Next Article in Journal
Hydrostatic High-Pressure Post-Processing of Specimens Fabricated by DLP, SLA, and FDM: An Alternative for the Sterilization of Polymer-Based Biomedical Devices
Next Article in Special Issue
Low-Melting Manganese(II)-Based Ionic Liquids: Syntheses, Structures, Properties and Influence of Trace Impurities
Previous Article in Journal
Incorporating Liquid Crystal Display (LCD) Glass Waste as Supplementary Cementing Material (SCM) in Cement Mortars—Rationale Based on Hydration, Durability, and Pore Characteristics
 
 
Article

Article Versions Notes

Materials 2018, 11(12), 2539; https://doi.org/10.3390/ma11122539
Action Date Notes Link
article xml file uploaded 13 December 2018 11:40 CET Original file -
article xml uploaded. 13 December 2018 11:40 CET Update https://www.mdpi.com/1996-1944/11/12/2539/xml
article pdf uploaded. 13 December 2018 11:40 CET Version of Record https://www.mdpi.com/1996-1944/11/12/2539/pdf
article supplementary file uploaded. 13 December 2018 11:40 CET - https://www.mdpi.com/1996-1944/11/12/2539#supplementary
article html file updated 13 December 2018 11:41 CET Original file -
article html file updated 26 December 2018 20:01 CET Update -
article html file updated 2 April 2019 12:47 CEST Update -
article html file updated 13 April 2019 15:41 CEST Update -
article html file updated 27 April 2019 19:48 CEST Update -
article html file updated 11 October 2019 22:04 CEST Update -
article html file updated 11 February 2020 03:00 CET Update -
article html file updated 17 July 2022 15:30 CEST Update https://www.mdpi.com/1996-1944/11/12/2539/html
Back to TopTop