The authors have found three typing errors in their published paper and would like to make corrections in this paper [1].
There was typing error from the author’s side during the review phase:
- 1.
- Section 3, Page number: 9, paragraph: 2, line: 1
The short form of change in surface roughness was written incorrectly as ∆Ra. This should be replaced with ∆Sa.
- 2.
- Section 3, Page number: 9, Table 4: Title
The short form of change in surface roughness was written incorrectly as ∆Ra. This should be replaced with ∆Sa.
- 3.
- Section 3, Page number: 9, Table 4: Column 1
The short form of change in surface roughness was written incorrectly as ∆Ra. This should be replaced with ∆Sa.
The rest of the paper and tables do not need to be changed. The changes do not affect the scientific results. The authors would like to apologize for any inconvenience caused to the readers by these changes.
Reference
- Jain, S.; Sayed, M.; Ahmed, W.M.; Halawi, A.H.A.; Najmi, N.M.A.; Aggarwal, A.; Bhandi, S.; Patil, S. An In-Vitro Study to Evaluate the Effect of Denture Cleansing Agents on Color Stability of Denture Bases Fabricated Using CAD/CAM Milling, 3D-Printing and Conventional Techniques. Coatings 2021, 11, 962. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).