Rojas-Rueda, S.; Alsahafi, T.A.; Hammamy, M.; Surathu, N.; Surathu, N.; Lawson, N.C.; Sulaiman, T.A.
Roughness and Gloss of 3D-Printed Crowns Following Polishing or Varnish Application. Materials 2025, 18, 3308.
https://doi.org/10.3390/ma18143308
AMA Style
Rojas-Rueda S, Alsahafi TA, Hammamy M, Surathu N, Surathu N, Lawson NC, Sulaiman TA.
Roughness and Gloss of 3D-Printed Crowns Following Polishing or Varnish Application. Materials. 2025; 18(14):3308.
https://doi.org/10.3390/ma18143308
Chicago/Turabian Style
Rojas-Rueda, Silvia, Tariq Aziz Alsahafi, Mohammed Hammamy, Neeraj Surathu, Nitish Surathu, Nathaniel C. Lawson, and Taiseer A. Sulaiman.
2025. "Roughness and Gloss of 3D-Printed Crowns Following Polishing or Varnish Application" Materials 18, no. 14: 3308.
https://doi.org/10.3390/ma18143308
APA Style
Rojas-Rueda, S., Alsahafi, T. A., Hammamy, M., Surathu, N., Surathu, N., Lawson, N. C., & Sulaiman, T. A.
(2025). Roughness and Gloss of 3D-Printed Crowns Following Polishing or Varnish Application. Materials, 18(14), 3308.
https://doi.org/10.3390/ma18143308
