented strategy for realizing carbon neutrality by upcycling food waste. Full article

Food waste-based biorefineries are considered an essential concept for the implementation of a sustainable circular economy. In this study, cheese whey powder (CWP), a dairy industry waste, was utilized to produce cyclosporin A (CsA). As it is difficult to valorize CWP because its components vary depending on the origin, a process for sugar conversion via acid hydrolysis was designed to obtain reproducible results using refined whey powder (WP) of a consistent quality. Acid hydrolysis was carried out using 2% (w/w) HCl and biomass loading of 50 g/L at 121 °C for 20 min. CWP hydrolysates were utilized to ferment Tolypocladium inflatum ATCC 34921. CsA production was found to be 51.3 mg/L at 12 days, a 1.4-fold increase compared to the control (commercial glucose, 36.3 mg/L). Our results showed that 100 g CWP can be converted to 81.8 mg of CsA. This finding demonstrated that CWP can be used as a sustainable feedstock for biorefineries. Full article

Orostachys species have been recognized as medicinal herbs in East Asia. Although O. fimbriata is known as a traditional medicine, its antioxidant properties have not been investigated compared to other Orostachys species. In this study, we characterized the antioxidant compounds and determined the antioxidant activity of O. fimbriata for the first time. As a result, 1 g of O. fimbriata extracts contains 288.5 ± 7.4 mg polyphenols, which contains 159.7 ± 8.3 mg flavonoids. In particular, 21.6%, 6.6%, and 2.6% of the total flavonoids were identified as epicatechin gallate, quercetin, and kaempferol, respectively, by LC-MS system. The DPPH IC₅₀, ABTS IC₅₀, and FRAP value of the extracts was determined to be 27.6 ± 5.5 μg/mL, 125.7 ± 6.0 μg/mL, and 115.0 ± 4.4 mmol/L, respectively. These activities were 30–57% of the positive control, ascorbic acid. In conclusion, it was demonstrated that O. fimbriata has outstanding antioxidant properties. This study highlights the need for further investigations toward in-depth research on the pharmacological functions of O. fimbriata. Full article

Haematococcus pluvialis is a microalgae actively studied for the production of natural astaxanthin, which is a powerful antioxidant for human application. However, it is economically disadvantageous for commercialization owing to the low productivity of astaxanthin. This study reports an effective screening strategy using the negative phototaxis of the H. pluvialis to attain the mutants having high astaxanthin production. A polydimethylsiloxane (PDMS)-based microfluidic device irradiated with a specific light was developed to efficiently figure out the phototactic response of H. pluvialis. The partial photosynthesis deficient (PP) mutant (negative control) showed a 0.78-fold decreased cellular response to blue light compared to the wild type, demonstrating the positive relationship between the photosynthetic efficiency and the phototaxis. Based on this relationship, the Haematococcus mutants showing photosensitivity to blue light were selected from the 10,000 random mutant libraries. The M1 strain attained from the phototaxis-based screening showed 1.17-fold improved growth rate and 1.26-fold increases in astaxanthin production (55.12 ± 4.12 mg g⁻¹) in the 100 L photo-bioreactor compared to the wild type. This study provides an effective selection tool for industrial application of the H. pluvialis with improved astaxanthin productivity. Full article

Expectation for renewable energy is increasing due to environmental pollution such as fossil fuel depletion, CO₂ emission, and harmful gases. Therefore, in this study, extracted sugars of microalgae, which cause algal blooms and crude glycerol, a biodiesel industry byproduct, were used simultaneously to produce 2,3-BDO. The 2,3-BDO production using only extracted algal sugars was about 4.8 g/L at 18 h, and the production of 2,3-BDO using both extracted algal sugar and crude glycerol was about 7 g/L at 18 h. It was confirmed that the main culture with crude glycerol was increased 1.5-fold compared to the case of using only extracted algal sugars. In addition, four components of the main medium (ammonium sulfate, casein hydrolysate, yeast extract, and crude glycerol) were statistically optimized and the concentrations of the medium were 12, 16, 12, and 13 g/L, respectively. In addition, the final 2,3-BDO production was about 11g/L, which 1.6-fold higher than before the optimization process. As a result, it was confirmed that 2,3-BDO production is possible through the simultaneous use of algal sugars and crude glycerol, which can greatly contribute to the development of zero-waste processes. Full article

Carbon-neutral and eco-friendly biomass-based processes are recognized as a frontier technology for sustainable development. In particular, biopolymers are expected to replace petrochemical-based films that are widely used in food packaging. In this study, the fabrication conditions of functional (antioxidant and antibacterial) bioelastomers were investigated using by-products from the juice processing (experimental group) and freeze-dried whole fruit (control group). Bioelastomer was fabricated by a casting method in which polydimethylsiloxane (PDMS) was mixed with 25 or 50 wt% aronia powder (juice processing by-products and freeze-dried whole fruit). The mechanical properties of the bioelastomers were measured based on tensile strength and Young’s modulus. When the mixture contained 50 wt% aronia powder, the strength was not appropriate for the intended purpose. Next, the surface and chemical properties of the bioelastomer were analyzed; the addition of aronia powder did not significantly change these properties when compared to PDMS film (no aronia powder). However, the addition of aronia powder had a significant effect on antioxidant and antimicrobial activities and showed higher activity with 50 wt% than with 25 wt%. In particular, bioelastomers fabricated from aronia juice processing by-products exhibited approximately 1.4-fold lower and 1.5-fold higher antioxidant and antimicrobial activities, respectively, than the control group (bioelastomers fabricated from freeze-dried aronia powder). Full article

Cordycepin, a beneficial bioactive product specifically found in Cordyceps, has received attention in various bioindustrial applications such as in pharmaceuticals, functional foods, and cosmetics, due to its significant functions. However, low productivity of cordycepin is a barrier to commercialization. In this study, Cordyceps militaris was mutated by UV irradiation to improve the cordycepin production. The highest producer KYL05 strain was finally selected and its cordycepin production was increased about 1.5-fold compared to wild type. In addition, the effects of culture conditions were fundamentally investigated. Optimal conditions were as follows: pH 6, temperature of 25 °C, shaking speed of 150 rpm, and culture time of 6 days. Effects of medium component on cordycepin production were also investigated by using various carbon and nitrogen sources. It was found that glucose and casein hydrolysate (CH) were most effective as carbon and nitrogen sources in cordycepin production (2.3-fold improvement) with maximum cordycepin production of about 445 mg/L. In particular, production was significantly affected by CH. These results should be of value in improving the efficiency of mass production of cordycepin. Full article

Conductive biopolymers, an important class of functional materials, have received attention in various fields because of their unique electrical, optical, and physical properties. In this study, the polymerization of heme into hemozoin was carried out in an in vitro system by the newly developed heme polymerase (histidine-rich protein 2 (HRP-II)). The HRP-II was produced by recombinant E. coli BL21 from the Plasmodium falciparum gene. To improve the hemozoin production, the reaction conditions on the polymerization were investigated and the maximum production was achieved after about 790 μM at 34 °C with 200 rpm for 24 h. As a result, the production was improved about two-fold according to the stepwise optimization in an in vitro system. The produced hemozoin was qualitatively analyzed using the Fourier transform infrared (FTIR) spectroscopy, energy dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). Finally, it was confirmed that the enzymatically polymerized hemozoin had similar physical properties to chemically synthesized hemozoin. These results could represent a significant potential for nano-biotechnology applications, and also provide guidance in research related to hemozoin utilization. Full article