Demski, N.M.; Seidlitz, H.; Kuke, F.; Dorn, O.N.; Zoglauer, J.; Hückstaedt, T.; Kamm, P.H.; GarcÃa-Moreno, F.; Kremp, N.; Dreyer, C.;
et al. Flow-Line-Reducing Tetrahedral Metal Effect Pigments for Injection Molding: A Yield-Rate-Improved Particle Manufacturing Method Based on Soft UVImprint Lithography. Polymers 2025, 17, 2708.
https://doi.org/10.3390/polym17192708
AMA Style
Demski NM, Seidlitz H, Kuke F, Dorn ON, Zoglauer J, Hückstaedt T, Kamm PH, GarcÃa-Moreno F, Kremp N, Dreyer C,
et al. Flow-Line-Reducing Tetrahedral Metal Effect Pigments for Injection Molding: A Yield-Rate-Improved Particle Manufacturing Method Based on Soft UVImprint Lithography. Polymers. 2025; 17(19):2708.
https://doi.org/10.3390/polym17192708
Chicago/Turabian Style
Demski, Nils Maximilian, Holger Seidlitz, Felix Kuke, Oliver Niklas Dorn, Janina Zoglauer, Tobias Hückstaedt, Paul Hans Kamm, Francisco GarcÃa-Moreno, Noah Kremp, Christian Dreyer,
and et al. 2025. "Flow-Line-Reducing Tetrahedral Metal Effect Pigments for Injection Molding: A Yield-Rate-Improved Particle Manufacturing Method Based on Soft UVImprint Lithography" Polymers 17, no. 19: 2708.
https://doi.org/10.3390/polym17192708
APA Style
Demski, N. M., Seidlitz, H., Kuke, F., Dorn, O. N., Zoglauer, J., Hückstaedt, T., Kamm, P. H., GarcÃa-Moreno, F., Kremp, N., Dreyer, C., & Oberschmidt, D.
(2025). Flow-Line-Reducing Tetrahedral Metal Effect Pigments for Injection Molding: A Yield-Rate-Improved Particle Manufacturing Method Based on Soft UVImprint Lithography. Polymers, 17(19), 2708.
https://doi.org/10.3390/polym17192708
