Search Results (21)

Wound healing is known to be a complicated and intricate process and commonly classified as chronic or acute. Patients with chronic wounds are of public health concern, and require more attention onto skin lesions, including atopic dermatitis. Despite being a natural process, healing can be impaired by existing chronic de diseases such as diabetes, for example. Recently, wound dressings based in nanotechnology systems have emerged as a viable option to improve the healing process. Current advances in nanotechnology-based systems to release growth factors and bioactive agents represent a great opportunity to develop new therapies for wound treatments. It is essential that healthcare professionals understand the key processes involved in the healing cascade, to maximize care with these patients and minimize the undesirable outcomes of non-healing wounds. Therefore, this review aims to summarize the healing process phases and provide a general overview of dressings based in nanotechnology using biomaterials for the release of active agents in wound site. Full article

Green tea (GT) is a natural antioxidant, sensitive to oxidation after preparation. Lyotropic liquid crystals (LLCs) are nanostructured systems used to incorporate bioactive compounds. High-intensity interval training (HIIT) is a workout modality that increases the production of reactive oxygen species (ROS). Thus, this research aimed to compare the effects of GT and GT loaded in LLC in animals subjected to HIIT, considering hematological, biochemical and histological parameters, redox status, and body mass. Monoolein, GT in infusion and Poloxamer 407 were mixed to obtain nanoparticles of LLC (NP-LLC). Healthy male rats were randomized into six groups (n = 6/group): Control (C), GT, GT-NP-LLC, Exercise (Ex), GT+Ex, GT-NP-LLC+Ex. Body weight was significantly lower in all groups subjected to HIIT compared to C. The percentages of body mass reduction were 11.3, 13.0, 10.0 and 11.0% for Ex, GT+Ex, GT-NP-LLC and GT-NP-LLC+Ex, respectively, compared to control. GT-NP-LLC and Ex reduced triglycerides compared to C. GT and GT-NP-LLC supplementation combined with HIIT presented higher muscle hypertrophy (25 and 21%, respectively), better physical conditioning, and reduced body weight gain rate compared to HIIT by itself. Moreover, the effects of GT-NP-LLC itself on body mass and biochemical parameters are promising, suggesting NP-LLC could improve the bioavailability of GT. Full article

Every year, more than thirty thousand tons of Cashew gum (Anacardium occidentale, family: Anacardiaceae) are produced in Brazil; however, only a small amount is used for different applications in foodstuff and in pharmaceutical industries. As a raw material for the production of drug delivery systems, cashew gum is still regarded as an innovative compound worth to be exploited. In this work, cashew gum was extracted from the crude exudate of cashew tree employing four methodologies resulting in a light brown powder in different yields (40.61% to 58.40%). The total ashes (0.34% to 1.05%) and moisture (12.90% to 14.81%) were also dependent on the purification approach. FTIR spectra showed the typical bands of purified cashew gum samples, confirming their suitability for the development of a pharmaceutical product. Cashew gum nanoparticles were produced by nanoprecipitation resulting in particles of low polydispersity (<0.2) and an average size depending on the percentage of the oil. The zeta potential of nanoparticles was found to be below 20 mV, which promotes electrostatic stability. Encapsulation efficiencies were above 99.9%, while loading capacity increased with the increase of the percentage of the oil content of particles. The release of the oil from the nanoparticles followed the Korsmeyer–Peppas kinetics model, while particles did not show any signs of toxicity when tested in three distinct cell lines (LLC-MK2, HepG2, and THP-1). Our study highlights the potential added value of using a protein-, lignans-, and nucleic acids-enriched resin obtained from crude extract as a new raw material for the production of drug delivery systems. Full article

Multi-Walled Carbon Nanotubes (MWCNT) have been functionalized with rutin through three steps (i. reaction step; ii. purification step; iii. drying step) and their physicochemical properties investigated with respect to morphological structure, thermal analysis, Fourier Transform Infrared Spectroscopy (FTIR), and cytotoxicity. The molecular docking suggested the rutin-functionalized MWCNT occurred by hydrogen bonds, which was confirmed by FTIR assays, corroborating the results obtained by thermal analyses. A tubular shape, arranged in a three-dimensional structure, could be observed. Mild cytotoxicity observed in 3T3 fibroblasts suggested a dose–effect relationship after exposure. These findings suggest the formation of aggregates of filamentous structures on the cells favoring the cell penetration. Full article

Nanopesticides are nanostructures with two to three dimensions between 1 to 200 nm, used to carry agrochemical ingredients (AcI). Because of their unique properties, the loading of AcI into nanoparticles offers benefits when compared to free pesticides. However, with the fast development of new engineered nanoparticles for pests’ control, a new type of environmental waste is being produced. This paper describes the nanopesticides sources, the harmful environmental and health effects arising from pesticide exposure. The potential ameliorative impact of nanoparticles on agricultural productivity and ecosystem challenges are extensively discussed. Strategies for controlled release and stimuli-responsive systems for slow, sustained, and targeted AcI and genetic material delivery are reported. Special attention to different nanoparticles source, the environmental behavior of nanopesticides in the crop setting, and the most recent advancements and nanopesticides representative research from experimental results are revised. This review also addresses some issues and concerns in developing, formulating and toxicity pesticide products for environmentally friendly and sustainable agriculture. Full article

The therapeutic use of peptides has increasingly recognized in the development of new therapies. However, the susceptible enzymatic cleavage is a barrier that needs to overcome. Nose-to-brain delivery associated with liposomes can protect peptides against biodegradation and improve the accessibility to brain targets. The aim was to develop a liposomal formulation as ghrelin carrier. The quality by design (QbD) approach was used as a strategy for method development. The initial risk assessments were carried out using a fishbone diagram. A screening design study was performed for the critical material attributes/critical process parameters (CMAs/CPPs) on critical quality attributes (CQAs). Liposomes were obtained by hydrating phospholipid films, followed by extrusion or homogenization, and coated with chitosan. The optimized liposome formulation was produced by high-pressure homogenization coated with chitosan, and the resulted were liposomes size 72.25 ± 1.46 nm, PDI of 0.300 ± 0.027, the zeta potential of 50.3 ± 1.46 mV, and encapsulation efficiency of 53.2%. Moreover, chitosan coating improved performance in ex vivo permeation and mucoadhesion analyzes when compared to the uncoated liposome. In this context, chitosan coating is essential for the performance of the formulations in the ex vivo permeation and mucoadhesion analyzes. The intranasal administration of ghrelin liposomes coated with chitosan offers an innovative opportunity to treat cachexia. Full article

As an immune-privileged target organ, the eyes have important superficial and internal barriers, protecting them from physical and chemical damage from exogenous and/or endogenous origins that would cause injury to visual acuity or even vision loss. These anatomic, physiological and histologic barriers are thus a challenge for drug access and entry into the eye. Novel therapeutic concepts are highly desirable for eye treatment. The design of an efficient ocular drug delivery system still remains a challenge. Although nanotechnology may offer the ability to detect and treat eye diseases, successful treatment approaches are still in demand. The growing interest in nanopharmaceuticals offers the opportunity to improve ophthalmic treatments. Besides their size, which needs to be critically monitored, nanopharmaceuticals for ophthalmic applications have to be produced under sterilized conditions. In this work, we have revised the different sterilization and depyrogenation methods for ophthalmic nanopharmaceuticals with their merits and drawbacks. The paper also describes clinical sterilization of drugs and the outcomes of inappropriate practices, while recent applications of nanopharmaceuticals for ocular drug delivery are also addressed. Full article

Oral hyaluronic acid (HA) is a ubiquitous biopolymer that has gained attention as a treatment for local or systemic diseases. Here, we prepared and characterized structures of free HA (f-HA) with a high (>10⁵ Da), intermediate (≤10⁵ Da), and low (≤10⁴ Da) average molar mass (MM); nanoparticles crosslinked with adipic dihydrazide (n-HA); and mixed formulations (mixed-HA) containing f-HA and n-HA. MM distribution determined the structure, hydrodynamic diameter, and zeta potential of the f-HAs. Crosslinking changed the physicochemical properties in n-HA. In vitro tack adhesion assays, using mucin tablets or a viable rat intestinal mucosa, showed better mucoadhesion with f-HA (intermediate MM) and mixed-HA (25% n-HA), especially in the jejunum segment. High MM f-HA presented negligible mucoadhesion. n-HA showed the deepest diffusion into the porous of the membranes. In vivo results showed that, except for high MM f-HA, there is an inverse relationship between rheological changes in the intestinal membrane macerates resulting from mucoadhesion and the effective intestinal permeability that led to blood clearance of the structures. We conclude that the n-HA formulations are promising for targeting other tissues, while formulations of f-HA (intermediate MM) and mixed-HA are better for treating dysbiosis. Full article

Cosmetics composed of synthetic and/or semi-synthetic polymers, associated or not with natural polymers, exhibit a dashing design, with thermal and chemo-sensitive properties. Cosmetic polymers are also used for the preparation of nanoparticles for the delivery of, e.g., fragrances, with the purpose to modify their release profile and also reducing the risk of evaporation. Besides, other cosmetically active nutrients, dermal permeation enhancers, have also been loaded into nanoparticles to improve their bioactivities on the skin. The use of natural polymers in cosmetic formulations is of particular relevance because of their biocompatible, safe, and eco-friendly character. These formulations are highly attractive and marketable to consumers, and are suitable for a plethora of applications, including make-up, skin, and hair care, and as modifiers and stabilizers. In this review, natural synthetic, semi-synthetic, and synthetic polymers are discussed considering their properties for cosmetic applications. Their uses in conventional and novel formulations are also presented. Full article

Isopentyl caffeate (ICaf) is a bioactive ester widely distributed in nature. Our patented work has shown promising results of this molecule against Leishmania. However, ICaf shows poor solubility, which limits its usage in clinical settings. In this work, we have proposed the development of an inclusion complex of ICaf in β-cyclodextrin (β-CD), with the aim to improve the drug solubility, and thus, its bioavailability. The inclusion complex (ICaf:β-CD) was developed applying three distinct methods, i.e., physical mixture (PM), kneading (KN) or co-evaporation (CO) in different molar proportions (0.25:1, 1:1 and 2:1). Characterization of the complexes was carried out by thermal analysis, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and molecular docking. The ICaf:β-CD complex in a molar ratio of 1:1 obtained by CO showed the best complexation and, therefore, was selected for further analysis. Solubility assay showed a marked improvement in the ICaf:β-CD (CO, 1:1) solubility profile when compared to the pure ICaf compound. Cell proliferation assay using ICaf:β-CD complex showed an IC₅₀ of 3.8 and 2.7 µg/mL against L. amazonesis and L. chagasi promastigotes, respectively. These results demonstrate the great potential of the inclusion complex to improve the treatment options for visceral and cutaneous leishmaniases. Full article

Cachexia, a severe multifactorial condition that is underestimated and unrecognized in patients, is characterized by continuous muscle mass loss that leads to progressive functional impairment, while nutritional support cannot completely reverse this clinical condition. There is a strong need for more effective and targeted therapies for cachexia patients. There is a need for drugs that act on cachexia as a distinct and treatable condition to prevent or reverse excess catabolism and inflammation. Due to ghrelin properties, it has been studied in the cachexia and other treatments in a growing number of works. However, in the body, exogenous ghrelin is subject to very rapid degradation. In this context, the intranasal release of ghrelin-loaded liposomes to cross the blood-brain barrier and the release of the drug into the central nervous system may be a promising alternative to improve its bioavailability. The administration of nose-to-brain liposomes for the management of cachexia was addressed only in a limited number of published works. This review focuses on the discussion of the pathophysiology of cachexia, synthesis and physiological effects of ghrelin and the potential treatment of the diseased using ghrelin-loaded liposomes through the nose-to-brain route. Full article

The formation of mucosal ulcers is an end result of epithelial damage, and it occurs due to some specific causes, such as trauma, aphthous stomatitis, lichen planus and lichenoid reactions, cytotoxic effects of chemotherapy and radiation, and drug-induced hypersensitivity reactions and malignant settings. This study focused on films for target drug delivery with respect to the treatment of the diseases of the oral mucosa, specifically mucositis. The results of a single clinical study as a pre-experimental design was performed and followed up to the outcome until 30 days. The polymeric film was prepared in a mucoadhesive bilayer structure: the basal layer with lidocaine HCl had a faster release than the apical layer with benzydamine HCl and N-acetyl-cysteine. Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and SEM characterized the physical–chemical and morphological properties. The cell viability and cytotoxicity were evaluated in cell line MCF7. The transport mechanism of the solvent (swelling) and the drugs in the basal or apical layer (drug release) was explained with mathematical models. To evaluate the effect of movement inside the mouth, the folding endurance was determined. The mucoadhesive bilayer film is biologically safe and stimulates cellular proliferation. A single study in vivo demonstrated the therapeutic effect of the mucoadhesive bilayer film in buccal mucositis. Full article

This review discusses the impact of curcumin—an aromatic phytoextract from the turmeric (Curcuma longa) rhizome—as an effective therapeutic agent. Despite all of the beneficial health properties ensured by curcumin application, its pharmacological efficacy is compromised in vivo due to poor aqueous solubility, high metabolism, and rapid excretion that may result in poor systemic bioavailability. To overcome these problems, novel nanosystems have been proposed to enhance its bioavailability and bioactivity by reducing the particle size, the modification of surfaces, and the encapsulation efficiency of curcumin with different nanocarriers. The solutions based on nanotechnology can improve the perspective for medical patients with serious illnesses. In this review, we discuss commonly used curcumin-loaded bio-based nanoparticles that should be implemented for overcoming the innate constraints of this natural ingredient. Furthermore, the associated challenges regarding the potential applications in combination therapies are discussed as well. Full article

This review offers a systematic discussion about nanotoxicology and nanosafety associated with nanomaterials during manufacture and further biomedical applications. A detailed introduction on nanomaterials and their most frequently uses, followed by the critical risk aspects related to regulatory uses and commercialization, is provided. Moreover, the impact of nanotoxicology in research over the last decades is discussed, together with the currently available toxicological methods in cell cultures (in vitro) and in living organisms (in vivo). A special focus is given to inorganic nanoparticles such as titanium dioxide nanoparticles (TiO₂NPs) and silver nanoparticles (AgNPs). In vitro and in vivo case studies for the selected nanoparticles are discussed. The final part of this work describes the significance of nano-security for both risk assessment and environmental nanosafety. “Safety-by-Design” is defined as a starting point consisting on the implementation of the principles of drug discovery and development. The concept “Safety-by-Design” appears to be a way to “ensure safety”, but the superficiality and the lack of articulation with which it is treated still raises many doubts. Although the approach of “Safety-by-Design” to the principles of drug development has helped in the assessment of the toxicity of nanomaterials, a combination of scientific efforts is constantly urgent to ensure the consistency of methods and processes. This will ensure that the quality of nanomaterials is controlled and their safe development is promoted. Safety issues are considered strategies for discovering novel toxicological-related mechanisms still needed to be promoted. Full article