High Internal Phase Emulsions Stabilized by Pea Protein Isolate Modified by Ultrasound Combined with pH-Shifting: Micromorphology, Rheology, and Physical Stability

In this study, the interfacial behavior of high internal phase emulsions (HIPEs), stabilized by ultrasound combined with pH-shifting modified pea protein isolate (MPPI), was investigated, and its emulsification process and stabilization mechanism were discussed. The effects of MPPI concentration on the micromorphology, droplet size, rheology, and stability of HIPEs were investigated. As the MPPI concentration increased, the appearance of HIPEs gradually changed from a relatively fluid state to a plastic solid-like state with detailed texture. There occurred a gradual decrease in droplet size, the cohering of an orderly and tight arrangement, in addition to the formation of a bilayer elastic interface layer. The macro- and microrheological assessments confirmed that the apparent viscosity, storage modulus, elasticity index, and macroscopic viscosity index increased gradually. Furthermore, it was demonstrated that 5 wt% MPPI-stabilized HIPEs had the potential to be used as 3D printing inks. Stability evaluation showed that the TURBISCAN stability index decreased and centrifugal stability increased. The appearance and microstructure remained highly stable after heating at 80 °C for 30 min and storage at 4 ℃ for 90 days. These findings confirm that MPPI improves the rheological behavior and stability of HIPEs by modulating the interfacial adsorption and network structure.