Next Article in Journal
Numerical and Experimental Study on the Performance of Thermoelectric Radiant Panel for Space Heating
Next Article in Special Issue
Numerical Simulation of the Rheological Behavior of Nanoparticulate Suspensions
Previous Article in Journal
Research Progress on Applications of Polyaniline (PANI) for Electrochemical Energy Storage and Conversion
Previous Article in Special Issue
Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 13
Issue 3
10.3390/ma13030549
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Extrusion of Polymer Nanocomposites with Graphene and Graphene Derivative Nanofillers: An Overview of Recent Developments

by
José Sanes
*,
Cristian Sánchez
,
Ramón Pamies
,
María-Dolores Avilés
and
María-Dolores Bermúdez
Grupo de Ciencia de Materiales e Ingeniería Metalúrgica, Campus de la Muralla del Mar., Universidad Politécnica de Cartagena, 30202 Cartagena, Spain
*
Author to whom correspondence should be addressed.
Materials 2020, 13(3), 549; https://doi.org/10.3390/ma13030549
Submission received: 29 November 2019 / Revised: 14 January 2020 / Accepted: 21 January 2020 / Published: 23 January 2020
(This article belongs to the Special Issue Polymer Rheology and Processing of Nano- and Micro-Composites)
Browse Figures
Versions Notes

Abstract

This review is focused on the recent developments of nanocomposite materials that combine a thermoplastic matrix with different forms of graphene or graphene oxide nanofillers. In all cases, the manufacturing method of the composite materials has been melt-processing, in particular, twin-screw extrusion, which can then be followed by injection molding. The advantages of this processing route with respect to other alternative methods will be highlighted. The results point to an increasing interest in biodegradable matrices such as polylactic acid (PLA) and graphene oxide or reduced graphene oxide, rather than graphene. The reasons for this will also be discussed.
Keywords: thermoplastics; graphene; graphene oxide; extrusion; nanocomposites thermoplastics; graphene; graphene oxide; extrusion; nanocomposites

Share and Cite

MDPI and ACS Style

Sanes, J.; Sánchez, C.; Pamies, R.; Avilés, M.-D.; Bermúdez, M.-D. Extrusion of Polymer Nanocomposites with Graphene and Graphene Derivative Nanofillers: An Overview of Recent Developments. Materials 2020, 13, 549. https://doi.org/10.3390/ma13030549

AMA Style

Sanes J, Sánchez C, Pamies R, Avilés M-D, Bermúdez M-D. Extrusion of Polymer Nanocomposites with Graphene and Graphene Derivative Nanofillers: An Overview of Recent Developments. Materials. 2020; 13(3):549. https://doi.org/10.3390/ma13030549

Chicago/Turabian Style

Sanes, José, Cristian Sánchez, Ramón Pamies, María-Dolores Avilés, and María-Dolores Bermúdez. 2020. "Extrusion of Polymer Nanocomposites with Graphene and Graphene Derivative Nanofillers: An Overview of Recent Developments" Materials 13, no. 3: 549. https://doi.org/10.3390/ma13030549

APA Style

Sanes, J., Sánchez, C., Pamies, R., Avilés, M.-D., & Bermúdez, M.-D. (2020). Extrusion of Polymer Nanocomposites with Graphene and Graphene Derivative Nanofillers: An Overview of Recent Developments. Materials, 13(3), 549. https://doi.org/10.3390/ma13030549

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop