Order Article Reprints

Gonzalez Duran JEE, González-Rodríguez OJ, Zamora-Antuñano MA, Rodríguez-Reséndiz J, Méndez-Lozano N, Gómez Meléndez DJ, García García R. Finite Element Method and Cut Bar Method-Based Comparison Under 150°, 175° and 310 °C for an Aluminium Bar. Applied Sciences. 2020; 10(1):296. https://doi.org/10.3390/app10010296

Gonzalez Duran, José Eli Eduardo, Oscar J. González-Rodríguez, Marco Antonio Zamora-Antuñano, Juvenal Rodríguez-Reséndiz, Néstor Méndez-Lozano, Domingo José Gómez Meléndez, and Raul García García. 2020. "Finite Element Method and Cut Bar Method-Based Comparison Under 150°, 175° and 310 °C for an Aluminium Bar" Applied Sciences 10, no. 1: 296. https://doi.org/10.3390/app10010296

Gonzalez Duran, J. E. E., González-Rodríguez, O. J., Zamora-Antuñano, M. A., Rodríguez-Reséndiz, J., Méndez-Lozano, N., Gómez Meléndez, D. J., & García García, R. (2020). Finite Element Method and Cut Bar Method-Based Comparison Under 150°, 175° and 310 °C for an Aluminium Bar. Applied Sciences, 10(1), 296. https://doi.org/10.3390/app10010296