Next Article in Journal
Moisture Absorption Characteristics and Subsequent Mechanical Property Loss of Enset–PLA Composites
Next Article in Special Issue
Microstructural Evolution and Mechanical Behaviors of Cf/Cm-SiC-(ZrxHf1−x)C Composites with Different Carbon Matrices
Previous Article in Journal
Parametric Optimization of Powder-Mixed EDM of AA2014/Si3N4/Mg/Cenosphere Hybrid Composites Using Fuzzy Logic: Analysis of Mechanical, Machining, Microstructural, and Morphological Characterizations
Previous Article in Special Issue
The Effect of Lithium Doping on the Dielectric Properties of Solid Solutions LixCa(1−x)Cu3Ti4O12 (x = 0.01–0.1)
 
 

Order Article Reprints

Journal: J. Compos. Sci., 2023
Volume: 7
Number: 381

Article: Experimental and Statistical Modeling for Effect of Nozzle Diameter, Filling Pattern, and Layer Height of FDM-Printed Ceramic–Polymer Green Body on Biaxial Flexural Strength of Sintered Alumina Ceramic
Authors: by Anton Smirnov, Nikita Nikitin, Pavel Peretyagin, Roman Khmyrov, Ekaterina Kuznetsova and Nestor Washington Solis Pinargote
Link: https://www.mdpi.com/2504-477X/7/9/381

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop