Next Article in Journal
Control Points Selection Based on Maximum External Reliability for Designing Geodetic Networks
Next Article in Special Issue
Design Model of Flow Lines to Include Switch-Off Policies Reducing Energy Consumption
Previous Article in Journal
Impact Damage Resistance and Post-Impact Tolerance of Optimum Banana-Pseudo-Stem-Fiber-Reinforced Epoxy Sandwich Structures
Previous Article in Special Issue
Statistical Analysis and Data Envelopment Analysis to Improve the Efficiency of Manufacturing Process of Electrical Conductors
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 10
Issue 2
10.3390/app10020686
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

In-Line Target Production for Laser IFE

by
Irina Aleksandrova
,
Eugeniy Koshelev
and
Elena Koresheva
*
P.N. Lebedev Physical Institute of the Russian Academy of Sciences, 119991 Moscow, Russia
*
Author to whom correspondence should be addressed.
Appl. Sci. 2020, 10(2), 686; https://doi.org/10.3390/app10020686
Submission received: 25 December 2019 / Revised: 13 January 2020 / Accepted: 15 January 2020 / Published: 18 January 2020
(This article belongs to the Special Issue Design and Optimization of Production Lines)
Browse Figures
Review Reports Versions Notes

Abstract

The paper presents the results of mathematical and experimental modeling of in-line production of inertial fusion energy (IFE) targets of a reactor-scaled design. The technical approach is the free-standing target (FST) layering method in line-moving spherical shells. This includes each step of the fabrication and injection processes in the FST transmission line (FST-TL) considered as a potential solution of the problem of mass target manufacturing. Finely, we discuss the development strategy of the FST-TL creation seeking to develop commercial power production based on laser IFE.
Keywords: inertial fusion energy; free-standing target layering; FST transmission line inertial fusion energy; free-standing target layering; FST transmission line

Share and Cite

MDPI and ACS Style

Aleksandrova, I.; Koshelev, E.; Koresheva, E. In-Line Target Production for Laser IFE. Appl. Sci. 2020, 10, 686. https://doi.org/10.3390/app10020686

AMA Style

Aleksandrova I, Koshelev E, Koresheva E. In-Line Target Production for Laser IFE. Applied Sciences. 2020; 10(2):686. https://doi.org/10.3390/app10020686

Chicago/Turabian Style

Aleksandrova, Irina, Eugeniy Koshelev, and Elena Koresheva. 2020. "In-Line Target Production for Laser IFE" Applied Sciences 10, no. 2: 686. https://doi.org/10.3390/app10020686

APA Style

Aleksandrova, I., Koshelev, E., & Koresheva, E. (2020). In-Line Target Production for Laser IFE. Applied Sciences, 10(2), 686. https://doi.org/10.3390/app10020686

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop