Metals Powders: Synthesis and Processing
Department of Chemical Engineering, Physical Chemistry and Materials Science, Escuela Técnica Superior de Ingeniería, Universidad de Huelva, Campus El Carmen, Avda. Tres de marzo s/n, 21071 Huelva, Spain
Metals 2019, 9(12), 1358; https://doi.org/10.3390/met9121358
Submission received: 12 December 2019
/
Accepted: 15 December 2019
/
Published: 17 December 2019
(This article belongs to the Special Issue Metals Powders: Synthesis and Processing)
Excerpt
Note: In lieu of an abstract, this is an excerpt from the first page.
Metallic parts can be obtained by a wide variety of techniques [...]
Share and Cite
MDPI and ACS Style
Gómez Cuevas, F.P. Metals Powders: Synthesis and Processing. Metals 2019, 9, 1358. https://doi.org/10.3390/met9121358
AMA Style
Gómez Cuevas FP. Metals Powders: Synthesis and Processing. Metals. 2019; 9(12):1358. https://doi.org/10.3390/met9121358
Chicago/Turabian StyleGómez Cuevas, Francisco Paula. 2019. "Metals Powders: Synthesis and Processing" Metals 9, no. 12: 1358. https://doi.org/10.3390/met9121358
APA StyleGómez Cuevas, F. P. (2019). Metals Powders: Synthesis and Processing. Metals, 9(12), 1358. https://doi.org/10.3390/met9121358
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.
