In the original publication [1], there was a mistake in Figure 4 (The rain erosion tester at Offshore Renewable Energy Catapult, U.K) as published. The original image used in Figure 4 may be considered unauthorized for publication and has therefore been replaced with an authorized image of the rain erosion tester used within the described research. The corrected Figure 4 appears below.
Figure 4.
The rain erosion tester (R&D A/S, Hinnerup, Denmark) at Offshore Renewable Energy Catapult, U.K (Source: Offshore Renewable Energy Catapult).
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Jones, S.M.; Rehfeld, N.; Schreiner, C.; Dyer, K. The Development of a Novel Thin Film Test Method to Evaluate the Rain Erosion Resistance of Polyaspartate-Based Leading Edge Protection Coatings. Coatings 2023, 13, 1849. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).