Moritz, J.; Götze, P.; Schiefer, T.; Stepien, L.; Klotzbach, A.; Standfuß, J.; López, E.; Brückner, F.; Leyens, C.
Additive Manufacturing of Titanium with Different Surface Structures for Adhesive Bonding and Thermal Direct Joining with Fiber-Reinforced Polyether-Ether-Ketone (PEEK) for Lightweight Design Applications. Metals 2021, 11, 265.
https://doi.org/10.3390/met11020265
AMA Style
Moritz J, Götze P, Schiefer T, Stepien L, Klotzbach A, Standfuß J, López E, Brückner F, Leyens C.
Additive Manufacturing of Titanium with Different Surface Structures for Adhesive Bonding and Thermal Direct Joining with Fiber-Reinforced Polyether-Ether-Ketone (PEEK) for Lightweight Design Applications. Metals. 2021; 11(2):265.
https://doi.org/10.3390/met11020265
Chicago/Turabian Style
Moritz, Juliane, Philipp Götze, Tom Schiefer, Lukas Stepien, Annett Klotzbach, Jens Standfuß, Elena López, Frank Brückner, and Christoph Leyens.
2021. "Additive Manufacturing of Titanium with Different Surface Structures for Adhesive Bonding and Thermal Direct Joining with Fiber-Reinforced Polyether-Ether-Ketone (PEEK) for Lightweight Design Applications" Metals 11, no. 2: 265.
https://doi.org/10.3390/met11020265
APA Style
Moritz, J., Götze, P., Schiefer, T., Stepien, L., Klotzbach, A., Standfuß, J., López, E., Brückner, F., & Leyens, C.
(2021). Additive Manufacturing of Titanium with Different Surface Structures for Adhesive Bonding and Thermal Direct Joining with Fiber-Reinforced Polyether-Ether-Ketone (PEEK) for Lightweight Design Applications. Metals, 11(2), 265.
https://doi.org/10.3390/met11020265
