Models of Transverse Vibration in Conveyor Belt—Investigation and Analysis
Abstract
:1. Introduction
2. Materials and Methods
2.1. Theory and Tests of Conveyor Belt Transverse Vibrations
2.2. Equipment and Methodology
3. Results
4. Discussion
5. Conclusions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Conflicts of Interest
References
- Suweken, G.; Van Horssen, W.T. On the transversal vibrations of a conveyor belt with a low and time-varying velocity. Part I: The string-like case. J. Sound Vib. 2003, 264, 117–133. [Google Scholar] [CrossRef] [Green Version]
- Gladysiewicz, L. Belt Conveyors: Theory and Calculations; Oficyna Wydawnicza Politechniki Wrocławskiej: Wrocław, Poland, 2003; ISBN 83-7085-737-X. [Google Scholar]
- Harrison, A. Dynamic behaviour of steel-cord belts. Colliery Guard. 1981, 229, 459–460. [Google Scholar]
- For, O.; Publications, O.; The, O.F.; Communities, E. Position Paper on Guidelines for the Application of the European Parliament and Council Directive 2000 / 14 / EC on the Approximation of the Laws of the Member States Relating to the Noise Emission in the Environment by Equipment for; 2000; Volume 162, pp. 1–78. [Google Scholar]
- Union, E. Directive 2006/40/EC of the European parliament and of the Council of 17 May 2006, Official J. Eur. Union L 161 (12). Off. J. Eur. Union 2006, L161, 12–18. [Google Scholar]
- Malinauskaite, J.; Jouhara, H.; Ahmad, L.; Milani, M.; Montorsi, L.; Venturelli, M. Energy efficiency in industry: EU and national policies in Italy and the UK. Energy 2019, 172, 255–269. [Google Scholar] [CrossRef]
- Gładysiewicz, A. Measures of belt conveyor’s noise reduction. Transp. Przem. i Masz. Rob. 2010, 3, 56–63. [Google Scholar]
- Idczak, H.; Rudno-Rudzinska, B.; Mazurek, C. [Politechnika W. (Poland)] Reducing noise pollution from belt conveyors in surface mines. Gor. Odkryw. 1989, 31, 54–69. [Google Scholar]
- Sadowski, J.; Fąs, T. Noise minimization of belt conveyor used for lignite coal transportation. Chem. Eng. Equip. 2014, 113–115. [Google Scholar]
- Manwar, V.D.; Mandal, B.B.; Pal, A.K. Environmental propagation of noise in mines and nearby villages: A study through noise mapping. Noise Health 2016, 18, 185–193. [Google Scholar] [CrossRef] [PubMed]
- Wickert, J.A.; Mote, C.D. Linear transverse vibration of an axially moving string-particle system. J. Acoust. Soc. Am. 1988, 84, 963–969. [Google Scholar] [CrossRef]
- Pellicano, F.; Vestroni, F. Nonlinear dynamics and bifurcations of an axially moving beam. J. Vib. Acoust. Trans. ASME 2000, 122, 21–30. [Google Scholar] [CrossRef]
- Harrison, A. Determination of the natural frequencies of transverse vibration for conveyor belts with orthotropic properties. J. Sound Vib. 1986, 110, 483–493. [Google Scholar] [CrossRef]
- Lodewijks, G. Dynamics of Belt Systems, TU Delft; Delft University of Technology: Delft, The Netherlands, 1996. [Google Scholar]
- Suweken, G.; Van Horssen, W.T. On the transversal vibrations of a conveyor belt with a low and time-varying velocity. Part II: The beam-like case. J. Sound Vib. 2003, 267, 1007–1027. [Google Scholar] [CrossRef]
- Andrianov, I.V.; van Horssen, W.T. On the transversal vibrations of a conveyor belt: Applicability of simplified models. J. Sound Vib. 2008, 313, 822–829. [Google Scholar] [CrossRef]
- Ding, H.; Li, D.-P. Static and dynamic behaviors of belt-drive dynamic systems with a one-way clutch. Nonlinear Dyn. 2014, 78, 1553–1575. [Google Scholar] [CrossRef]
- HOU, Y.F.; MENG, Q.R. Dynamic characteristics of conveyor belts. J. China Univ. Min. Technol. 2008, 18, 629–633. [Google Scholar] [CrossRef]
- Abrate, S. Vibrations of belts and belt drives. Mech. Mach. Theory 1992, 27, 645–659. [Google Scholar] [CrossRef]
- Kulinowski, P.; Kasza, P.; Zarzycki, J. The Analysis of Effectiveness of Conveyor Belt Tensioning Systems. New Trends Prod. Eng. 2020, 3, 283–293. [Google Scholar] [CrossRef]
- Manjgo, M.; Piric, E.; Vuherer, T.; Burzic, M. Materials-the Rubber Conveyor Belt With Cartridges Made of Polyester and Polyamide. In Proceedings of the Annals of Faculty Engineering Hunedoara—International Journal of Engineering, Hunedoara, Romania, 2018; pp. 141–145. Available online: http://annals.fih.upt.ro/pdf-full/2018/ANNALS-2018-1-22.pdf (accessed on 1 July 2021).
- Tokoro, H.; Nakamura, M.; Sugiura, N.; Tani, H.; Yamamoto, K.I.; Shuku, T. Analysis of transverse vibration in engine timing belt. JSAE Rev. 1997, 18, 33–38. [Google Scholar] [CrossRef]
- Ding, H.; Zu, J.W. Effect of one-way clutch on the nonlinear vibration of belt-drive systems with a continuous belt model. J. Sound Vib. 2013, 332, 6472–6487. [Google Scholar] [CrossRef]
- Beikmann, R.S.; Perkins, N.C.; Ulsoy, A.G. Free vibration of serpentine belt drive systems. J. Vib. Acoust. Trans. ASME 1996, 118, 406–413. [Google Scholar] [CrossRef]
- Scurtu, P.R.; Clark, M.; Zu, J.W. Coupled longitudinal and transverse vibration of automotive belts under longitudinal excitations using analog equation method. JVC J. Vib. Control 2012, 18, 1336–1352. [Google Scholar] [CrossRef]
- Moon, J.; Wickert, J.A. Non-linear vibration of power transmission belts. J. Sound Vib. 1997, 200, 419–431. [Google Scholar] [CrossRef]
- Hedrih, K. Transversal vibrations of the axially moving sandwich double belt system with creep layer. IFAC Proc. Vol. 2006, 39, 167–172. [Google Scholar] [CrossRef]
- Kim, S.K.; Lee, J.M. Analysis of the non-linear vibration characteristics of a belt-driven system. J. Sound Vib. 1999, 223, 723–740. [Google Scholar] [CrossRef]
- Pukach, P.; Sokhan, P.; Stolyarchuk, R. Investigation of mathematical models for vibrations of one dimensional environments with considering nonlinear resistance forces. ECONTECHMOD An Int. Q. J. Econ. Technol. Model. Process. 2016, 5, 97–102. [Google Scholar]
- Nikolaevna Aleksandrova, T. Interaction of lunch ore with conveyor belt. The original in Russian: “Взаимoдействие кускoвoй руды с лентoй кoнвейера”. Eastern-European J. Enterp. Technol. 2008, 35, 48–52. [Google Scholar]
- Pihnastyi, O.; Khodusov, V.; Kozhevnikov, G.; Bondarenko, T. Analysis of Dynamic Mechanic Belt Stresses of the Magistral Conveyor. In Proceedings of the Grabchenko’s International Conference on Advanced Manufacturing Processes; Springer: Cham, Switzerland, 2021; pp. 186–195. [Google Scholar]
- Lodewijks, G. Two Decades Dynamics of Belt Conveyor Systems. 2007. Available online: https://login.totalweblite.com/Clients/doublearrow/beltcon%202001/1.two%20decades%20dynamics%20of%20belt%20conveyor%20systems.pdf (accessed on 1 July 2021).
- Harrison, A. Criteria for minimising transient stress in conveyor. Trans. Inst. Eng., Aust., Mech. Eng. 1983, ME8, 129–134. [Google Scholar]
- Kong, L.; Parker, R.G. Coupled belt-pulley vibration in serpentine drives with belt bending stiffness. J. Appl. Mech. Trans. ASME 2004, 71, 109–119. [Google Scholar] [CrossRef]
- Ravindra, V.; Padmanabhan, C.; Sujatha, C. Static and free vibration studies on a pulley-belt system with ground stiffness. J. Brazilian Soc. Mech. Sci. Eng. 2010, 32, 61–70. [Google Scholar] [CrossRef] [Green Version]
- Hop, T. Vibrations of compressed beams. The original in Polish: “Drgania belek sprężonych,” Politechnika Śląska. 1962. Available online: http://delibra.bg.polsl.pl/Content/2513/Hop.pdf (accessed on 1 July 2021).
- American Society of Mechanical Engineers. Design Engineering Div. Power Transmission and Gearing. In Proceedings of the 1989 International Power Transmission and Gearing Conference, Chicago, IL, USA, 25–28 April 1989; pp. 25–29. [Google Scholar]
- Wasfy, T.M.; Leamy, M. Effect of bending stiffness on the dynamic and steady-state responses of belt-drives. In Proceedings of the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, QB, Canada, 1 January 2002; Volume 36533, pp. 217–224. [Google Scholar]
- Callegari, M.; Cannella, F.; Ferri, G. Multi-body modelling of timing belt dynamics. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 2003, 217, 63–75. [Google Scholar] [CrossRef]
- Ulsoy, A.G.; Whitesell, J.E.; Hooven, M.D. Design of belt-tensioner systems for dynamic stability. J. Vib. Acoust. Trans. ASME 1985, 107, 282–290. [Google Scholar] [CrossRef]
- Hu, Y.; Yan, Y.; Wang, L.; Qian, X. Non-Contact Vibration Monitoring of Power Transmission Belts Through Electrostatic Sensing. IEEE Sens. J. 2016, 16, 3541–3550. [Google Scholar] [CrossRef]
- Ma, X.; Shi, X.; Zhang, J. Modeling and experimental investigation on the vibration of main drive chain in escalator. In Proceedings of the INTER-NOISE 2019 MADRID—48th International Congress and Exhibition on Noise Control Engineering, InterNoise19, Madrid, Spain, 17–19 June 2019; Institute of Noise Control Engineering: Indianapolis, IN, USA, 2019. Volume 259. pp. 2069–2080. [Google Scholar]
- Bortnowski, P.; Gladysiewicz, L.; Krol, R.; Ozdoba, M. Tests of belt linear speed for identification of frictional contact phenomena. Sensors 2020, 20, 5816. [Google Scholar] [CrossRef] [PubMed]
- Gładysiewicz, L.; Kawalec, W.; Król, R. Selection of carry idlers spacing of belt conveyor taking into account random stream of transported bulk material. Maint. Reliab. 2016, 18, 32–37. [Google Scholar] [CrossRef]
Width B (m) | 0.435 |
Loop length Lt (m) | 11.78 |
Tensile strength Kn (kN/m) | 800 |
Core type | steel |
Thickness ht (m) | 0.018 |
Flexural rigidity EJ (Nm2) | 4.49 |
Mass mt (kg/m2) | 23.3 |
Idler Spacing L [m] | Method | Tension Force T (kN) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
20 | 30 | 40 | 50 | 60 | ||||||||
2.4 | Measurement (Hz) | 28.6 | 32.4 | 47.1 | 50.1 | 58.8 | ||||||
MAE (Hz)/(%) | String (4) | 0.4 | 1.5% | 3.1 | 9.7% | 6.0 | 12.8% | 4.2 | 8.3% | 8.5 | 14.4% | |
Beam (8) | 19.4 | 67.7% | 21.1 | 65.1% | 34.0 | 72.2% | 35.5 | 70.8% | 42.8 | 72.8% | ||
2.0 | Measurement (Hz) | 33.1 | 35.9 | 44.4 | 47.0 | 51.0 | ||||||
MAE (Hz)/(%) | String (4) | 1.8 | 5.3% | 6.8 | 19.0% | 4.9 | 11.0% | 8.1 | 17.3% | 9.4 | 18.4% | |
Beam (8) | 22.0 | 66.5% | 22.3 | 62.1% | 28.7 | 64.7% | 29.4 | 62.7% | 31.8 | 62.3% | ||
1.6 | Measurement (Hz) | 20.0 | 28.8 | 44.6 | 50.0 | 59.6 | ||||||
MAE (Hz)/(%) | String (4) | 23.6 | 118.1% | 24.6 | 85.3% | 17.1 | 38.3% | 18.9 | 37.7% | 15.9 | 26.6% | |
Beam (8) | 6.1 | 30.6% | 11.8 | 41.0% | 24.9 | 56.0% | 28.1 | 56.1% | 35.6 | 59.7% | ||
1.2 | Measurement (Hz) | 14.4 | 19.9 | 28.8 | 36.8 | 38.7 | ||||||
MAE (Hz)/(%) | String (4) | 43.7 | 303.2% | 51.2 | 257.0% | 53.3 | 185.0% | 55.1 | 149.7% | 62.0 | 160.3% | |
Beam (8) | 4.1 | 28.4% | 2.7 | 13.7% | 2.7 | 9.2% | 7.5 | 20.5% | 6.6 | 17.1% | ||
0.8 | Measurement (Hz) | 18.4 | 22.1 | 30.4 | 36.8 | 39.9 | ||||||
MAE (Hz)/(%) | String (4) | 68.7 | 372.6% | 84.6 | 383.5% | 92.9 | 305.9% | 101.0 | 274.5% | 111.1 | 278.4% | |
Beam (8) | 9.3 | 50.7% | 11.9 | 54.1% | 8.9 | 29.3% | 7.1 | 19.3% | 8.2 | 20.5% |
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Bortnowski, P.; Gładysiewicz, L.; Król, R.; Ozdoba, M. Models of Transverse Vibration in Conveyor Belt—Investigation and Analysis. Energies 2021, 14, 4153. https://doi.org/10.3390/en14144153
Bortnowski P, Gładysiewicz L, Król R, Ozdoba M. Models of Transverse Vibration in Conveyor Belt—Investigation and Analysis. Energies. 2021; 14(14):4153. https://doi.org/10.3390/en14144153
Chicago/Turabian StyleBortnowski, Piotr, Lech Gładysiewicz, Robert Król, and Maksymilian Ozdoba. 2021. "Models of Transverse Vibration in Conveyor Belt—Investigation and Analysis" Energies 14, no. 14: 4153. https://doi.org/10.3390/en14144153