Next Article in Journal
A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process
Next Article in Special Issue
Silk as a Natural Reinforcement: Processing and Properties of Silk/Epoxy Composite Laminates
Previous Article in Journal
Retained Austenite Decomposition and Carbide Precipitation during Isothermal Tempering of a Medium-Carbon Low-Alloy Bainitic Steel
Previous Article in Special Issue
Preparation Nano-Structure Polytetrafluoroethylene (PTFE) Functional Film on the Cellulose Insulation Polymer and Its Effect on the Breakdown Voltage and Hydrophobicity Properties
 
 

Order Article Reprints

Journal: Materials, 2018
Volume: 11
Number: 1442

Article: Replication of Micro- and Nanofeatures in Injection Molding of Two PLA Grades with Rapid Surface-Temperature Modulation
Authors: by Sara Liparoti, Vito Speranza and Roberto Pantani
Link: https://www.mdpi.com/1996-1944/11/8/1442

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop