Next Article in Journal
Process Optimization, Microstructure and Mechanical Properties of SiC + TiB2/AlSi10Mg Composites Fabricated by Laser-Directed Energy Deposition
Next Article in Special Issue
Ratcheting Assessment of Medium Carbon and Austenitic Steel Alloys at Elevated Temperatures
Previous Article in Journal
Technological Assurance of Surface Roughness of Ti-6Al-4V Parts Made Using Additive and Conventional Manufacturing Methods
Previous Article in Special Issue
Study on the Deformation Behavior and Mechanical Properties of Lightweight Economic Stainless Steels with Varying Al and Mn Contents
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2025, 9(12), 403; https://doi.org/10.3390/jmmp9120403
Action Date Notes Link
article html file updated 7 December 2025 12:50 CET Original file https://www.mdpi.com/2504-4494/9/12/403/html
article pdf uploaded. 7 December 2025 12:48 CET Version of Record https://www.mdpi.com/2504-4494/9/12/403/pdf
article xml uploaded. 7 December 2025 12:48 CET Update https://www.mdpi.com/2504-4494/9/12/403/xml
article xml file uploaded 7 December 2025 12:47 CET Original file -
Back to TopTop