Next Article in Journal
Induction Weld Seam Characterization of Continuously Roll Formed TRIP690 Tubes
Previous Article in Journal
Mechanism of Calcium Sulphate on the Aggregation and Growth of Ferronickel Particles in the Self-Reduction of Saprolitic Nickel Laterite Ore
Open AccessArticle

Experimental Determination of the Resistivity Limits for Platinum and Iron Metal Gases Using an Exploding Wire

1
Departamento de Física, Facultad de Ciencias Exactas, Universidad de Buenos Aires, 1482 Buenos Aires, Argentina
2
INFIP, CONICET, 1414 Buenos Aires, Argentina
3
INEI, University of Castilla-la Mancha, 37001 C. Real, Spain
*
Author to whom correspondence should be addressed.
Metals 2020, 10(4), 424; https://doi.org/10.3390/met10040424
Received: 3 February 2020 / Revised: 19 March 2020 / Accepted: 20 March 2020 / Published: 25 March 2020
Transport properties of metals in solid, liquid, gas or plasma phases are an open area of research, both theoretically and experimentally. Concretely, there are no measurements available for the resistivity of gas phase of metals. In the latter case, the use of exploding wire systems allows one to reach states from solid to plasma that are not accessible with other experimental methods. In this work, following a measurement method previously used with copper, experimental resistivity limits of iron and platinum metal gases are presented based on measurements performed on the metal gas expansion phase. View Full-Text
Keywords: exploding wire; iron; platinum; metal gas resistivity; transport properties exploding wire; iron; platinum; metal gas resistivity; transport properties
Show Figures

Figure 1

MDPI and ACS Style

Bilbao, L.; Rodríguez Prieto, G. Experimental Determination of the Resistivity Limits for Platinum and Iron Metal Gases Using an Exploding Wire. Metals 2020, 10, 424.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop