Next Article in Journal
Design and Optimization of NR-Based Stretchable Conductive Composites Filled with MoSi2 Nanoparticles and MWCNTs: Perspectives from Experimental Characterization and Molecular Dynamics Simulations
Next Article in Special Issue
Thermo-Mechanical Behavior and Strain Rate Sensitivity of 3D-Printed Polylactic Acid (PLA) below Glass Transition Temperature (Tg)
Previous Article in Journal
Study on Nutrient Carrier of Mulch Based on Hydrogel @SiO2
Previous Article in Special Issue
The Use of Additive Manufacturing Techniques in the Development of Polymeric Molds: A Review
 
 

Order Article Reprints

Journal: Polymers, 2024
Volume: 16
Number: 1443

Article: Selection and Optimization of Carbon-Reinforced Polyether Ether Ketone Process Parameters in 3D Printing—A Rotating Component Application
Authors: by Raja Subramani, Praveenkumar Vijayakumar, Maher Ali Rusho, Anil Kumar, Karthik Venkitaraman Shankar and Arun Kumar Thirugnanasambandam
Link: https://www.mdpi.com/2073-4360/16/10/1443

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop