Next Article in Journal
A Muscle-Driven Mechanism for Locomotion of Snake-Robots
Previous Article in Journal
Colored 3D Path Extraction Based on Depth-RGB Sensor for Welding Robot Trajectory Generation
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Finite-Time Trajectory Tracking of Second-Order Systems Using Acceleration Feedback Only †

by
Romain Delpoux
1,‡,
Thierry Floquet
2,3,*,‡ and
Hebertt Sira-Ramírez
4,‡
1
INSALyon, ECL, Université Claude Bernard Lyon 1, CNRS, Ampère, F-69621 Villeurbanne, France
2
Centre National de la Recherche Scientifique, UMR 9189, Centrale Lille, F-59000 Lille, France
3
Centre de Recherche en Informatique Signal et Automatique de Lille, UMR 9189, Centrale Lille, F-59000 Lille, France
4
Seccion de Mecatronica, Centro de Investigación y Estudios Avanzados del IPN (Cinvestav-IPN), Mexico D.F. 07300, Mexico
*
Author to whom correspondence should be addressed.
This paper is an extended version of our paper published in Delpoux, R.; Sira-Ramirez, H.; Floquet, T. Acceleration Feedback via an algebraic state estimation method. In Proceedings of the 52th IEEE Conference on Decision and Control, Firenze, Italy, 10–13 December 2013.
All the authors contributed equally to this work.
Automation 2021, 2(4), 266-277; https://doi.org/10.3390/automation2040017
Submission received: 20 July 2021 / Revised: 17 October 2021 / Accepted: 1 December 2021 / Published: 16 December 2021

Abstract

In this paper, an algebraic approach for the finite-time feedback control problem is provided for second-order systems where only the second-order derivative of the controlled variable is measured. In practice, it means that the acceleration is the only variable that can be used for feedback purposes. This problem appears in many mechanical systems such as positioning systems and force-position controllers in robotic systems and aerospace applications. Based on an algebraic approach, an on-line algebraic estimator is developed in order to estimate in finite time the unmeasured position and velocity variables. The obtained expressions depend solely on iterated integrals of the measured acceleration output and of the control input. The approach is shown to be robust to noisy measurements and it has the advantage to provide on-line finite-time (or non-asymptotic) state estimations. Based on these estimations, a quasi-homogeneous second-order sliding mode tracking control law including estimated position error integrals is designed illustrating the possibilities of finite-time acceleration feedback via algebraic state estimation.
Keywords: finite-time acceleration feedback; algebraic state estimation; sliding mode control finite-time acceleration feedback; algebraic state estimation; sliding mode control

Share and Cite

MDPI and ACS Style

Delpoux, R.; Floquet, T.; Sira-Ramírez, H. Finite-Time Trajectory Tracking of Second-Order Systems Using Acceleration Feedback Only. Automation 2021, 2, 266-277. https://doi.org/10.3390/automation2040017

AMA Style

Delpoux R, Floquet T, Sira-Ramírez H. Finite-Time Trajectory Tracking of Second-Order Systems Using Acceleration Feedback Only. Automation. 2021; 2(4):266-277. https://doi.org/10.3390/automation2040017

Chicago/Turabian Style

Delpoux, Romain, Thierry Floquet, and Hebertt Sira-Ramírez. 2021. "Finite-Time Trajectory Tracking of Second-Order Systems Using Acceleration Feedback Only" Automation 2, no. 4: 266-277. https://doi.org/10.3390/automation2040017

APA Style

Delpoux, R., Floquet, T., & Sira-Ramírez, H. (2021). Finite-Time Trajectory Tracking of Second-Order Systems Using Acceleration Feedback Only. Automation, 2(4), 266-277. https://doi.org/10.3390/automation2040017

Article Metrics

Back to TopTop