Search Results (63)

The Stability Toolkit for the Appraisal of Bio/Pharmaceuticals’ Level of Endurance (STABLE) is introduced and proposed as a comprehensive tool and software to evaluate the stability of active pharmaceutical ingredients (APIs) under various stress conditions. In the pharmaceutical industry, stability testing is a critical step in the drug development process, ensuring the quality, safety, and efficacy of APIs. Traditional stability tests—such as real-time, accelerated, and forced degradation testing—often face challenges, including inconsistent interpretation and implementation across different regions and organizations. STABLE addresses these challenges by providing a standardized and holistic approach to assessing drug stability across five key stress conditions: oxidative, thermal, acid-catalyzed hydrolysis, base-catalyzed hydrolysis, and photostability. Beyond its role as an evaluation tool, STABLE also serves as a practical guide for chemists, encouraging a more complete and thoughtful approach to stability studies. While many investigations focus solely on acid- and base-catalyzed hydrolysis, other critical conditions—such as photostability—are often underexplored or entirely omitted. By highlighting the importance of evaluating all relevant degradation pathways, STABLE promotes more robust and informed stability testing protocols. The index utilizes a color-coded scoring system to quantify and compare stability, facilitating consistent assessments across different APIs. This paper discusses the methodology of STABLE, including the scoring system and specific criteria applied under each condition. This tool is introduced to reflect intrinsic degradation susceptibility under forced conditions. The software is freely available as an open-source tool at bit.ly/STABLE2025, enabling broader accessibility and implementation across the pharmaceutical research community. Full article

The objective of this work is to study the anti-inflammatory effect in vitro and in vivo of microwave (MW) extracts of Thymus algeriensis. The in vitro study was performed by the human red blood cell protection test, while the in vivo study used the carrageenan-induced rat paw edema model. The experimental results were confirmed by a molecular docking calculation. The results indicated that all the microwave extracts have a moderate anti-inflammatory effect, depending on their richness in phenolic compounds. Among the extracts studied, the one obtained at 100 °C for 15 min exhibited the most pronounced anti-inflammatory effect, with an inhibition of 78.52%, which is attributed to its high flavonoid content. In particular, the flavonoids naringin and catechin showed the best affinity for the target protein, with values of −10.3 kcal/mol and −9.2 kcal/mol, respectively, as well as low inhibition constants of 0.028 μM and 0.18 μM. These results indicate that these flavonoids generate interactions that enhance the stability of the target ligand–protein complex, thus contributing to the observed anti-inflammatory effect. Full article

Background: Currently, the procedures and methods applied in biological and medical fields for the determination of reactive oxygen and nitrogen species (RONS), primarily rely on spectrophotometric techniques, which involve the use of colorimetric reagents. While these methods are widely accepted, they exhibit significant limitations from an analytical standpoint, particularly due to potential inaccuracies, artifacts, and pronounced susceptibility to matrix effects. The purpose of this Technical Note is to demonstrate the application of ion chromatography—a robust and well-established analytical technique—for the quantification of RONS produced in cell culture media through the exposure to cold atmospheric plasma (CAP), an innovative therapeutic approach for cancer treatment, known as CAP indirect treatment. In addition, the present protocol proposes to apply the pharmacokinetics principles to the RONS generated in plasma-treated liquids (PTLs) following CAP exposure. Methods: The strategy involves elucidating the kinetic profiles of certain characteristic species by evaluating their half-life in the specific media used for cell cultures and investigating their “pharmacokinetic” (PK) profile. In this approach the drug dose is represented by the plasma power and the infusion time corresponds to the exposure time of the culture medium to CAP. Volume-dependent results were shown, focusing on nitrites and nitrates activities, justifying cellular inhibition. Results: This methodology enables the correlation of the PTL biological effects on different cell lines with the PK profiles (dose/time) obtained via ion chromatography. Conclusions: In conclusion, being a simple and green method, it could be used as an alternative to toxic reactions and analytical techniques with higher detection limits, while achieving good resolution. Full article

Abstract: The green analytical procedure index (GAPI) has been widely used to assess the greenness of different steps in analytical methodology. In the GAPI index, the different stages of the chemical analysis process are depicted using five pentagrams divided in subsections, labeled green, yellow, or red according to the degree of greenness. This GAPI tool provides a quick overview of the environmental impact and safety of the procedure. However, there is no total score that can be calculated from the GAPI metric to enable comparison between methods. In this work, a modified GAPI tool (MoGAPI) and software have been developed and applied to address the limitations of the current GAPI metric. The presented tool offers a more precise assessment of greenness, while the software simplifies and expedites its application. It also combines the advantages of the analytical Eco-Scale with the merits of the widely used GAPI metric. This tool was successfully applied to calculate the greenness of a few case studies and applications to show the applicability of this modified metric. The software for the MoGAPI tool is also freely available (open source) at bit.ly/MoGAPI to facilitate application and method comparison. The MoGAPI tool and its software represent a significant advancement in greenness assessment, providing researchers with a robust and user-friendly means to evaluate and compare analytical methods. Full article

Accuracy in the evaluation of death-induced tissue degradation for thanato-chronological purposes is strictly dependent on the condition of the biological source as well as on the precision of post-mortem interval (PMI) estimation. Thus, the optimization of tissue handling and identification of sensitive post-mortem biomarkers could help establish a timeline for post-mortem events. To this aim, we investigated the proteome changes in cortex samples of 6-week-old female SAMR1 mice over a post-mortem time course. After death, brain tissue was removed immediately (T0), and after 4, 8, 12, 24, and 32 h, four mice were used for each time period, and animals were maintained at 4 °C until brain removal. Dissected tissues were frozen at −80 °C until processed. Proteomic analysis, performed on samples related to early and late PMIs (<24 h and >24 h post-mortem, respectively) showed protein level changes as compared to T0 samples, with a remarkable increase in Calpain11 in the early PMI, as well as in Caspases 7 and 8 together with Gasdermin 3 in late PMI. These findings were confirmed by LIFT mass spectrometry technology and western blot analysis and, although requiring further investigation in other biological samples, suggest that these proteins could be considered as putative biomarkers of different PMIs. Full article

Among many diseases, allergy appears to be a serious problem for human beings. Various forms of allergic disorders make people tense, leading to some other health issues. Many medications, including nonracemic and racemic ones, are used to treat this problem. It is important to have exact analysis strategies just to see any medication side effects, plasma profiles, and working efficiency. Therefore, efforts are made to review simple and chiral HPLC methods for antiallergic drugs; HPLC is the best analytical technique. The highlights in this article include the world scenario, causes of allergy, the effect of allergy on the economy, the mechanism of allergy in humans, classes of antiallergic drugs, simple drugs, chiral drugs, analysis by HPLC, and the chiral recognition mechanism. Moreover, attempts are also made to highlight the management of allergies and future perspectives. Full article

Nowadays, it is vital to have new, complete, and rapid methods to screen and follow pharmacotoxicological and forensic cases. In this context, an important role is undoubtedly played by liquid chromatography-tandem mass spectrometry (LC-MS/MS) thanks to its advanced features. This instrument configuration can offer comprehensive and complete analysis and is a very potent analytical tool in the hands of analysts for the correct identification and quantification of analytes. The present review paper discusses the applications of LC-MS/MS in pharmacotoxicological cases because it is impossible to ignore the importance of this powerful instrument for the rapid development of pharmacological and forensic advanced research in recent years. On one hand, pharmacology is fundamental for drug monitoring and helping people to find the so-called “personal therapy” or “personalized therapy”. On the other hand, toxicological and forensic LC-MS/MS represents the most critical instrument configuration applied to the screening and research of drugs and illicit drugs, giving critical support to law enforcement. Often the two areas are stackable, and for this reason, many methods include analytes attributable to both fields of application. In this manuscript, drugs and illicit drugs were divided in separate sections, with particular attention paid in the first section to therapeutic drug monitoring (TDM) and clinical approaches with a focus on central nervous system (CNS). The second section is focused on the methods developed in recent years for the determination of illicit drugs, often in combination with CNS drugs. All references considered herein cover the last 3 years, except for some specific and peculiar applications for which some more dated but still recent articles have been considered. Full article

One of the most discussed topics concerns the sample preparation before the analysis and, therefore, all the operations necessary to eliminate the interferents, clean up the specimens, and extract the analytes of interest, reducing the matrix effect. This review highlights the fundamental steps in the treatment of postmortem samples used in forensic analysis. Through critical literature research, it was possible to choose among the countless works that could provide a general overview of the state-of-the-art in this field. Different biological matrices have been considered; blood and urine (the traditional biological fluids) are used to investigate the presence of substances that may have caused death, whilst other body fluids, such as bile and oral fluids, are still under discussion for their usability (and suitability). In the second part of the review, all the solid matrices obtained after autopsy were further divided into conventional and unconventional matrices to facilitate proper understanding. The choice of literature was also made according to the most widely used pretreatment techniques and the most representative innovative techniques. Full article

The primary cause of poor and ambiguous results obtained from the bioanalytical process is the sample pre-treatment, especially in clinical analysis because it involves dealing with complex sample matrices, such as whole blood, urine, saliva, serum, and plasma. So, the aim of this review is to focus attention on the classical and new techniques of pre-treatment for biological samples used in the bioanalytical process. We discussed the methods generally used for these types of complex samples. Undoubtedly, it is a daunting task to deal with biological samples because the analyst may encounter a substantial loss of the analytes of interest, or the overall analysis may be too time-consuming. Nowadays, we are inclined to use green solvents for the environment, but without sacrificing analytical performance and selectivity. All the characteristics mentioned above should be added to the difficulty of the withdrawal of samples like blood because it can be an invasive practice. For these reasons, now we can also find in the literature the use of saliva as alternative biological samples and new techniques that do not require substantial sample pre-treatment, such as fabric phase sorptive extraction (FPSE). The text has been divided into the following two distinct parts: firstly, we described clinical applications under different subsections, such as anticancer drugs, antibiotics, vitamins, antivirals, non-steroidal anti-inflammatory drugs, statin, imidazoles, and triazoles. The second part is dedicated to sample preparation techniques for diagnostic purposes and is divided into the following different sample preparation techniques: solid-phase microextraction (SPME), microextraction by packed sorbent (MEPS), dispersive liquid–liquid microextraction (DDLME), and fabric phase sorptive extraction (FPSE). Full article

Strawberries and raspberries are susceptible to physiological and biological damage. Due to the consumer concern about using pesticides to control fruit rot, recent attention has been drawn to essential oils. Microbiological activity evaluations of different concentrations of tested EOs (cinnamon, clove, bergamot, rosemary and lemon; 10% DMSO-PBS solution was used as a diluent) against fruit rot fungal strains and a fruit-born human pathogen (Escherichia coli) indicated that the highest inhibition halos was found for pure cinnamon and clove oils; according to GC-MS analysis, these activities were due to the high level of the bioactive compounds cinnamaldehyde (54.5%) in cinnamon oil and eugenol (83%) in clove oil. Moreover, thermogravimetric evaluation showed they were thermally stable, with temperature peak of 232.0 °C for cinnamon and 200.6/234.9 °C for clove oils. Antibacterial activity evaluations of all tested EOs at concentrations from 5–50% (v/v) revealed a concentration of 10% (v/v) to be the minimum inhibitory concentration and minimum bactericidal concentration. The physicochemical analysis of fruits in an in vivo assay indicated that used filter papers doped with 10% (v/v) of cinnamon oil (stuck into the lids of plastic containers) were able to increase the total polyphenols and antioxidant activity in strawberries after four days, with it being easier to preserve strawberries than raspberries. Full article

Polymer colloids have remarkable features and are gaining importance in many areas of research including medicinal science. Presently, the innovation of cancer drugs is at the top in the world. Polymer colloids have been used as drug delivery and diagnosis agents in cancer treatment. The polymer colloids may be of different types such as micelles, liposomes, emulsions, cationic carriers, and hydrogels. The current article describes the state-of-the-art polymer colloids for the treatment of cancer. The contents of this article are about the role of polymeric nanomaterials with special emphasis on the different types of colloidal materials and their applications in targeted cancer therapy including cancer diagnoses. In addition, attempts are made to discuss future perspectives. This article will be useful for academics, researchers, and regulatory authorities. Full article

Early life conditions are associated with lung function and the development of respiratory and non-respiratory illnesses. The relationship with birthweight (BW), however, is conflicting. We examined associations of self-reported BW with lung function and the development of respiratory and also non-respiratory diseases within the GEIRD (Gene–Environment Interaction in Respiratory Diseases) project, an Italian multi-centre, multi-case control study involving cases of COPD, asthma, allergic rhinitis and controls. Multinomial logistic regression was performed with case/control status as response variable; BW as main determinant; and adjusting for sex, age and smoking status. Of the 2287 participants reporting BW, 6.4% (n = 147) had low BW (<2500 g), and this proportion was greater in women than men (7.8% vs. 5.1%; p = 0.006). Both men and women with low BW were shorter than those with normal BW (mean ± SD: 160.2 ± 5.5 vs. 162.6 ± 6.5 cm in women, p = 0.009; 172.4 ± 6.1 vs. 174.8 ± 7.2 cm in men, p < 0.001). Although FEV1 and FVC were reduced in individuals with low BW, this was explained by associations with sex and height. In multivariable analysis, BW was not associated with respiratory diseases in adulthood. However, those with low BW had a higher risk of self-reported hospitalisation for lung disease before the age of two (10.3% vs. 4.1%; p < 0.001), severe respiratory infection before the age of five (16.9% vs. 8.8%; p = 0.001) and hypertension in adulthood (29.9% vs. 23.7%; p = 0.001); however, they had a lower risk of arrhythmia (2.7% vs. 5.8%; p = 0.027). Full article

We report the case of a 54-year-old man who died in a motorcycle accident due to loss of control of the vehicle on a viaduct. No other vehicles were apparently involved, except for a car hit by the motorcycle after it fell. A post-mortem CT scan (computed tomography scan) was performed showing complex head trauma with a subarachnoid hemorrhage and multiple skull and facial bone fractures. A forensic cinematic reconstruction performed by an engineer was needed to exclude other incident causes other than the loss of control. The multidisciplinary approach that included autopsy findings, a cinematic reconstruction, a helmet test and an examination played a key role in clarifying the dynamics of the accident, allowing us to explain how the death occurred despite the motorcyclist’s helmet use. The cause of death was identified as a penetrating head trauma with cerebral material exposure, produced by the impact of the head against a fixed bolt in the guardrail base. Despite the use of the helmet, the impact force was enough to render the protection ineffective and allowed the bolt to penetrate through the helmet and the skull. Full article

This work was undertaken to explore the phytochemical composition, antioxidant, and enzyme-inhibiting properties of Neurada procumbens L. extracts/fractions of varying polarity (methanol extract and its fractions including n-hexane, chloroform, n-butanol, and aqueous fractions). A preliminary phytochemical study of all extracts/fractions, HPLC-PDA polyphenolic quantification, and GC-MS analysis of the n-hexane fraction were used to identify the phytochemical makeup. Antioxidant (DPPH), enzyme inhibition (against xanthine oxidase, carbonic anhydrase, and urease enzymes), and antibacterial activities against seven bacterial strains were performed for biological investigation. The GC-MS analysis revealed the tentative identification of 22 distinct phytochemicals in the n-hexane fraction, the majority of which belonged to the phenol, flavonoid, sesquiterpenoid, terpene, fatty acid, sterol, and triterpenoid classes of secondary metabolites. HPLC-PDA analysis quantified syringic acid, 3-OH benzoic acid, t-ferullic acid, naringin, and epicatechin in a significant amount. All of the studied extracts/fractions displayed significant antioxidant capability, with methanol extract exhibiting the highest radical-scavenging activity, as measured by an inhibitory percentage of 81.4 ± 0.7 and an IC₅₀ value of 1.3 ± 0.3. For enzyme inhibition experiments, the n-hexane fraction was shown to be highly potent against xanthine oxidase and urease enzymes, with respective IC₅₀ values of 2.3 ± 0.5 and 1.1 ± 0.4 mg/mL. Similarly, the methanol extract demonstrated the strongest activity against the carbonic anhydrase enzyme, with an IC₅₀ value of 2.2 ± 0.4 mg/mL. Moreover, all the studied extracts/fractions presented moderate antibacterial potential against seven bacterial strains. Molecular docking of the five molecules β-amyrin, campesterol, ergosta-4,6,22-trien-3β-ol, stigmasterol, and caryophyllene revealed the interaction of these ligands with the investigated enzyme (xanthine oxidase). The results of the present study suggested that the N. procumbens plant may be evaluated as a possible source of bioactive compounds with multifunctional therapeutic applications. Full article

Currently, the challenges that analytical chemistry has to face are ever greater and more complex both from the point of view of the selectivity of analytical methods and their sensitivity. This is especially true in quantitative analysis, where various methods must include the development and validation of new materials, strategies, and procedures to meet the growing need for rapid, sensitive, selective, and green methods. In this context, given the International Guidelines, which over time, are updated and which set up increasingly stringent “limits”, constant innovation is required both in the pre-treatment procedures and in the instrumental configurations to obtain reliable, accurate, and reproducible information. In addition, the environmental field certainly represents the greatest challenge, as analytes are often present at trace and ultra-trace levels. These samples containing analytes at ultra-low concentration levels, therefore, require very labor-intensive sample preparation procedures and involve the high consumption of organic solvents that may not be considered “green”. In the literature, in recent years, there has been a strong development of increasingly high-performing sample preparation techniques, often “solvent-free”, as well as the development of hyphenated instrumental configurations that allow for reaching previously unimaginable levels of sensitivity. This review aims to provide an update of the most recent developments currently in use in sample pre-treatment and instrument configurations in the environmental field, also evaluating the role and future developments of analytical chemistry in light of upcoming challenges and new goals yet to be achieved. Full article