Reviewer Board
Members of the reviewer board are selected from all Polymers reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Mechanical Engineering and Engineering Science, The University of North Carolina at Charlotte, Charlotte, NC 28223, USA
Interests: biomaterials; polypropylene mesh; biocompatibility; thermal analysis; Cell Culture; in vivo tests; structure properties relationships; polymer-ceramic composites; drug delivery; hernia and vaginal imp
Interests: biomaterials; polypropylene mesh; biocompatibility; thermal analysis; Cell Culture; in vivo tests; structure properties relationships; polymer-ceramic composites; drug delivery; hernia and vaginal imp
Cornea Research Chair, Department of Optometry, College of Applied Medical Sciences, King Saud University, P.O. Box 10219, Riyadh 11433, Saudi Arabia
Interests: poly(vinyl chloride), polymer additives; photodegradation and aging of polymers; photostabilization; synthesis; characterization
Interests: poly(vinyl chloride), polymer additives; photodegradation and aging of polymers; photostabilization; synthesis; characterization
Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia
Interests: polymers; electrospinning; nanofibers; drug delivery; biologically active polymers; water treatment; fuel cells
Interests: polymers; electrospinning; nanofibers; drug delivery; biologically active polymers; water treatment; fuel cells
Campus de los Jerónimos, UCAM Universidad Católica San Antonio de Murcia, 30107 Murcia, Spain
Interests: biomaterials; collagen; chitosan; bone engineering; biocompatibility; tissue engineering; protein chemistry; cell biology; micobiology; biotechnology
Interests: biomaterials; collagen; chitosan; bone engineering; biocompatibility; tissue engineering; protein chemistry; cell biology; micobiology; biotechnology
Center for Devices and Radiological Health, Food and Drug Administration, Rockville, MA 20847, USA
Interests: molecular simulations of deformation and fracture in polymers and polymer composites; structure/property relationships, in terms of chemical structure or microstructure
Interests: molecular simulations of deformation and fracture in polymers and polymer composites; structure/property relationships, in terms of chemical structure or microstructure
Physical Electronics and Nanotechnology Research Group, Department of Science and Technology ITN, Linköping University, 58183 Linköping, Sweden
Interests: synthesis of metal oxide and mixed metal oxide; chemical sensor and solar energy conversion applications
Interests: synthesis of metal oxide and mixed metal oxide; chemical sensor and solar energy conversion applications
Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Canada
Interests: stimulus-responsive materials; polymers and composites; micro- and nanofabrication; biopolymers; polymer degradation; 2D Materials; nanotechnology; thin films; materials science
Interests: stimulus-responsive materials; polymers and composites; micro- and nanofabrication; biopolymers; polymer degradation; 2D Materials; nanotechnology; thin films; materials science
Institute for Automation and Applied Informatics, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany
Interests: additive manufacturing; functional 3D printing of polymer-based enhanced materials; Micro-Machining; laser processing; edm; process modeling and optimization
Interests: additive manufacturing; functional 3D printing of polymer-based enhanced materials; Micro-Machining; laser processing; edm; process modeling and optimization
School of Pharmacy and Pharmaceutical Sciences, Faculty of Health Sciences and Wellbeing, University of Sunderland, Sunderland SR1 3SD, UK
Interests: preparation and characterisation of stable protein and monoclonal antibody formulations; development of different tablet dosage forms to enhance; to target and to sustain the dissolution of drugs; formulation of gene therapeutics; liposomal drug delivery systems
Interests: preparation and characterisation of stable protein and monoclonal antibody formulations; development of different tablet dosage forms to enhance; to target and to sustain the dissolution of drugs; formulation of gene therapeutics; liposomal drug delivery systems
Textile Printing, Dyeing & Finishing, Damietta University, Damietta El-Gadeeda City 34511, Egypt
Interests: functionality to cellulosic pigment print; textile printing; dyeing; finishing; cellulosic; wastewater
Interests: functionality to cellulosic pigment print; textile printing; dyeing; finishing; cellulosic; wastewater
1. Chemistry Department, Faculty of Sciences, Suez University, 43533 Suez, Egypt
2. Institut für Anorganische Chemie und Strukturchemie, Heinriche-Heine-Universität Düsseldorf Universitätsstr. 1, D-40225 Düsseldorf, Germany
Interests: heterocyclic compounds; ionic liquids (ILs) and ILs-based organic compounds; nanomaterials; biopolymers; biological characterization (Antimicrobial, anticancer and antibiofouling); pharmaceutical studies; natural products
2. Institut für Anorganische Chemie und Strukturchemie, Heinriche-Heine-Universität Düsseldorf Universitätsstr. 1, D-40225 Düsseldorf, Germany
Interests: heterocyclic compounds; ionic liquids (ILs) and ILs-based organic compounds; nanomaterials; biopolymers; biological characterization (Antimicrobial, anticancer and antibiofouling); pharmaceutical studies; natural products
Departamento de Ingeniería Civil: Construcción, E.T.S de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, 28040 Madrid, Spain
Interests: concrete; fibres; concrete durabiity; Mechanical behaviour; Numerical simulation
Interests: concrete; fibres; concrete durabiity; Mechanical behaviour; Numerical simulation
Departamento de Química Orgánica, Facultad de Química, Universidad de Valencia,C/ Dr. Moliner 50, 46100 Burjassot (Valencia), Spain
Interests: organic chemistry; polymer electrolytes; ionic liquids (ILs); ionic-exchange membranes; ionic conductivity; electrochemical impedance spectroscopy (EIS); mixed-matrix membranes (MMMs); membrane–electrode assembly (MEA); protonic-exchange membrane fuel cell applications (PEMFC); fuel cell performance; direct methanol fuel cells (DMFCs); batteries; supercapacitors; composite membranes containing PEDOT; polypyrrol; graphene
Interests: organic chemistry; polymer electrolytes; ionic liquids (ILs); ionic-exchange membranes; ionic conductivity; electrochemical impedance spectroscopy (EIS); mixed-matrix membranes (MMMs); membrane–electrode assembly (MEA); protonic-exchange membrane fuel cell applications (PEMFC); fuel cell performance; direct methanol fuel cells (DMFCs); batteries; supercapacitors; composite membranes containing PEDOT; polypyrrol; graphene
Normandie Univ, UNIROUEN Normandie, INSA Rouen, CNRS, Groupe de Physique des Matériaux, 76100 Rouen, France
Interests: polymer physics; materials science
Interests: polymer physics; materials science
Department of Engineering for Innovation, University of Salento, Edificio P, Campus Ecotekne, s.p. 6 Lecce-Monteroni, 73100 Lecce, Italy
Interests: 3D printing; biopolymers; coatings; estoration
Interests: 3D printing; biopolymers; coatings; estoration
Department of Polymers and Pigments, Chemical Industries Research division, National Research Centre, Dokki, 12622 Cairo, Egypt
Interests: Synthesis of polymeric networks and resins; Surface treatment of inorganic fillers; Preparation of polymer-clay composites and nanocomposites; Rheological properties of polymer melts; Compatibilization of immiscible rubber blends; thermoplastic elastomers; biodegradable polymers; Hyperbranched and star polymers; Microencapsulation; amphiphilic block copolymers; Reverse osmosis and ultrafiltration Membranes
Interests: Synthesis of polymeric networks and resins; Surface treatment of inorganic fillers; Preparation of polymer-clay composites and nanocomposites; Rheological properties of polymer melts; Compatibilization of immiscible rubber blends; thermoplastic elastomers; biodegradable polymers; Hyperbranched and star polymers; Microencapsulation; amphiphilic block copolymers; Reverse osmosis and ultrafiltration Membranes
Laboratoire de Génie Civil et Génie Mécanique (LGCGM), Université de Rennes 1, 35238 Rennes, France
Interests: CNTs; dynamic viscosity; heat and mass transfer; nanofluids; rheology; suspensions; thermal conductivity; viscosity
Interests: CNTs; dynamic viscosity; heat and mass transfer; nanofluids; rheology; suspensions; thermal conductivity; viscosity
University of Basque Country,
M. de Lardizabal, 3
20018 Donostia-San Sebastián, Spain
Interests: poymer characterización by NMR; miscibility; transport properties
Interests: poymer characterización by NMR; miscibility; transport properties
Laboratoire de Chimie Agro-industrielle (LCA), Université de Toulouse, INRA, Toulouse INP, Toulouse, France
Interests: fiber, biorefinery; twin-screw extrusion; biopolymers; biocomposites; Molding processes
Interests: fiber, biorefinery; twin-screw extrusion; biopolymers; biocomposites; Molding processes
Military Institute of Chemistry and Radiometry, Warsaw, Poland
Interests: characterisation of polymers; adhesion; physical and chemical polymer modification; application of polymers in electronics, optics; Medicine; composite materials; recycling; energy generation
Interests: characterisation of polymers; adhesion; physical and chemical polymer modification; application of polymers in electronics, optics; Medicine; composite materials; recycling; energy generation
Facultad de Química, Universidad de la República, Montevideo 10000, Uruguay
Interests: electronic structure; nanomaterials; solar cells; Li ion batteries; thermoelectrics
Interests: electronic structure; nanomaterials; solar cells; Li ion batteries; thermoelectrics
Medicinal Chemistry, Biogen, Cambridge, MA 02142, USA
Interests: computational chemistry; machine learning; medicinal chemistry; computer-aided drug design; drug discovery; reaction mechanisms; molecular informatics; polymer chemistry; cheminformatics
Interests: computational chemistry; machine learning; medicinal chemistry; computer-aided drug design; drug discovery; reaction mechanisms; molecular informatics; polymer chemistry; cheminformatics
School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200030, China
Interests: polyimide; proton exchange membrane; gas separation membrane; polybenzimidazole; poly(ether sulfone)
Interests: polyimide; proton exchange membrane; gas separation membrane; polybenzimidazole; poly(ether sulfone)
Material Science and Engineering School, Nanjing University of Technology, Nanjing, China
Interests: shape-memory polymers; self-healing; coatings; hydrogels; Polymer Nanocomposites
Interests: shape-memory polymers; self-healing; coatings; hydrogels; Polymer Nanocomposites
School of Medical Imaging, Xuzhou Medical University, Xuzhou 221004, China
Interests: organic synthesis; fluorescent probes; live cell imaging
Interests: organic synthesis; fluorescent probes; live cell imaging
Department of Engineering, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy
Interests: wastes; recycle; PLA; LCA; lightweight aggregates; stir casting; additive manufacturing; nylon 6; vibrodyne; metallic rebars; dynamic tests; Ti6Al4V; cement composites; fractal architecture; metal matrix; MSWI fly ash
Interests: wastes; recycle; PLA; LCA; lightweight aggregates; stir casting; additive manufacturing; nylon 6; vibrodyne; metallic rebars; dynamic tests; Ti6Al4V; cement composites; fractal architecture; metal matrix; MSWI fly ash
Graduate School of Biomedical Engineering, UNSW Sydney, Sydney, NSW 2052, Australia
Interests: biomaterials; wound healing; proteoglycans; Glycosaminoglycan; heparan sulfate; chondoritin sulfate
Interests: biomaterials; wound healing; proteoglycans; Glycosaminoglycan; heparan sulfate; chondoritin sulfate
Centre for Tissue Engineering and Regenerative Research, Faculty of Medicine, 12th Floor Clinical Block, UKM Medical Centre, Jalan Yaacob Latiff, Cheras 56000, Kuala Lumpur, Malaysia
Interests: functional biomaterials; tissue engineering; 3D-bioprinting; skin tissue engineering
Interests: functional biomaterials; tissue engineering; 3D-bioprinting; skin tissue engineering
Department of Chemical Engineering, Université Laval, Quebec, QC G1V 0A6, Canada
Interests: processing of polymers; rubber compounds; Polymer recycling
Interests: processing of polymers; rubber compounds; Polymer recycling
Department of Biomedical Engineering, University of Alabama at Birmingham (UAB), Birmingham, AL 35294, USA
Interests: biomaterial enhanced regeneration; Implant design; degradable/regenrative systems
Interests: biomaterial enhanced regeneration; Implant design; degradable/regenrative systems
