Next Article in Journal
Adaptive Machining Method for Helical Milling of Carbon Fiber-Reinforced Plastic/Titanium Alloy Stacks Based on Interface Identification
Next Article in Special Issue
Microhardness and Microstructure Analysis of the LPBF Additively Manufactured 18Ni300
Previous Article in Journal
Development of Thermodynamic Criteria for Determining the Composition of Duplex Stainless Steels with High Corrosion Resistance
Previous Article in Special Issue
Evaluation of the Depth and Width of Cuts after Controlled-Depth Abrasive Water Jet Machining Using Low Pressure
 
 

Order Article Reprints

Journal: Materials, 2024
Volume: 17
Number: 295

Article: Evaluation of the Surface Topography and Deformation of Vertical Thin-Wall Milled Samples from the Nickel Alloy Inconel 625
Authors: by Szymon Kurpiel, Krzysztof Zagórski, Jacek Cieślik, Krzysztof Skrzypkowski and Amandyk Tuleshov
Link: https://www.mdpi.com/1996-1944/17/2/295

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop